Building Filters
- Trusted Seller
1990 AIDA FMX-L2-3000 #2200917
used
- Manufacturer: Aida
- Model: FMX-L2-3000
SPECIFICATIONS: AIDA 3000 Ton Cold Forging Press 22.83" STROKE 2" POWER RAM ADJUSTMENT 47.24" SHUT HEIGHT 14 - 20 SPM 86.6" x 53.15" BED 86.6" x 53.15" RAM HYDRAULIC OVERLOADS HYDRAULIC TIE ROD NUTS MICRO INCHING...
Toledo, OH - Trusted Seller
Asahi Okuma AT-635 2D/2B Cold Header
used
- Manufacturer: Okuma
SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * TONS of TOOLING!!
Byron, IL - Trusted Seller
Nakashimada PF-860 2D/3B Cold Header 5/16″
used
- Manufacturer: Nakashimada
8mm NAKASHIMADA PF-860 2-DIE/3-BLOW COLD HEADER WITH FINGERLESS TRANSFER SPECIFICATIONS: MAX. 1 ST MAX. 2 ND MAX. PRODUCTION RATE: 50 – 120 PPM FEATURES: POSITIVE KNOCKOUT IN 2 ND & 3 RD PUNCH DIE RELIEVING KNOCK...
Byron, IL 
2014 AIDA CF1-220
used
- Manufacturer: Aida
- Model: CF1-220
Preliminary Specifications Aida Straight Side Link Motion Cold Forging Single Point Press Model CF1-220 Year 2014 220 Ton Force 11.81" Stroke (300mm) 19.68" Die Height (500mm) 1.18" Slide Adjustment (30mm) 29.53"...
Detroit, MICold Header 3 mm, 1 Die 2 Blow P-371 AP
used
“Good Usable Condition- May Require some attention” Cold Header 3 mm, 1 Die 2 Blow Make: Ayase Model AS-OH Serial #: 53602 This machine has been covered and protected but it was outside. Although the owner believ...
$4,500 USDBay Shore, NY- Trusted Seller
1991 FUKUI 1000 TON MECHANICAL SINGLE CRANK COLD FORGING PRESS
used
- Manufacturer: Fukui
The 1991 FUKUI 1000 Ton Mechanical Single Crank Cold Forging Press is a used industrial press designed for heavy-duty applications. The model MSF 1000 boasts a substantial tonnage of 1,000 with a stroke length of...
United States - Trusted Seller
Press Cold Forging Aida FMX-L2-3000
used
- Manufacturer: Aida
- Model: FMX-L2-3000
Aida 3 Axis Transfer System : Capacity : 3000 tons, Stroke : 575 mm, Power ram adjustment : 50 mm, Shut height : 1175 mm, Stroke per min : 14-20, Bed : 2175 x 1325 mm, Ram : 2175 x 1325 mm, Hydraulic over...
United States - Trusted Seller
National
used
- Manufacturer: National
DOUBLE STROKE SOLID DIE COLD HEADER Capacity: 3/16X1" | Cutoff diameter: 3/16" | Shank length: 1" | Cutoff length: 1-3/4" | Speed: 225 Pieces per Minute | Weight,approx: 4,100 Lbs.
Vaughan, Canada - Trusted Seller
1977 NAKASHIMADA H-20AU
used
- Manufacturer: Nakashimada
DSSD COLD HEADER Maximum Wire Diameter: 6.0mm (.237") Maximum Cut-Off Length: 70mm (2.755") Max Shank Length: 55mm (1.968") Production Speed: 180-200ppm Main motor: 7.5hp Net Weight,approx: 7,500 lbs
Vaughan, Canada - Trusted Seller
NATIONAL 164
used
- Manufacturer: National
4 DIE HIGH SPEED COLD NUT FORMER Capacity: 5/8" | Number of dies: 4 | Nut size: 5/8" (16MM) | Maximum nut height: 11/16" (17.5MM) | Max. across flats, hex: 15/16" (24MM) | Production speed: 200PPM | Weight (appro...
Vaughan, Canada - Trusted Seller
1996 ASAHI OKUMA AT-635
used
- Manufacturer: Okuma
- Model: AT-635
2 DIE 2 BLOW COLD HEADER * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * LOTS of TOOLING
Vaughan, Canada - Trusted Seller
1993 NAKASHIMADA NP-40
used
- Manufacturer: Nakashimada
2 DIE 3 BLOW COLD HEADER Cutoff Diameter Range: 2.5mm - 4mm Max Cutoff Length: 25mm Max. Shank Length: 30mm Max. Transferable Length: 35mm Die Kickout (1st): 50mm Die Kickout (2nd): 30mm Max. PKO Stroke: 15mm O...
Vaughan, Canada - Trusted Seller
2004 Jern Yao JNF-17B5S
used
- Manufacturer: Jern Yao
5DIE COLD NUT FORMER Forging Stations: 5 Max. Cutoff Dia: 17mm Max. Kickout-Length: 20mm Max. Cutoff Length: 13mm Products, Size: 3/8" (M10) Output: 250ppm Main motor: 30hp Forging Power: 110ton Machine Weight: 1...
Vaughan, Canada - Trusted Seller
2008 LIAN SHYANG LS-C-NF-24B6S
used
- Manufacturer: LIAN SHYANG
5/8" 6 DIE COLD FORMER Number of Dies: 6 Forging Stations: 6 Max. Cut-Off Dia: 24mm Max Cut-Off Length: 30mm Max. Kick Out Length: 35mm Products (Nut): M12-M16 Dies Pitch: 100mm Ram Stroke: 110mm Forging Power: 2...
Vaughan, Canada - Trusted Seller
GRABENER GKN 400/1000/450
used
- Manufacturer: GRABENER
CALIBRATING & COLD FORGING PRESS Capacity: 55kW | Mode of operation: Mechanical | Pressing power: 400 t | Hub stroke: 400mm | Strokes per min: 16-30 | Shut height: 1160mm | Die weight: max 3000 kgs. | Total weigh...
Vaughan, Canada
