Building Filters
USED FRONT FACED 2 SPINDLE LATHE DOOSAN
- Manufacturer: Doosan
- Model: PUMA QL200H
FRONT FACED 2 SPINDLE LATHE WITH GANTRY LOADER YEAR 2011, HAS 8 INCH ONE UNIT, 10 INCH ONE UNIT
Changwon-si, South Korea
2003 Doosan PUMA2000Y
- Manufacturer: Doosan
- Model: PUMA 2000Y
8 INCH CHUCK, FANUC 18i-TB SWING ON BED 600mm STROKE X250mm Z580mm y100(+-50)MM SPINDLE SPEED 4500rpm TURNMILL HOLER 5EA
Changwon-si, South Korea
CNC LATHE 12" DAEWOO
- Manufacturer: Daewoo
- Model: Puma 12
12" CNC LATHE, TAILSTOCK, CHIPCONVEYOR FANUC 0T
Changwon-si, South Korea
Changwon-si, South Korea
Changwon-si, South Korea
CNC LATHE WIA SKT100
- Manufacturer: Hyundai - Wia
- Model: SKT-100
WIA SKT100, YEAR 2007 6", TAILSTOCK, TOOLSETTER FANUC 0i
Changwon-si, South Korea
2006 UTIMAC SCN26HT CNC선반
Front/long slides (Z axis) Max number of front slides 6 Compound front slides Compound cross slides Feeding force of X - Z axis 4,850 / 4,000 Compound slides for part-cut tools Synchronized CNC pickup device Spee...
Gyeonggi-do, South Korea
1995 750x4000 DAINICHI MG75 CNC LATHE
- Manufacturer: Dainichi
Gyeonggi-do, South Korea
1972 1200x9900 DAINICHI H160X990 ROLL LATHE
- Manufacturer: Dainichi
1200x9900 DAINICHI H160X990 ROLL LATHE (1972) Chuck size: 1,200mm | Swing over bed: 1,600mm | Distance between centers: 9,900mm | Spindle speed: 160 rpm | Bad size: 1,010x11,050mm | Weight: 45t
Gyeonggi-do, South Korea
1973 1000X22000 FUJII FR-220 ROLL LATHE
1000X22000 FUJII FR-220 ROLL LATHE (1973) Chuck size: 1,000mm | Swing over bed: 2,000mm | Swing over table: 1,400mm | Distance between centers: 22,000mm | Spindle speed: 2~81 rpm | Bad size: 1,500x24,000mm | Weig...
Gyeonggi-do, South Korea
2010 2600x14000 HNK HCL4114 CNC Lathe
System : FANUC 31i-A Chuck Size : 2600mm Between Center : 14000mm Height Over Bed : 2100mm Max. Swing : 4100mm Claping Range : Ø650~Ø1950 Capacity : 160Ton Pin Turning Device 10ea
Gyeonggi-do, South Korea
2010 1750x10000 HNK HCL3510 CNC Lathe
FANUC 31i-A Pin Turning Device 10ea Chuck size: 1750 | Between center: 10000 | Height over bad: 1800 | Max.swing: 3500 | Claping range: Φ450~Φ1250 | Capacity: 700ton
Gyeonggi-do, South Korea
2004 10" OKUMA LB400M CNC LATHE Year
- Manufacturer: Okuma
- Model: LB400
2004 Year SPEC System: OSP-E100L | Chuck size: 10' | Max. workpiece dia: 620mm | Max. workpiece length: 1270mm | Spindle speed: 35~3500RPM | Turret: 12ea | Space (l/w/h): 5330mm / 1900mm /2110mm | Mass of machin...
Gyeonggi-do, South Korea
2018 15inch Hyundai-WIA L400C CNC Lathe
- Manufacturer: Hyundai - Wia
- Model: L400
Gyeonggi-do, South Korea
1997 4200x10000 Hankook 선반
- Manufacturer: Hankook
Gyeonggi-do, South Korea