Building Filters
2011 Daiei DL530x100
- Manufacturer: Daiei
CNC Control: FANUC 20i-TB Spindle Speed: 1,700 rpm 3-jaw Chuck: 10 inches (Through Hole Diameter: 80 mm) Distance Between Centers: 1,000 mm Swing Over Bed: 530 mm Swing Over Tool Post: 300 mm
Japan
2004 Mori Seiki NL3000Y/700
- Manufacturer: Mori Seiki
- Model: NL-3000Y/700
Used Mori Seiki NL3000Y/700 CNC Lathe manufactured in 2004. Equipped with MSX-850 control, Kitagawa 15" hollow power chuck, tailstock, and V-10 turret. Includes chip conveyor with tank.
Japan
2012 Mori Seiki NLX2500SY
- Manufacturer: Mori Seiki
- Model: NLX 2500
M730BM Main sub collet chuck (Riken/SAD-40) 12 square turret with right exit chip conveyor with parts catcher with conveyor for carry out Auto bar 2.5 specification (Alps/ASR X-65P/2011) If there is any differenc...
Tatebayashi, Japan
2020 Nakamura-Tome Precision Industry WY-100II
- Manufacturer: Nakamura-Tome
FANUC Main: Collet chuck (SAD50) Sub: 6-inch 3-jaw chuck (Kitagawa/B206) Upper: 12-square turret (with Y axis, 24-position indexing) Lower: 12-square turret (with Y axis, 24-position indexing) With upper/lower to...
Tatebayashi, Japan
1998 Miyano BNE-51S
- Manufacturer: Miyano
- Model: BNE51S
FANUC18-T Main and sub collet chuck Upper turret 12 square (combined type) Lower turret 10 square (combined type) With parts catcher With workpiece discharge conveyor With mist collector With right hand chiff con...
Tatebayashi, Japan2008 INDEX MS22C
- Manufacturer: Index
- Model: MS22C
SIEMENS 5 O.D. bites can be mounted 1 rotary tool can be mounted 4 end face drilling can be mounted 4m auto bar specification (IEMCA) If there is any discrepancy between the contents and the actual product, the a...
Tatebayashi, Japan
2012 Mori Seiki NZX1500/800STY2
- Manufacturer: Mori Seiki
- Model: NZX-1500/800
FANUC31iA 6-inch 3-jaw chuck for both main and sub (Kitagawa/BB206) 16-corner turret (top 2 pcs (left: combined), bottom 1 pc (combined)) Right-feed chip conveyor 51Φ through diameter for both main and sub If the...
Tatebayashi, Japan
2005 Tsugami TMU-1
- Manufacturer: Tsugami
- Model: TMU1
FANUC18i-TB Main: Collet chuck (φ38) Sub: Collet chuck (φ38) 16 square turret 60 ATC with parts catcher With work conveyor With tool presetter With chip conveyor With medium pressure coolant unit (filtration devi...
Tatebayashi, Japan
2008 Citizen A16 IP
- Manufacturer: Citizen
- Model: A16
FANUC0i-TB Rotary guide bush 5 O.D. bytes can be installed 4 end-face drilling mains Automatic fire extinguishing device Auto bar 2.5m specification (Ikura/SA16C-6C/2008) If there is any difference between the co...
Tatebayashi, Japan
2001 Citizen M-16
- Manufacturer: Citizen
- Model: M16
MELDAS Rotary guide bush Sub-spindle 5 O.D. bites can be mounted 3 cross rotary tools can be mounted 3 sub-side end face drilling 10 square turrets (combined) Left-feed chip conveyor Automatic fire extinguishing ...
Tatebayashi, Japan
2010 CITIZEN A20ⅦCL
- Manufacturer: Citizen
- Model: A20
FANUC Guide bushless 5 O.D. bites can be mounted 4 cross rotary tools can be mounted 4 end face drilling in main direction 4 end face drilling in sub direction Parts catcher included Left handing workpiece remova...
Tatebayashi, Japan
2000 Nakamura-Tome Precision Industry TW-10MM
- Manufacturer: Nakamura
- Model: TW-10MM
FANUC18i-T (with interactive function) Main side 6-inch 3-jaw hollow chuck (Kitagawa/B-206) Sub side collet chuck (Riken/SAD-40) Left 12-corner turret with composite Y axis Right 12-corner turret with composite 6...
Tatebayashi, Japan
2004 CITIZEN C16-VII
- Manufacturer: Citizen
- Model: C16
MELDUS Rotary guide bush Sub spindle 5 OD turning tools can be mounted 4 cross rotary tools can be mounted 6 end face drilling holes (common 2-axis specification for main and saph) Equipped with parts catcher Equ...
Tatebayashi, Japan
2016 Nomura NN-32YB2
- Manufacturer: Nomura
MELDAS Rotary guide bush 5 OD turning tools can be mounted 6 cross turning tools can be mounted (3 turning tools) 4 end face drilling common to main and sub main 4 end face drilling with parts catcher Workpiece c...
Tatebayashi, Japan
2004 Tsugami BN20
- Manufacturer: Tsugami
- Model: BN20
FANUC-18i-TB Sub-spindle with parts catcher With workpiece discharge conveyor With right-feed chip-con With auto bar 3m specification If there is any discrepancy between the contents and the actual product, the a...
Tatebayashi, Japan
Mori Seiki NL-2500Y/700 CNC Lathe
- Manufacturer: Mori Seiki
- Model: NL-2500Y/700
Good condition Mori Seiki NL-2500Y/700 CNC Lathes available between 2006 and 2012 years. Located in Italy and other countries. Click request price for more information.
Italy
