Used dia in Belgium

Hardnesstester WOLPERT DIA TESTOR 2RC

Type : DIA TESTOR 2RC, serial no. : 3354 In good conditions With a lot of special accessories weight +- 200 kg

Behringer dia 300 mm

• Manufacturer: Behringer

Type: HBP303N Dia 300 mm Depth of throat: 300 mm | Max height of workpiece: 300 mm | Sawspeed: 19 > 130 m/min | Length of band saw: 4640 x 41 x 1,3 mm | Power needed: 7,5 kW | Length: 2350 mm | Depth: 1100 mm | H...

Hardness tester WOLPERT ISSERSTEDT DIA 3b

Com N° 374 Dimensions: width 900 mm, depth 1200 mm, height (with pallet) 1800 mm With ground glass screen and ruler Ball Ø 10 mm With engine and base

Hardness tester WOLPERT, type Dia-Testor 2RC

Mounted on table Dimensions with table: width 800mm, depth 750mm, height 1800mm Dimensions without table: width 400mm, depth 620mm, height 950mm Pressure from 1 kg up to 250 kg Usable for VICKERS, BRINELL and ROC...

Turntable dia 4200 mm x 80 ton

• Manufacturer: Turntable

hydrostatische belasting nieuwe frequentieregeling, 2 snelheden: - eerste snelheid: indexering - tweede snelheid: draaien max gewicht op tafel: 80 ton diameter van de tafel: 4200 mm transportafmetingen: 4200 x 42...

Bigwood Tube/Bar straightening dia 76 x 5 mm

• Manufacturer: Bigwood Tube/Bar straightening

Type: Bigwood 1B - Hoge snelheid buis- en staafrichter Met hoekverstelbare aandrijfrollen, voorzien van 3/5 verstelbare meelooprollen naar behoefte Capaciteit is voor het staal! maximale staafdiameter: 50 mm...

ZM Tube reducer

• Manufacturer: ZM

Full automatic Hydraulic Tube reducer + Automatic feeding max lenght: 750 mm

OMP Ipematic 425 S

• Manufacturer: OMP Ipematic

semi-automatic with hydraulic clamping same as Kaltenbach type KKS

CR Electronic Square air ducts production line

• Manufacturer: CR Electronic

STRADA is een systeem voor de geautomatiseerde productie van complete rechthoekige airconditioningkanalen. Het systeem maakt het mogelijk om complete, kwalitatief hoogwaardige kanalen snel en efficiënt te vervaar...

Bema C4C CNC PO

• Manufacturer: Bema

hydraulic tube clamping CNC control with 39 programs, each possible with 9 angle programmations retraction of mandrel mechanical stops for length determination

Saf turning gear 40 ton

• Manufacturer: Saf turning gear

1 driven unit 3 non-driven units load capacity driven unit: 10 ton load capacity non-driven unit: 10 ton rubber wheels

ZM Turning gear 60 ton

• Manufacturer: ZM Turning gear

1 driven unit + 1 non-driven unit rubber wheels Dia x width wheels: dia 500 x 200 mm | Min - max distance between wheels: 500 - 2000 mm

CC Brugeoise Ø 450 x 2000mm

• Manufacturer: CC Brugeoise

Capacity: Ø 450 x 2000 mm Center distance: 2000 mm | Max dia of the workpiece: 450 mm | Dia grinding wheel: 508 mm | Weight: 6 ton

Esab-Pema welding rotator 450 ton

• Manufacturer: Esab

self aligning set of welding rotators one driven unit one non-driven unit max load capacity: 300 ton max rolling capacity: 450 ton speed range: 60 1200 mm/min min diameter of workpiece: 1000 mm max diameter of w...

Lambert Jouty Turning gear Ø 1000 mm

• Manufacturer: Lambert

One unit, non-driven type: M-F9V centerheight: 840 mm dia chuck: 535 mm