Building Filters
Wayne Lab Monofilament Extrusion Line With Auxiliary Cast Roll Station
Wayne Lab Monofilament Extrusion Line With Auxiliary Cast Roll Station – 1″ Wayne Extruder, 30:1 L/D Ratio, Vented Barrel, Air- Cooled Barrel, 3 HP AC
Rockville Centre, NY- Trusted Seller
Wayne Lab Monofilament Extrusion Line With Auxiliary Cast Roll Station
- Manufacturer: Wayne
Used Wayne Lab Monofilament Extrusion Line With Auxiliary Cast Roll Station Air Cooled, 6 Die Zones, With Melt Temp, Extruder RPM, And Motor Load, Has Gefran Pressure Transducer With Readout, Includes Screw. 42" ...
United States - Trusted Seller

2008 HERTWICH ALUMINUM EXTRUSION LOG SAW
- Manufacturer: Hertwich
Used Hertwich Aluminum Extrusion Log Sawing System: EX-475 (Located in a Vertical DC Log Casting plant) Manufacture: - Hertwich - Commissioned new in April 2008 - Decommissioned 2016 Condition: - One owner, ...
Banner Elk, NC - Trusted Seller

CAST FILM TAKE OFF 65" Wide
- Manufacturer: CAST FILM TAKE OFF
Used 65" wide cast film type take-off consisting of 3-8" diameter chill rolls, edge trim station, and turret winder for 18" diameter rolls. Includes end fed die 48" wide previousley used 0-20 mil vinyl.
Hainesport, NJ - Trusted Seller

87" Chippewa Valley Masterflex 10-40 Film Extrusion Die
- Manufacturer: Valley
Used 87" Chippewa Valley Masterflex 10-40 manual film extrusion die. Manually adjusted Seven (7) heating zones. Die was previously producing 0.6 - 4 mil cast film. Includes feedblock
- Trusted Seller

EDI-Nordson AUTOFLEX H40 70 in. Film Extrusion Die
- Manufacturer: EDI
Used EDI-Nordson AUTOFLEX H40 70 in. Film Extrusion Die Serial No. 90-13799 s/n documentation from Nordson/EDI is pending to confirm: Manually adjusted Number of heating zones TBD. Die was previously ...

VETAPHONE CORONA PLUS CP1 1KW 15083
Vetaphone Corona Plus generator model CP1 1kW. Includes TF415 control and model HP1014C300 static unit, S/N 614600.
Elk Grove Village, ILAluminum Extrusion Clamp On Feet, Base Plate Feet 1.5" Pocket
- Manufacturer: ALUMINUM
Clamp Style Feet For Aluminum Extrusions 1.5" x 3" Deep Extrusion Pocket - 2 positions 5.5" x 5.5" base 20 available list price is per unit $200 For All 20 ($10 Each) some have missing hardware but can be bought ...
Watertown, CT- Trusted Seller
Tempco CBH07302 Cast In Band Heater 1000W 208V F0729
- Manufacturer: Tempco Electric Heater Corporation
“New, in open box.” Tempco CBH07302 Cast In Band Heater 1000W 208V F0729 Tempco CBH07302 Cast In Band Heater 1000W 208V F0729 Tempco : The manufacturer, Tempco Electric Heater Corporation, specializes in industri...
$360 USDFleetwood, PA 
SawStop 1-3/4HP 1PH 110-120V Contractor Saw with 30" Aluminum Extrusion Fence System
- Manufacturer: SawStop
The SawStop Contractor Saw offers versatility and safety in the shop and stability and mobility on the jobsite. It delivers the performance you need with the peace of mind only SawStop’s patented safety system ca...
Dundee, NY
Rockville Centre, NY
CLOEREN EBR III 56″ WIDE 14425
Cloeren EBRIII, 56″ wide cast film die body, S/N 00-6613-17, 1.25″ X 4.75″ rectangular feed entry, 31 kW, 2,450 Lbs.Two are available.
Elk Grove Village, IL- Trusted Seller
2011 REIFENHAUSER 112" WIDE
- Manufacturer: Reifenhäuser
Used Reifenhauser 3 Meter Wide (112" Finished) 5-Layer Cast Film Extrusion Line (less extruders). New 2011. Package previously used for EVA, ULDPE, LLDPE, LDPE, with a majority of the product last run on the PP. ...
Hainesport, NJ - Trusted Seller
Black Clawson 54" Wide
- Manufacturer: Black Clawson
Unused 54" wide Black Clawson extrusion coating station. Station consists of a primary casting roll (not installed) approximately 36" O.D. X 54" wide with a 16" O.D. X 54" rubber stripper roll mounted with air cy...
Hainesport, NJ - Trusted Seller

Welex 88"
- Manufacturer: Welex
Used Welex cast station only consisting of an 18" X 88" cast roll mounted on frame, with drive. Serial #8441. Includes 5 HP main drive with 176/1 ratio euro drive gearbox. Includes 5 HP water pump and heat exchan...
Hainesport, NJ
