• 1992 EMCO VMC 200 VMC TK-20165

    $7,500 - Bethlehem, PA, USA
    • Manufacturer: Emco

    size: 25.5” x 12.75” maximum table load: 400 lbs t-slots: 3 slot distance: 3.93” turret: 12 stations tool change time: 7.6 seconds main motor: 13.5/9 hp speed range: 150 – 4,500 rpm equipped with e...

  • VIPER VT-27GL 2-AXIS CNC TURNING CENTER LATHE 5

    No price - Livonia, MI, USA
    • Manufacturer: Viper

    mighty viper vt-27gl 2-axis cnc turning center lathe serial number 8330405011         new 2006 general specifications: swing over z-cover 26.8" max. turning diameter 18.9" max. turning length 21.7"...

  • 2012 CHEVALIER FBL-360B CNC LATHE TK-20550

    $79,500 - Bethlehem, PA, USA
    • Manufacturer: Chevalier
    • Distance between Centers: 40.1”

    spindle nose: a2-11 spindle bore diameter: 5.3” maximum spindle speed: 2,500 rpm bar capacity: 4.5” chuck size: 15” spindle motor: 35 hp transmission: 2-speed gearbox maximum torque: 933 nm @ 250 r...

  • 2000 HAAS MINI MILL VMC HB-20603

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 2000 HAAS MINI MILL VMC HB-20605

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 2001 HAAS MINI MILL VMC HB-20604

    $27,500 - Bethlehem, PA, USA
    • Manufacturer: Haas

    length (total): 36″ length (work surface): 28.75″ width: 12″ maximum weight on table: 500 lbs t-slot width: .625″ number of t-slots: 3 center distance: 4.92″ taper size: # 40 taper speed: 0 – 6,000...

  • 1999 Haas VF3-APC 25892

    No price - Melville, NY, USA
    • Manufacturer: Haas
    • Spindle Taper: CAT 40

    serial no.: 17659 haas cnc, 1mb memory, quick code, user defined macros, coordinate rotation & scaling quick code floppy disk drive 4th axis ready (brush) 32-position automatic pocket tool changer ...

  • HOLZ-HER VERTICAL CNC MACHINING CENTER-EVOLUTION 7405-K

    No price - Grand Rapids, MI, USA
    • Manufacturer: Holz-Her

    machining in x-direction routing/profiling up to 57″ without re-clamping horizontal drilling up to 51″ without re-clamping maximum work piece length without additional support: 11-1/2′ with additio...

  • TAKISAWA MAC-V2 #5518

    No price - Baltimore, MD, USA
    • Manufacturer: Takisawa

    takisawa cnc vertical machining center mac-v2 with fanuc 6m cnc control model:  mac - v2 s/n: tmehr-4151 made in japan specifications: table size: 15-11/16" x 35-7/16" travels: x-axis travel:  22" ...

  • TAKISAWA MAC-V2E #5488

    No price - Baltimore, MD, USA
    • Manufacturer: Takisawa

    takisawa mac-v2e mc-compo cnc vertical machining center with fanuc 10m cnc control model:  mac- v2e  mc-compo s/n:  5071 made in japan specifications: table size: 15-11/16" x 35-7/16" travels: x-ax...