• 1997 LEADWELL MV-610 VMC HB-20188

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis: 24″ y-axis: 16.1″ z-axis: 20″ spindle nose to table: 5.1” – 25.2” spindle center to column: 17.7” spindle center to table center: + 8.1” table center to column: 9.64” – 25.8” spindle taper:...

  • 1995 LEADWELL MCV-760AP VMC HB-20429IP

    $9,500 - Bethlehem, PA, USA
    • Manufacturer: Leadwell

    x-axis travel: 29.92″ y-axis travel: 20.08″ z-axis travel: 20.08″ spindle nose to table: 6.299″ x 26.38″ spindle center to column surface: 21.65″ table center to column: 11.81″ – 31.89″ spindle mot...

  • 2007 BRIDGEPORT XR-700 HMC CK-20324

    $49,500 - Bethlehem, PA, USA
    • Manufacturer: Bridgeport

    x-axis: 787 ipm y-axis: 787 ipm z-axis: 787 ipm working surface: 31.5” x 20” load capacity: 550 lbs x 2 per pallet spindle taper: no 40 spindle speed range: 12,000 rpm spindle motor rating (s6-40%)...

  • 2012 HARDINGE GX-480-APC DRILL/TAP CENTER TK-20395

    $39,500 - Bethlehem, PA, USA
    • Manufacturer: Hardinge

    auto mode (x, y, z): 1417 ipm feedrate range (x, y, z): 0.1-590 ipm cutting feedrate: 472 ipm minimum increment: 0.00004” speed (belted): 10,000 rpm motor rating: 10 hp torque – 8000 rpm (15 min): ...

  • 1998 Weeke BP-80 Optimat Machining Center

    $19,950 - Sheboygan, WI, USA Recently Added
    • Manufacturer: Weeke

    good working condition, low hours price includes loading on a truck 2750mm x 900mm x 50mm working table 3030mm x 950mm x 100mm max panel size routing 11 individually selectable vertical boring spin...

  • 2007 MATSUURA ES550VPC2 VMC JV-20517CK

    No price - Bethlehem, PA, USA
    • Manufacturer: Matsuura
    • Spindle Taper: CT-40

    electrics: 200/220 volts, 3 ph, 50/60hz dimensions: will advise approximate weight: will advise matsuura g-tech 840dis cnc control (2) pallet changer 4th and 5th axis integrated through control tsu...

  • 2005 MATSUURA ES800VPC2 VMC JV-20516CK

    No price - Bethlehem, PA, USA
    • Manufacturer: Matsuura
    • Spindle Taper: CT-40

    electrics: 200/220 volts, 3 ph, 50/60hz dimensions: will advise approximate weight: will advise matsuura g-tech 840dis cnc control (2) pallet changer tsudakoma tn-131 5-axis rotary table auto power...

  • Bridgeport Series 1 w CNC

    No price - Saint Michael, MN, USA
    • Manufacturer: Bridgeport

    proto trak plus 2 axis control auto lub z axis read out

  • HOLZ-HER VERTICAL CNC MACHINING CENTER-EVOLUTION 7405-K

    No price - Grand Rapids, MI, USA
    • Manufacturer: Holz-Her

    machining in x-direction routing/profiling up to 57″ without re-clamping horizontal drilling up to 51″ without re-clamping maximum work piece length without additional support: 11-1/2′ with additio...

  • HMC: Mitsubishi MH-4B, Mits CNC, 4-Axis, 25

    No price - Chicago, IL, USA
    • Manufacturer: Mitsubishi
    • Spindle Taper: CAT 40

    (1) used mitsubishi 4-axis horizontal machining center,model mh-4b, new 1997 mitsubishi meldas cnc controls 60-position automatic tool changer full fourth axis chip auger chip conveyor kurt angle v...