Used controller in Bern, Switzerland

2011 DRYPOINT RA 100

• Manufacturer: DRYPOINT

Nominal volume flow: 630 m3/h | Max. inlet temperature: 70 °C | Machine's weight about: 94 kg | Length: 625 mm | Width: 555 mm | Height: 975 mm

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

2016 OKUMA MULTUS U4000 Ref No: 51703

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

Object: 51703 | Controls: OKUMA OSP P300S | Number of spindles: 2 | Number of turrets: 1 | Live positions: yes | Number of c-axes: 2 | Number of b-axes: 1 | - positioning/indexing: 0.001 ° | Spindle revolutions...

2004 STAR SE-12B

• Manufacturer: Star
• Model: SE-12B

MAIN SPINDLE COUNTER-SPINDLE GUIDE BUSH HOLDER 1 SECONDARY OPERATION POWER SUPPLY - Parts catcher - Coolant tank * with high-pressure pump Used Machine tools for sale

2001 TORNOS MULTIDECO 20/8

• Manufacturer: Tornos
• Model: Multideco 20/8

- maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor - turning...

2001 SCHAUBLIN 125 CCN-R

• Manufacturer: Schaublin
• Model: 125CCN

Control manufacture: FANUC | Control manufacture model: 18i | Turning diameter: 270 mm | Center height: 125 mm | Distance between centres: 600 mm | Turning length: 400 mm | Turning diameter over cross slide: 11...

2007 INDEX G250

• Manufacturer: Index
• Model: G250

MAIN SPINDLE TAILSTOCK TURNING-MILLING SPINDLE TOOL CHANGER POWER SUPPLY WEIGHT & DIMENSIONS MACHINE HOURS - Number of turning-milling spindle hours : 7.891 [h] * with paper filtering unit - Coolant through spind...

2005 TORNOS MULTIDECO 20/6b

• Manufacturer: Tornos
• Model: Multideco 20

- Barrel locking with Hirth teeth MACHINE HOURS - TORNOS TB DECO CNC - Spindle stop - Counterspindle with counter-operation device - Single end milling machine - Polygon milling machine - Central block drilling m...

1994 SCHAUBLIN 125 CCN

• Manufacturer: Schaublin
• Model: 125CCN

- numerical control FANUC 20-T - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump Used Machine tools for sale

1996 WIRTH & GRUFFAT CENTROFLEX

• Manufacturer: Wirth & Gruffat
• Model: CENTROFLEX

MAIN SPINDLE WEIGHT & DIMENSIONS - Coolant tank Used Machine tools for sale

2000 GILDEMEISTER GD 12

• Manufacturer: Gildemeister
• Model: GD 12

Used Machine tools for sale Max. bar diameter: 12,7 [mm] | X stroke: 85 [mm] | Y stroke: 150 [mm] | Z stroke: 160 [mm] | Spindle speeds: 12000 [rpm] | Number of axes: 5 | Cnc: Fanuc 18 i-T | Bar loader: IEMCA CH ...

2013 CAZENEUVE Optimax 360

• Manufacturer: Amutio - Cazeneuve
• Model: Optimax 360

Control manufacture: SIEMENS | Control manufacture model: Optica | Turning diameter over bed: 380 mm | Center height: 180 mm | Distance between centres: 700 mm | Turning diameter over cross slide: 200 mm | Hole...

2004 TORNOS MULTIDECO 32/6i

• Manufacturer: Tornos
• Model: Multideco 32/6

- strokes of the cross slides - strokes of the cross slides - numerical control TORNOS PNC DECO - spindle stop pos 4 - numerical sub-spindle with counter operation device - parts catcher with conveying strip - 5 ...

2007 GILDEMEISTER CTX 620 LINEAR V1 Ref No: 54089

• Manufacturer: Gildemeister
• Model: CTX 620 LINEAR V1
• Spindle bore: 180 millimeter

Object: 54089 | Controls: SIEMENS 840 D | Design principle: inclined bed | Number of spindles: 1 | Number of x/z slides: 1 | Number of turrets: 1 | Live positions: no | Swing diameter (max): 800 mm | Turning di...

2015 OKUMA MULTUS U 4000-2SW 2000 Ref No: 50716

• Manufacturer: Okuma
• Model: Multus U4000
• Spindle bore: 112 millimeter

-Big Bore left spindle: Spindle holder A11 (Din 55026) Chuck is a SMW KNCS-N 325-104 - Tool holder (top) Milling spindle (Capto C6)