• 2013 DOOSAN LYNX 220LMSC MULTI-AXIS CNC LATHE TK-20574

    $74,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Doosan

    x-axis: 8.1″ z-axis: 21.7″ b-axis: 21.7” rapid traverse (x-axis): 1,181 ipm rapid traverse (z-axis): 1,417 ipm rapid traverse (b-axis): 1,181 ipm cutting feedrate: 19.7 ipm spindle speed: 4,500 rpm...

  • 2010 SUMMIT 26-6X120 CNC LATHE GP-20508

    $74,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Summit

    spindle bore: 6.1″ spindle nosse: a2-11 spindle speed ranges (3): 11 – 1000 rpm cross slide travel: 16” longitudinal travel: 110” z-axis feed rate: 0-196 ipm x-axis feed rate: 0-196 ipm tailstock q...

  • 2012 CHEVALIER FBL-360B CNC LATHE TK-20550

    $79,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Chevalier
    • Distance between Centers: 40.1”

    spindle nose: a2-11 spindle bore diameter: 4.1” maximum spindle speed: 2500 rpm bar capacity: 4.5” chuck size: 15” spindle motor: 35 hp transmission: 2-speed gearbox maximum torque: 933 nm @ 250 rp...

  • 1997 NAKAMURA TOME TW-30MMY 7-AXIS CNC LATHE JV-20555TK

    $79,500 - Bethlehem, PA, USA Recently Added
    • Manufacturer: Nakamura
    • Spindle Bore: 3.5”

    maximum spindle speed: 3,600 rpm spindle drive motor: 30 hp c-axis rotation: 0.001 degree number of stations: 12 number of driven tool stations: 12 y-axis travel (left turret only): +/- 2.75” drive...

  • 2008 HAAS SL-40 2-AXIS CNC LATHE TK-20468

    $69,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    chuck size: 15″ standard bar capacity: 4″ between centers: 51″ maximum cutting diameter: 25.5″ maximum cutting length: 44″ maximum cutting length w/standard workholding: 42.5″ maximum speed (gearbo...

  • 2000 TOPPER TNL-100A CNC LATHE HB-20430IP

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: TOPPER
    • Spindle Bore: 2.4”
    • Spindle Nose: A2-6

    motor: 20 hp dimensions: 144” lr x 56” fb x 68” h weight: 7,770 lbs fanuc o-tb control 5c collet chuck topper bf-1200 barfeeder chip conveyor parts conveyor tailstock since we are acting as a broke...

  • 2000 HWACHEON HI-TECH 100B CNC LATHE HB-19918

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Hwacheon

    spindle nose: a2-6 maximum spindle speed: 6,000 rpm hole through spindle: 3” bar size: 1.75” motor: 15 hp spindle bearing size: 3.9” number of tools: 12 tool size: 1” x 1.3” rapids (x/z): 1,180 ipm...

  • 1996 HARDINGE CONQUEST T42 CNC LATHE CK-20091

    $22,000 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    standard: 10 hp torque rating: 42 ft-lb speed range (1-rpm steps): 50 to 5,000 rpm swing diameter over upper way cover: 21.2″ preloaded ball screw diameter: 1.259″ maximum x-axis travel: 5.31″ x-ax...

  • 2003 MILLTRONICS ML15 SERIES G CNC LATHE HB-20175

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Milltronics

    spindle bore: 2.18″ horsepower, 1 min/30 min: 7.5/5 hp spindle nose type: camlock d1-6 spindle taper: mt #6 spindle speed: 20 – 3,000 rpm programmed by cnc, low: 20 – 200 rpm programmed by cnc, med...

  • 1991 HARDINGE GT-27SP GANG TOOL CNC LATHE JV-20350TK

    $24,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    x-axis: 12″ z-axis: 11″ x-axis traverse rate:    472 ipm z-axis traverse rate:    630 ipm spindle motor: 5 hp speed range: 60 – 6,000 rpm allowable weight on spindle: 11.259″ 5c spindle work holdin...