Used controller in Switzerland

2001 SCHAUBLIN 125 CCN-R

• Manufacturer: Schaublin
• Model: 125CCN

Control manufacture: FANUC | Control manufacture model: 18i | Turning diameter: 270 mm | Center height: 125 mm | Distance between centres: 600 mm | Turning length: 400 mm | Turning diameter over cross slide: 11...

2016 DMG MORI NZX 1500/800SY

• Manufacturer: DMG Mori
• Model: NZX 1500-800 SY

Control: FANUC 31iB | Number of turning spindles: 2 | Number of revolvers: 2 | Swing diameter over bed: 800 mm | Max. turning diameter: 320 mm | Max. bar diameter: 52 mm | Longitudinal travel (z-axis): 810 mm | ...

SCHAUBLIN 125 CCN

• Manufacturer: Schaublin
• Model: 125CCN

Control: GE FANUC Series 20-T | Centre height: 125 mm | Distance between centres: 500 mm | Swing over cross-slide: 115 mm | Swing over bed: 270 mm | Spindle hole: 28 mm | Longitudinal travel (z-axis): 400 mm | T...

2001 VDF BOEHRINGER DUS 1000 ti

• Manufacturer: VDF - Boehringer
• Model: DUS1000TI

Control manufacture: Siemens | Control manufacture model: 810 D | Turning diameter over bed: 1000 mm | Center height: 500 mm | Distance between centres: 2000 mm | Turning diameter over cross slide: 700 mm | Hol...

2001 TORNOS DECO 2000/13

• Manufacturer: Tornos
• Model: Deco 2000

Main spindle Counter-spindle Guide bush holder 1 Guide bush holder 2 End attachment Secondary operation Power supply Machine hours Rotating guide bush Parts catcher Ejection of workpiece Coolant tank

2002 GILDEMEISTER NEF 320

• Manufacturer: Gildemeister
• Model: NEF 320

Control manufacture: HEIDENHAIN | Control manufacture model: Manual Plus | Number of axes: 2 | Turning diameter over bed: 212 mm | Distance between centres: 750 mm | Turning diameter over cross slide: 150 mm | ...

GILDEMEISTER CTX 200

• Manufacturer: Gildemeister
• Model: CTX 200

Control: HEIDENHAIN ELTROPILOT | Centre height: 298 mm | Swing diameter: 440 mm | Swing over cross-slide: 210 mm | Spindle hole: 56 mm | Maximum turning length: 305 mm | Longitudinal travel (z-axis): 350 mm | Tr...

STAR SA-12

• Manufacturer: Star
• Model: SA-12

Control: FANUC Series 18i-T | Number of axis total: 4 | Number of spindles: 2 | Max. turning diameter: 16 mm | Max. drilling diameter: 7 mm | Max. threading diameter: 6 M | From: 500 t/min | Up to: 8000 t/min | ...

STAR SA-12

• Manufacturer: Star
• Model: SA-12

Control: FANUC Series 18i-T | Number of axis total: 4 | Number of spindles: 2 | Max. turning diameter: 16 mm | Max. drilling diameter: 7 mm | Max. threading diameter: 6 M | From: 500 t/min | Up to: 8000 t/min | ...

COLCHESTER COMBI 4000

• Manufacturer: Colchester
• Model: Combi 4000

Control: FANUC 210i-T | Distance between centres: 2000 mm | Turning diameter over cross-slide: 370 mm | Swing over bed: 554 mm | Spindle nose: D1-11 | Spindle hole: 104 mm | Maximum turning length: 2000 mm | Lon...

2002 STAR SV 32

• Manufacturer: Star
• Model: SV-32

Control: GE FANUC Series 16i-T | Max. turning diameter: 32 mm | Maximum turning length: 300 mm | Max. threading diameter: 12 M | Thread drill diameter: 12 M | Inner taper type: F37 | From: 280 t/min | Up to: 700...

2001 GILDEMEISTER CTX 400

• Manufacturer: Gildemeister
• Model: CTX 400

Control: HEIDENHAIN | Swing over bed: 500 mm | Maximum turning length: 640 mm | Turning diameter: 290 mm | Longitudinal travel (z-axis): 640 mm | Transversal strocke (x axis): 212 mm | Fixed tools turret: 12 | I...

MRV 100 - Multi-Range Vacuum Gauge

Measuring device for use in the rough, fine and high vacuum ranges Can only be used with sensor Digital measuring device, USB interface and analog voltage output Clear membrane keypad Two relays for programming s...

INDEX G 200

• Manufacturer: Index
• Model: G200

Control: SIEMENS SINUMERIK 840 C | Number of spindles: 2 | Number of revolvers: 2 | Spindle hole: 42 mm | Turning diameter: 200 mm | Turning length: 400 mm | Number of positions turret 1: 14 | Number of position...

2006 DOOSAN PUMA 2000 LSY

• Manufacturer: Doosan
• Model: PUMA 2000

Control: FANUC Series 18it-TB | Swing diameter over bed: 600 mm | Swing diameter over carriage: 550 mm | Max. turning diameter: 330 mm | Spindle hole: 86 mm | Bar diameter: 76 mm | Clamping chuck diameter: 255 m...