Building Filters
- Trusted Seller
2002 LORENZ
- Manufacturer: Lorenz
Inner coil diameter: 460 - 520 mm | Outer coil diameter: 1900 mm | Max. coil weight: 7500 kg | Band thickness max.: 620 mm | Number of rolls: 9 | Roll diameter: 50 mm | Max. bandwidth: 620 mm | From: 1 mm | Up t...
Brügg, Switzerland - Trusted Seller
Biel/Bienne, Switzerland - Trusted Seller
KOHLER 10.120 B
- Manufacturer: Kohler
Number of rolls: 19 | Roll diameter: 18 mm | From: mm | Up to: 2 mm | Voltage 50 hz 3x: 380 Volt | Driving motor (motor power): 1 kW | Length: 800 mm | Width: 700 mm | Height: 1400 mm
Brügg, Switzerland - Trusted Seller
1983 FEINTOOL GKP 160 Ref No: 46191
- Manufacturer: FEINTOOL
The press, including the straightening line, is still in operation and can be inspected under power The machine was mechanically overhauled in 2016 ( articulation). Since then, the machine has made 27,538,408 str...
Niederhelfenschwil, Switzerland - Trusted Seller
1991 FEINTOOL MFA 2500 Ref No: 40452
- Manufacturer: FEINTOOL
+ Control system completely renewed in 2015 Object: 40452 | Last overhaul: 2015 | Controls: BECKHOFF | Drive system: knuckle-joint | Feedstock transport direction: left to right | Total force (nominal): 250 to |...
Niederhelfenschwil, Switzerland - Trusted Seller
1987 PLATARG 912 Ref No: 46450
- Manufacturer: PLATARG
The press is now in storage - was in a full running state when taken out of service. High lift stroke cams 159 mm - max. shell height 76 mm 13 Stations, 12 Rams + 1 Slave Wedge Adjustable Rams with Standard Male ...
Niederhelfenschwil, Switzerland - Trusted Seller
2003 FEINTOOL MFA 1600 Ref No: 42972
- Manufacturer: FEINTOOL
!! very well maintained machine !!! 2016 Overhaul by Feintool: + knuckle joint replaced + ram guides and roller shoe replaced + new base and table plate + new v-ring, counterholder and touch table piston + new ba...
Niederhelfenschwil, Switzerland - Trusted Seller
1975 FEINTOOL GKP 320/200 Ref No: 42805
- Manufacturer: FEINTOOL
new PLC OMRON in 1980 new servo feeder in 2012 new cam controller in 2018 Can be inspected in function
Niederhelfenschwil, Switzerland - Trusted Seller
1976 FEINTOOL HFA 6300 Ref No: 32866
- Manufacturer: FEINTOOL
+ press rebuilt in 2011 with new hydraulics and new electrics + roller feeders with manual height adjustment + press frame reinforced with 4 tie rods complete line currently dismantled and lying on stocks
Niederhelfenschwil, Switzerland - Trusted Seller
2007 SCHMID HSR400 Ref No: 51084
- Manufacturer: Schmid
- Model: HSR400
including coil line SARONNI with direct feed - hydraulic opening for cleaning - band guides at outlet - proportional pressure reducer for drive rollers
Niederhelfenschwil, Switzerland - Trusted Seller
2002 FEINTOOL HFA 8800 PLUS Ref No: 36813
- Manufacturer: FEINTOOL
Hours of operation beginning 2026: 80.465 h Object: 36813 | Total force (nominal): 880 to | Stroke: 40 mm | Cutting velocity min.: 5 mm/s | Cutting velocity max.: 70 mm/s | Closing velocity: 200 mm/s | Retur...
Niederhelfenschwil, Switzerland - Trusted Seller
2000 DELTECO PE-63 Ref No: 55885
- Manufacturer: DELTECO
Object: 55885 | Drive system: eccentric / crank | Table cushion: yes | Total force (nominal): 63 to | Nominal work capacity: 630 kNm | Table surface (left-right): 450 mm | Table surface (front-back): 310 mm ...
Niederhelfenschwil, Switzerland - Trusted Seller
1999 DELTECO PE-100 Ref No: 55884
- Manufacturer: DELTECO
Object: 55884 | Drive system: eccentric / crank | Table cushion: yes | Total force (nominal): 100 to | Nominal work capacity: 1000 kNm | Table surface (left-right): 640 mm | Table surface (front-back): 420 m...
Niederhelfenschwil, Switzerland - Trusted Seller
2005 SANGIACOMO T 130R CE Ref No: 55882
- Manufacturer: San Giacomo
- Model: T130R
- Stroke length: 200 mm
- Shut height: 360 mm
Object: 55882 | Drive system: eccentric / crank | Table cushion: no | Total force (nominal): 130 to | Nominal work capacity: 1300 kNm | Table surface (left-right): 740 mm | Table surface (front-back): 540 mm...
Niederhelfenschwil, Switzerland - Trusted Seller
1990 LAUFFER EPT 100 Ref No: 49540
- Manufacturer: LAUFFER
Equipment: - Cutting impact dampening - Hydraulic die cushion and ejector - CNC - gripper feed (200x900x1700) - Soprem belt system (optional) see article no. 3-49541
Niederhelfenschwil, Switzerland