Used automation in Switzerland

2003 FEINTOOL MFA 1600 42972

• Manufacturer: FEINTOOL

!! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...

2003 NEFF DP 800 46230

• Manufacturer: Neff

Complete hot forming line consisting of: * Hydraulic press NEFF 800 to. * Ruhstrat furnace system: - Natural gas heating - Temperature 930°C - max. lining width: 1850 mm - Furnace length: 10800 mm * Strothmann Fe...

2007 HAAS VF-11B/40HE 54262

• Manufacturer: Haas
• Model: VF-11B

Under power A lot of tools Delivery to enduser 2008

LIGHT CURTAIN “SICK” TYPE C-4000

• Manufacturer: Sick

L=1000 mm.

DC MOTOR WITH PERMANENT MAGNET “ESTAN” TYPE GfmO 8/4

180V – 75W – 0,52A – 3000min-1 – IP44

MOTOR “GRUNDFOS” TYPE MG 100 LA4

• Manufacturer: Grundfos
• Model: MG100LA4

220/380V – 50Hz – 0.7/5.6A – 1410 min-1 Weight: 18 kg

2018 YASKAWA MOTOMAN MPL500 II 43487

• Manufacturer: Yaskawa - Motoman

4-axis palletizing robot as good as new, never in use Payload 500 kg Up to 1200 cycles/hour Vertical reach 3024 mm Horizontal reach 3159 mm Weight 2300 kg 2 units available

ELECTRIC MOTOR “D” TYPE DP80B

380V – 0,6/0,8 Kw – 50Hz – 1400/2800 min-1

2003 LOIRE SAFE EDIMR 800 46229

• Manufacturer: Loire Safe

Complete hot forming line (sheet metal application)consisting of: * Hydraulic press LOIRE SAFE 800 to. * Schwartz GA1534 furnace system: - max. lining width: 1.500 mm - Inner furnace length: 20.000 mm - Inner hei...

1996 PLATARG 2513 46301

• Manufacturer: PLATARG

Can be tested in operation Max. Flywheel speed: 760 1/min. Capacity on one stage approx. 25T Clutch engagement max. 10/min Air pressure 5.5 bar (min) - 5.8 bar (max) Total deceleration time Braking <250 ms Zig...

2007 HAAS VF-2 SSHE

• Manufacturer: Haas
• Model: VF-2
• Spindle taper: BT 40

Control: HAAS AUTOMATION | Number of axis simultaneous: 3 | Table length: 914 mm | Table width: 356 mm | Table load max.: 680 kg | Longitudinal travel (x-axis): 762 mm | Transversal travel (y-axis): 406 mm | Ver...

Temperature Control Unit - Huber - HTS 30-H12 - VP052-VP059

• Manufacturer: Huber
• Model: HTS 30-H12

Control via Pilot ONE 8 Units Available Heating: 12 kW | Max. pump: 4.7 bar at 70 L/min | Connection: G 1 1/4" | Dimensions: 940 x 1050 x 1130 mm | Weight: 273 kg

Temperature Control Unit - Huber - Unichiller 180TW-H18 - VP046-VP051

• Manufacturer: Huber

Control via Pilot ONE 6 Units Available Heating: 18 kW | Max. cooling: 18 kW | Max. pump: 4.7 bar at 30 L/min | Connection process: G 1 1/4" | Connection cooling water: G 3/4" | Dimensions: 760 x 920 x 1612 mm |...

2002 FEINTOOL HFA 8800 PLUS 36813

• Manufacturer: FEINTOOL

Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Returning velocity: 200 mm/s | Nominal force: 6...