Building Filters
- Trusted Seller
FEMIA E 76
- Manufacturer: FEMIA
Designed to snip green beans. Throughput is subject to the variety and dimensions of the product. Capacity: 600 kg/h - 800 kg/h depending on the product used. Drum diameter: 75 cm
Lorquí, Spain - Trusted Seller
FEMIA GREEN BEAN SNIPPER
- Manufacturer: Verdes
Designed to snip green beans. Throughput is subject to the variety and dimensions of the product. Capacity: 600 kg/h - 800 kg/h depending on the product to be used. Loading height: 1.50 m Downloading height: 1.17...
Lorquí, Spain - Trusted Seller
S/S LEAVE REMOVER, 70 CM DIAMETER
- Manufacturer: CHORLICA
Drum sizes: Drum diameter: 70 cm Drum length: 2.10 m Gap between bars: 2 cm
Lorquí, Spain - Trusted Seller
FEMIA E 62
- Manufacturer: FEMIA
Designed to snip green beans. Throughput is subject to the variety and dimensions of the product. Loading height: 1.60 m Unloading height: 1.35 m Drum's width: 80 cm Drum's length: 2.20 m Exit diameter: 57 cm
Lorquí, Spain - Trusted Seller
S/S LEAVE REMOVER, 70 CM DIAMETER
- Manufacturer: CHORLICA
Drum sizes: Drum diameter: 70 cm Drum length: 2.10 m Gap between bars: 2 cm
Lorquí, Spain - Trusted Seller
S/S ERMS UNSNIPPED BEAN REMOVER
- Manufacturer: ERMS
Unsnipped bean remover. This machine will separate the unsnipped beans just after snipping from the good one, this non conform products will then be returned to snipper. The capacity will depend on the product to...
Lorquí, Spain - Trusted Seller
S/S ERMS UNSNIPPED BEAN REMOVER
- Manufacturer: ERMS
Unsnipped bean remover. This machine will separate the unsnipped beans just after snipping from the good one, this non conform products will then be returned to snipper. The capacity will depend on the product to...
Lorquí, Spain - Trusted Seller
2007 24HL Puleo Press | AZ11
- Manufacturer: Puleo
24HL Puleo open drum press + hopper for whole cluster feeding. Regularly serviced by Carlsen. 37" ground clearance for emptying into bins. Large 54L x 50W x 24H juice pan.
- Trusted Seller
Approximately 3,000 - 6,000 TPD Process Plant Equipment, including FLSMIDTH Ball & Rod Mill, Flotation, Thickeners, Filters, Screens, Cyclones, Feeders and More!
- Manufacturer: FLSmidth
Approximately 3,000 - 6,000 TPD Process Plant Equipment, including FLSMIDTH Ball & Rod Mill, Flotation, Thickeners, Filters, Screens, Cyclones, Feeders and More! FLSmidth 14'1" x 21' (4.3m W. x 6.4m L) Rod Mill 1...
North America - Trusted Seller
Cummins VTA1710 – 400KW Diesel Generator Set
- Manufacturer: Cummins
- Horsepower: 590 hp
- Hours: 1,700 h
Pre-owned Cummins VTA-1710-GS Diesel Generator Set – Rated at 440KW, 60Hz, 120/208V, 1800RPM – Includes Engine Driven Radiator, Heavy Duty Air Cleaner Housings, Analog Engine Gauge Cluster – Open Skid Mounted – A...
- Trusted Seller
2019 Illumina NextSeq 550
- Manufacturer: Illumina
Illumina DNA/RNA Sequencer NextSeq 550. Transcriptomics, Exome sequencing. when using High-Output kits. Up to 130 million clusters per run when using Mid-Output kits. With internal HDD. Software preinstalled. Dat...
- Trusted Seller
1990 Caterpillar G3408 – 250kW Natural Gas Generator Set
- Manufacturer: Caterpillar
- Model: G3408
- Horsepower: 362 hp
- Hours: 1,164 h
Pre-owned Caterpillar G3408 Natural Gas Generator Set – Rated at 270KW, 338KVA, 60Hz, 120/240V (12 lead), 1800RPM – Includes Engine Driven Radiator, Jacket Water Heater, Control Panel, Engine Gauge Cluster – Open...
- Trusted Seller
Caterpillar G3408 – 250kW Natural Gas Generator Set
- Manufacturer: Caterpillar
- Model: G3408
- Horsepower: 362 hp
- Hours: 1,553 h
Pre-owned Caterpillar G3408 Natural Gas Generator Set – Rated at 270KW, 338KVA, 60Hz, 120/240V (12 lead), 1800RPM – Includes Engine Driven Radiator, Jacket Water Heater, Control Panel, Engine Gauge Cluster – Open...
- Trusted Seller
Valve, Shut-Off, 3", 316L Stainless Steel, GEA, Model MBO-OD3, Double-Seat #S744920
- Manufacturer: GEA
GEA 9-Valve Air Valve Cluster, Type MBO-OD3"-SZ-TM1-L3BA1-BE5, includes (9) GEA double-seat valves, with associated Stainless-steel Manifold, and Think Tops. Constructed of 316L stainless steel contacts, 3" inlet...
San Dimas, CA - Trusted Seller
6.6” x 0.28” DMC Tube Mill Line
- Manufacturer: DMC
Specifications: Tube OD Max: 6.63” (168.3 mm) / Min: 2.00” (50.8 mm) Wall Thickness Max: 0.276” (7.0 mm) / Min: 0.055” (1.4 mm) Tube Cut Length Max: 39.37’ (12,000 mm) / Min: 19.69’ (6,000 mm) Line Speed Max:...
United States
