Used cfm

Blower 38,300 m3/h (22,550 CFM) - IPP# 103633

• Manufacturer: Aktiengesellschaft Kohnle

@ 6700 mm Wg radial blower mfg: Kopp and Kausch 831 KW, 1153 Kg/cu meter Type 1LA3345 driven by Motor thru Voith speed increaser

Blower 10,200 m3/h (6,000 CFM) - IPP# 1821

• Manufacturer: Allis Chalmers

Single stage centrifugal blower/compressor 6 psig max discharge pressure 6" suction opening, 12" discharge 3600 rpm operating speed

Blower 3,750 m3/h (2,200 CFM) - IPP# 225230

• Manufacturer: Lamson

2200 SCFM cast steel 4-stage 2200 SCFM SO #62626 20 HP inlet vacuum 4" Hg (13.1" Hg max) inlet temperature 80 degrees F

Blower 2,000 m3/h (1,200 CFM) - IPP# 225229

• Manufacturer: Lamson

cast steel 4-stage blower/exhauster 2200 SCFM SO #62626 20 HP inlet vacuum 4" Hg (13.1" Hg max), inlet temperature 80 degrees F driven by 15kw, 3/50/415 volt, 2920 rpm motor,

9740 CFM

Unused carbon steel centrifugal blower fan driven by EL motor 11 kW, 1480 rpm, 400/690 V, 50 hz. Working output up to 16488 M3/h. Working temperature up to 20°C. Working outlet pressure 1480 pa. Working rotation ...

5784 CFM

Unused carbon steel centrifugal blower fan belt driven by el motor 11 kW, 1460 rpm, 400/690 V, 50 hz. Working output up to 2.73 m3/sec (9828 m3/h). Working temperature up to 450°C. Working outlet pressure 1100 Pa...

5890 CFM

Unused carbon steel centrifugal blower fan belt driven by el motor 11 kW, 1460 rpm, 400/690 V, 50 hz. Working output up to 2.78 m3/sec (10008 m3/h). Working temperature up to 450°C. Working outlet pressure 1100 P...

23 CFM AEC Dehumidifying Wheel Dryer with Hopper 460V

• Manufacturer: AEC

Model: RDC-P-25 | Hopper capacity (l):: 44 | Dew point °c:: <-40 | Drying temperature °c:: Max. 80 - 160 | Air flow rate (cfm):: 23 | Voltage:: 460/3/60 | Includes: Hoses, Clamps, Wand & Receiver | Cfm: 23

Great Lakes Air Systems DFX-48X48 Welding Smoke Filtration Collector 6000 CFM

• Manufacturer: Great Lakes
• Model: DFX-48X48

Used, in Good Working Condition. Removed From a Working Environment. Tested. Wired for 480V 3Ph. Has 7.5 hp motor. 230/480V. 48" Entry. Has replaceable filters. Comes with some ductwork. 18" pipes and flex pipe. ...

Blower 1,350 m3/h (800 CFM) - IPP# 219236

• Manufacturer: Aerzener Maschinenfabrik GmbH-Germany

(GG20) cast steel Rotary blower only p1 1,0 bar,p2 0,5 bar openings: (2) DN200 without motor

Cincon CFM36SB150-T

• Manufacturer: Cincon

AC/DC Power Modules 36W 15V 2.4A Class II Wafer

Cincon CFM04S120-E

• Manufacturer: Cincon

AC/DC Power Modules 4W 12V 333mA Encap

Cincon CFM202S280C

• Manufacturer: Cincon

AC/DC Power Modules 200W 28V 5.35A Cov

Cincon CFM20S050-T

• Manufacturer: Cincon

AC/DC Power Modules 20W 5V 4A Wafer

Cincon CFM20S120-T

• Manufacturer: Cincon

AC/DC Power Modules 20W 12V 1.67A Wafer