Used drill machine

JET JDP-20MF Step Pulley Drill Press, 20" Swing, Serial 22021577

JET JDP-20MF Step Pulley Drill Press, 20" gap, 1.5 HP motor, speed range of 150-4200 RPM, 3/4" chuck size, table size of 18-1/2 x 16 inches, spindle travel of 4-3/4 inches, dimensions of 66 x 20 x 30 inches, weig...

Knuth Single Spindle Drill SSB 50 F Super VT

• Manufacturer: Knuth Werkzeugmaschinen
• Model: SSB50F
• Throat depth: 355.6 mm
• Drilling diameter: 50.04 mm

Equipped with: 8” touchscreen control panel Coolant system Tapping unit Operating tools Protective shield Manual LED work lamp Thread cutting feature Table height adjustment Electronic depth stop 4 automati...

Knuth 26" Box Column Drill Press KSB50C

• Manufacturer: Knuth Werkzeugmaschinen
• Model: KSB50C
• Throat depth: 330.2 mm

Equipped with: Coolants Power downfeed Adjustable table Adjustable head **Machine in like new condition!**

Delta 17-959L Laser Drill Press 17" Single Phase 120V 3/4Hp 250-2720RPM

• Manufacturer: Delta
• Model: 17-959L

Used, in Good Working Condition. Tested. This unit has adjustable belt speed. 215-2750 output RPM Top belt tensioner is not true. Bent but works. Not sure is it would go away if set at a different speed. 8.5" thr...

DAITO “Carbide” High Speed Drill Model CUD3C1050 40" Capacity

• Manufacturer: Daito

DAITO “Carbide” High Speed Drill Model CUD3C1050 40" Capacity The CUD3C1050 CNC Drill is the first machine of its kind to use carbide-drilling technology. Because of the fragile nature of carbide drill bits, they...

15" Delta Rockwell 15-650 Floor Type Drill Press

• Manufacturer: Rockwell

15" Delta Rockwell 15-650 Floor Type Drill Press, 1/2HP, 1/60, w/ 10" x 10" Table, S/N: 1377784

Solberga Geared Head Single Spindle Drill SEnr11

• Manufacturer: Solberga
• Model: SENR

Equipped with: Manual downfeed Spindle speeds: 120-1548 (8 steps) | Table size: 14.5" x 18" | Quill travel: 5" | Quill taper: 3MT | Column diameter: 4"

DAITO High Speed Drill for Structural Steel Model SDNFC 050 40" X 20" Capacity, 3 Spindles

• Manufacturer: Daito

DAIT0 High Speed Drill for Structural Steel Model SDNFC 1050 40" X 20" Capacity, 3 Spindles DAITO'S DNF and SDNF Model 3 spindle drilling machines, drill and/or mark I beams from three different sirections simult...

Enco 128-4010 Radial Arm Drill Press 32" x 10" 220V 2.2kw 3Ph 80-2000RPM

• Manufacturer: Enco
• Model: 128-4010

Used, in Good Working Condition, Tested OK. Has a 18x16" riser table. T slot type. 24x36" bed. 32" spindle head travel. Morse Taper #4 22" Height adjust of the arm on the column. Spindle stroke 10". 80-2000 rpm. ...

2024 Solberga/Willis geared head Drill press

• Manufacturer: Solberga
• Model: SE

Direct gear drive with fiber to steel mesh helical drive gears providing smooth, quiet operations, 20" Throat, 25mm 1" capacity, with Power feed option Two speed, 1.5 HP motor and electrics, Table with raising m...

15" Walker Turner / Delta 65-000 Bench Type Drill Press

• Manufacturer: Walker Turner

15" Walker Turner / Delta 65-000 Bench Type Drill Press, w/ Vari-Speed, 300-4700 RPM, 10" x 10" Table, Single Phase, S/N: 1349078

1980 Drill Press Drill Press- Stock #: 1236

Heavy Duty Drill Press with drill bits and very well taken care, been stored for the last few years, working condtion.

Walker Turner Drill Press Ettco Tapping Head 1/4" Steel Capacity 230/460V 3Ph

• Manufacturer: Walker Turner

Used, in Good Working Condition. Tested. No 6 to 1/4" taps in steel. Mounting base is 26x24" Has oil pan drain. Wired for 230V 3Ph 3" stroke. If this item ships as Flat Rate Freight please see details in Shipping...