Used controller in Switzerland

2003 DMG DMU 50 Ref No: 53750

• Manufacturer: DMG Mori
• Model: DMU 50

4726 spindle hours, 10,000 operating hours Object: 53750 | Controls: HEIDENHAIN | Number of processing axes (excl parallel axes): 3 | X-axis travel: 500 mm | Y-axis travel: 400 mm | Z-axis travel: 400 mm | Tab...

MYL RPH 250

• Manufacturer: MYL

Control: SIEMENS SINUMERIK 805 (Hardware 80310, Software 4.1) | Max. work piece diameter: ca. 20 mm | Workpiece length max.: 100 mm | Grinding spindle: 0.5 kW | Voltage: 380 Volt | Machine's weight about: 1000 k...

Fanuc Robodrill a-D21MiA5 I Vertical Machining Center

• Manufacturer: Fanuc
• Model: Robodrill α-D21MiA5

We hereby offer this used Fanuc Robodrill a-D21MiA5 vertical machining center from 2014, located in Switzerland. Fitted with the advanced Fanuc 31i-B5 control unit, it offers seamless control and optimization for...

Mikron WF2 I Universal Milling Machine

• Manufacturer: Mikron
• Model: WF 2

We hereby offer this used Mikron WF2 universal milling machine, located in Switzerland. It features a Heidenhain TNC 114 control unit, providing precision and ease of use. The machine offers a working area of 635...

1999 SCHMID HSR500 Ref No: 47620

• Manufacturer: Schmid

Press is equipped with 4. force Straightener SCHMID Loop control GSW SCHWALBE new in 2016

BRIC Ocean gravity

• Manufacturer: Bric

Ecological fountain thanks to micro-organisms. Optimized cleaning: biological fountain heated to 38°C for high-performance cleaning by brush, spray or soak, without the use of solvents. Ultra-efficient and multi-...

Famup MCX 600 I Vertical Machining Center

• Manufacturer: Famup
• Model: MCX 600
• Spindle taper: SK 40

We hereby offer this used Famup MCX 600 vertical machining center from 1995, located in Switzerland. Outfitted with a Siemens Sinumerik control unit, it provides operators with reliable and user-friendly controls...

TECHNICA ZSM 5100

• Manufacturer: TECHNICA

Control: Technica Flat Panel Control | Min. work-piece diameter: 8 mm | Max. work piece diameter: 125 mm | Workpiece length min.: 50 mm | Workpiece length max.: 1090 mm | Table load max.: 120 kg | Angle of the c...

2017 MAZAK HQR-200 MSY (1300U) Ref No: 51678

• Manufacturer: Mazak
• Model: HQR-200MSY/1300U
• Spindle bore: 65 millimeter

Accessories - 1 set of tool holders - 1 pc. 3-jaw chuck Kitagawa BB08 for main spindle - 1 pc. collet chuck Hainbuch 52mm, axfix - 1 piece bar loader, Hydrafeed Multifeed MX-1B

Deckel Maho DMU 80T I Vertical Machining Center

• Manufacturer: Deckel / Maho
• Model: DMU 80 T
• Spindle taper: SK 40

We hereby offer this used Deckel Maho DMU 80T vertical machining center from 2001, located in Switzerland. This robust machinery boasts a substantial working area of 1250 x 700 mm, accompanied by a commanding 120...

2022 FANUC LR Mate 200 iD 14L

• Manufacturer: Fanuc
• Model: LR Mate 200iD/14L

This 6-axis FANUC LR Mate 200 iD 14L robot arm was manufactured in 2022. It features a lightweight controller at 40 kg, operates on 200-230 V~ AC, and is designed for single-phase power with a consumption of 1.2 ...

Press brake TENSOL 8 1,25 HY

Maximum sheet length 8000 mm - Maximum thickness 1.5 mm - 15 KW motor - Approx. 5100 Kg - Origin: Suisse / Switzerland - Loading fee : 500.0 € - Lieu : Route de la Plaine 45, 1580 Avenches - SUISSE

2000 DISKUS DDS 750 XR Ref No: 42392

• Manufacturer: Diskus
• Model: DDS 750

with inline measuring system DISKUS IONIC 17A Emulsion treatment system HÜTTNER F6-157, YOM 2006

2005 CHIRON MILL 2000 HIGH SPEED Ref No: 50115

• Manufacturer: Chiron
• Model: MILL 2000

including chip conveyor Duty cycle 53'700h Spindle hours 26'400h Tool holder 5 pieces The following auxilliaries can be bought seperately at additional cost: Röhm double clamps Torsion springs for tool holders ...

2001 WILLEMIN MACODEL W418

• Manufacturer: Willemin

Milling spindle Linear axes B rotary axis Tool changer Weight & dimensions