Building Filters
- Trusted Seller
Hardinge GT27 Super Precision Lathe
- Manufacturer: Hardinge
- Model: GT27
Power 5 hp Max RPM 6,000 RPM Swing 11.76″ Dimensions 72″ x 60″ x 72″ H Weight 5,700 Lbs ControlCNC (Fanuc 18i-B CNC)
Upper Saucon Township, PA - Trusted Seller
2001 Okuma Model MacTurn 30 Multi Axis CNC Lathe
- Manufacturer: Okuma
- Model: Macturn 30
Imperial Metric Running: 45,157:51 Operating: 12,758:40 Cutting: 10,243:53 Mill Spindle: 8,001:38 (actually is less than this, was replaced about a year ago) U100L control X & Y & Z axis milling 50 tool changer S...
Elk Grove Village, IL - Trusted Seller
2002 Milltronics ML-15
- Manufacturer: Milltronics
- Model: ML15
8" 3 Jaw Chuck 10" LCD Active Matrix Color Display Tailstock Electronic Hand Wheels for Manual Operation Coolant System Hardened / Ground Ways 220V 3-Phase
Ohio, USA - Trusted Seller
2010 Milltronics ML40/160 with 14" Big Bore Spindle, 31.5" 3 Jaw Manual Chuck, Tailstock, 12 Station Turret, (2) Steady Rests
- Manufacturer: Milltronics
- Model: ML40/160
14" Bar Capacity 31.5 3 Jaw Chuck (no jaws) Rear Mounted Chuck Flange with A2-20" Mount 12 Station Automatic Pragati Turret Tailstock (2) Steady Rests (Range of 50mm - 500mm) Remote Jog Handle Manual Hand ...
- Trusted Seller
2004 Doosan Puma 240LB
- Manufacturer: Doosan
- Model: PUMA 240LB
- Spindle bore: 82 mm
10" 3 Jaw Hydraulic Chuck Tool Presetter Chip Conveyor Tailstock Mist Collector Foot Pedal for Chuck PCMCIA Card Interface RS 232 Port Interface Boxed Ways Coolant Tank with Pump All Available Static Tooli...
- Trusted Seller
1999 Hwacheon Mega 95/5000 with 9" Bar Capacity, 197" cc, Tool Post, 25" Manual Chuck, Tailstock
- Manufacturer: Hwacheon
- Model: Mega 95
25" 3 Jaw Manual Chuck 9" Hollow Spindle Tailstock Manual Hand Wheels Status Lights RS 232 Port Interface Coolant System with Tank & Pump 3 Speed Geared All Available Tooling All Available Manuals
- Trusted Seller
2021 Quick Tech T8-Twin-Y Live Tool CNC Lathe ()
- Manufacturer: Quick-Tech
Quick Tech T8-Twin-Y Live Tool CNC Lathe (2021) Main Spindle Swing Over Bed: 19.7″ Main Spindle Swing Over Cross Slide: 11.8″ Main Spindle Chuck Type: 8″ 3 Jaw Hydraulic Main Spindle Max Bar Capacity: 2.56″ Main ...
Elk Grove Village, IL 
Precision CNC Lathe – Famar Tandem 200
- Manufacturer: Famar
- Model: TANDEM 200
53417004 Used Famar Automatic CNC Lathe, Model Tandem 200. 150mm (5.9") max diameter; 140mm (5.5"); Working strokes: X x Z, 313mm (approximate 12.5") x 250mm (approximate 10"); 827mm X-axis total stroke; 90m/minu...
Belvidere, IL- Trusted Seller
Twin-Turret CNC Lathes
- Manufacturer: Okuma
This is a deal of a lifetime. AVAILABLE CNC EQUIPMENT – FULL INVENTORY MARKET VALUE:$650,000.00 CNC LATHES - (6) Okuma 2SP-250H Twin-Spindle / Twin-Turret CNC Lathes - High-production horizontal turning cente...
Illinois, USA - Trusted Seller
Milltronics MB20A 5 Axis CNC Bed Mill MB20A
- Manufacturer: Milltronics
- Model: MB20
Equipped with: Centurion 6 control Troyke TDL-10 trunnion table Splash pads
- Trusted Seller
2006 Fryer MC-10E CNC Vertical Machining Center
- Manufacturer: Fryer
- Spindle taper: CAT 40
Features: Anilam 6000i Touch CNC Control 16-Position Automatic Tool Changer CAT 40 Taper 8000 RPM CAPACITIES: Equipped With: Anilam 6000i Touch CNC Control 16-Position Automatic Tool Changer Flood Coolant 30 KVA ...
Illinois, USA - Trusted Seller
2007 Northwood 138 EDS - Stone Equipment - CNC Router
- Manufacturer: Northwood
- Model: 138
Condition (including hours used, if applicable): Notes From Seller: Over the years the machine has had the following work done to it. New z-laser in 2018 New vacuum pump in 2020 New spindle in 2021 New x axis bea...
Orion Township, MI - Trusted Seller
Hyundai HIT 30 S 2 Axis CNC Lathe
- Manufacturer: Hyundai
- Model: HIT-30S
- Spindle bore: 52 mm
Hyundai Model HiT 30S 2-Axis CNC Lathe EQUIPPED WITH: Z Axis Travel: 40.16″ X axis travel: 7.87″ Spindle Speeds: 30 – 3,000 RPM Maximum swing over bed: 20.08″ Maximum turning diameter: 12.6″ Maximum turning lengt...
Upper Saucon Township, PA 
2023 FLEX CNC FB-50-24
- Manufacturer: FLEX CNC
- Spindle taper: CT 40
hydraulic clamping system Mist Lubrication System Automatic tool setter Laser zeropoint detector Milling, drilling, tapping, and scribing capabilities Includes built in programming software
Daewoo Puma 240B CNC Lathe
- Manufacturer: Daewoo
- Model: Puma 240B
Good condition Daewoo Puma 240B CNC Lathes available between 2004 and 2005 years. Located in USA and other countries. Click request price for more information.
USA
