Used chisel in Groningen, Netherlands

Kraffter SB Overtopfrees

• Manufacturer: Kraffter

The Kraffter SB overtop cultivator is suitable for light tractors from 25hp to 60hp. Available in various working widths (1.25m, 1.45m and 1.65m). Because the cultivator turns in the opposite direction, the soil ...

Kraffter SB Overtopfrees

• Manufacturer: Kraffter

The Kraffter SB overtop cultivator is suitable for light tractors from 25hp to 60hp. Available in various working widths (1.25m, 1.45m and 1.65m). Because the cultivator turns in the opposite direction, the soil ...

Scm thicknesser planer 52

• Manufacturer: SCM / SCMI

Beautiful scm planer Planer Model 52 520mm planing width 250mm planing height Equipped with tersa chisel axis 4 tersa chisels Automatic high low 4 columns underneath Multiple feed rates

2022 Amazone KX 3001 / CATAYA 3000 SUPER

• Manufacturer: Amazone
• Model: KX3001
• Horsepower: 88.5074578636913 horsepower
• Working width: 3 meter

20 rows, row spacing 15 cm, electric metering drive 3000 right, electric calibration with TwinTerminal 3.0, LED rear lighting for road travel Cataya Super, 20 TwinTeC coulters for Cataya 3000 Super with 20 TwinTe...

LEFA LF

• Manufacturer: Lefa

The overtop cultivator is for cultivating soil with stones and tall grass. It works differently from a normal tiller because it turns in a different direction from the tractor's direction of travel. The soil is b...

2023 Amazone KX 3001/ CATAYA 3000 SUPER #300045929

• Manufacturer: Amazone
• Model: KX3001
• Horsepower: 88.5074578636913 horsepower
• Working width: 3 meter

KX 3001/ CATAYA 3000 SUPER Amazone sowing combination 213322 Rotary cultivator KX 3001 EJ647 PTO shaft Walterscheid P 500, 760 mm 211139 Special handle tine set 228890 Side guide plate can be extended 214827 Mech...

2023 Amazone KG 3001 SUPER / CENTAYA 3000 SUPER #300047858

• Manufacturer: Amazone
• Model: KG3001
• Horsepower: 215.904556303853 horsepower
• Working width: 3 meter

KG 3001 SUPER / CENTAYA 3000 SUPER Amazone sowing combination 213320 Rotary cultivator KG 3001 Super EJ648 PTO shaft Walterscheid P 500, 760 mm 211142 Tine set handle Super 211142 Tine set handle Super 228890 Sid...

SCM FS 520

• Manufacturer: SCM / SCMI
• Model: FS520

Planing width 520 mm. Height 250 mm. Tersa chisel axis with 4 blades. Electric height/low adjustment of the thicknessing table. Rollers in the table top. Table top folding pneumatically.

Duplicate of Kraffter Cultivator 9 teeth with roller CSR 120

• Manufacturer: Kraffter

Kraffter Cultivator 11-Ton with Roller CSR 120 - The Kraffter Cultivator is suitable for use with mini tractors and compact tractors Category 1. - The implement has a roller (the 140 cm 11-tine model is shown). D...

Striker FL4

Engine 4 HP. 380 Volt Rebate edge 16 mm. Length total 2550 mm. Feed table 1400 mm. Discharge table 1100 mm. Emergency stop Quick adjustment Slide adjustable. Chisel shaft with 2 blades.

Duplicate of Kraffter Cultivator 11 teeth with roller CSR 140

• Manufacturer: Kraffter

Kraffter Cultivator 11-tooth with roller CSR 140 - The Kraffter Cultivator is suitable for use with mini tractors and compact tractors Category 1. - The implement has a roller. Delivery is possible upon request. ...

Kraffter GF Grondfrees

• Manufacturer: Kraffter
• Working depth: 0.15 centimeter

The Kraffter GF tiller is suitable for small tractors, equipped with a chain drive on the side. The cultivator comes standard with a universal 3-point hitch with Cat. 1 or 2 coupling and a power take-off. The rot...

Kraffter GF Grondfrees

• Manufacturer: Kraffter
• Working depth: 0.15 centimeter

The Kraffter GF tiller is suitable for small tractors, equipped with a chain drive on the side. The cultivator comes standard with a universal 3-point hitch with Cat. 1 or 2 coupling and a power take-off. The rot...

Omach TH630

• Manufacturer: Omach

Max. planing height 300 mm. Motor 5.5 kW, 400 volt. Variable throughput 4 - 20 m./min. Table on 4 spindles. Electric table adjustment with digital readout and pre-programming. Rollers in the table top. Chisel sha...

Omach TH530

Planing height 300 mm., max. removal 8 mm. Motor 5 kW, 400 vol. Variable feed speed 4 - 20 m./min. Table on 4 spindles. Electric adjustment of the thicknessing table with digital readout and pre-programming. Roll...