Used controller in Riga, Latvia

CHC Navigation TG63

"CHC Navigation TG63" is an operator-friendly 2D/3D grader automatic control system. The system is designed to: facilitate the operator's work, reduce fatigue, labor costs and at the same time ensure maximum accu...

Electronic track set "Nordsten"

• Manufacturer: Nordsten

Electronic tramline set. We currently have 1 set. Fully tested and working. Not used in Lithuania. Not used in Lithuania. If you are interested, call +370 656 17815.

JFC Evolution S2

JFC Evolution S2 is designed for automatic, controlled calf feeding. The device mixes powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives exactly the amount of feed ass...

JFC Evolution S4

JFC Evolution is designed for automatic, controlled calf feeding. The device mixes the powder with heated water (from +5°C to +30°C) according to a set rate, and each animal receives the exact amount of feed assi...

CHC Navigation TX63

CHC Navigation TX63 is an operator-friendly 2D/3D indication control system for excavators. The system is designed to: facilitate the excavator's work, reduce fatigue, labor costs and at the same time ensure maxi...

CHC Navigation EasyNAV

Possibility to design: trench, plane, slope with an excavator system or with a GNSS receiver. The price includes installation and calibration work. A 2-year warranty is provided. Prices may vary slightly due to c...

CHC Navigation TX73

If the system does not have a planning bucket, 4 sensors out of 5 possible are installed. A .dxf file is readable only if it contains a "3D Face" element. If it does not contain a "3D Face" element, the file must...

2018 John Deere 1170G

• Manufacturer: John Deere
• Model: 1170G

Engine hours: 9900 h | The head: H413 | Motors: John Deere PowerTech™ Plus 6068, EPA Final Tier 4/EU Stage V, 136 kW (182 hp) | Boom length: 11m | Faucet: CH611 IBC | The front axle of the tire: 710x24,5 | Tread...

2018 John Deere 1170G 8WD

• Manufacturer: John Deere
• Model: 1170G

Engine hours: 17620 h | The head: H423 (1000h) | The price: 160000 € | Motors: John Deere PowerTech™ Plus 6068, EPA Final Tier 4/EU Stage V, 136 kW (182 hp) | Boom length: 10 | Faucet: CH610 IBC | The front axle...

CHC Navigation NX612 Steer Ready

"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...

CHC Navigation NX612

"CHC NAV" automatic steering system - a market-leading system with extremely accurate RTK signals up to 2.5 cm, headland turning function and no additional license fees. This system saves farmers' working time, f...

2013 Ponsse Ergo

• Manufacturer: Ponsse
• Model: Ergo

Engine hours: 16900 h | Curb weight: 20000 kg | The head: Ponsse H6 | The price: 58000 € | Motors: Mercedes-Benz 6-cylinder diesel engine MB 906, 210kw | Boom length: 10m | Faucet: C44 | The front axle of the ti...

2018 Komatsu 931XC

• Manufacturer: Komatsu
• Model: 931

Engine hours: 14200 h | The head: C144 (2023year/5000h) | Motors: AGCO POWER, 6-cylinder, Stage V, Tier 4F and Stage II: 190 kW | Boom length: 11m | Faucet: 230H | The front axle of the tire: 710x26,5 | Tread ba...

2021 John Deere 1170G 8WD

• Manufacturer: John Deere
• Model: 1170G

Engine hours: 9280 h | Curb weight: 20500 kg | The head: Waratah H424 | Motors: John Deere PowerTech™ Plus 6068, 155kW, Stage V. | Faucet: CH6 | The front axle of the tire: 710x24,5 | Tread balance pr. ass: 80% ...

2018 Komatsu 901

• Manufacturer: Komatsu
• Model: 901

Engine hours: 16500 h | The head: C93 | Motors: AGCO POWER, 6-cylinder diesel engine with turbo and intercooler. EU Stage V. 170kw. | Boom length: 11m | Faucet: 200H | The front axle of the tire: 710x24,5 | Trea...