Used ec

2025 VOLVO EC750E HR

• Manufacturer: Volvo
• Hours: 115 h

Base Machine, 533hp Volvo D16J Stage V Engine, 30° Tilting Cab With Heat & A/C, Falling Object Guard (FOG) And Side Impact Protection (SIPS), Two-Pin Hydraulic Lock, Joystick Controls, Dust Suppression System And...

2007 HAAS EC-1600

• Manufacturer: Haas
• Model: EC-1600
• Power requirement: 42 kW

Used 2007 HAAS EC-1600 Horizontal Machining Center features a 64" x 36" table, 30 hp spindle with 6000 rpm max speed, Haas CNC control, dual drive, a full 4th axis rotary table, and a 30+1 tool changer. Full 4th ...

barmag electronic EC 25a PLC Circuit Board Module EC25a EC 25 a EC25 25a 5760/2 (PM2781-33)

barmag electronic MPN: EC 25a - EC25a USED 30 day warranty on all purchases. Your purchase will include what is pictured and described above ONLY.

2009 HAAS EC-630

• Manufacturer: Haas
• Model: EC-630

Used Horizontal Machining Center. Features a 30 hp power, 6,000 RPM, 50 ATC, and advanced WIPS Probing. Includes Hennig chip conveyor, mist collector, and five pallets. WIPS Probing (Renishaw OTS/OMP-40) 10k RPM ...

2011 HAAS EC-400

• Manufacturer: Haas
• Model: EC-400
• Spindle taper: CAT 40

Used Horizontal Machining Center, featuring 4-axis capability, twin 15.75" pallets, 20" travel on all axes, 8100 RPM spindle, 24-tool ATC, and enhanced CNC controls with through-spindle coolant. Approx. 140"x97" ...

100 Cu Ft Burton Mixer, Model EC30-30, C/S

• Manufacturer: Burton

100 Cu Ft Burton Mixer, Model EC30-30, C/S Used 100 cu ft Burton Mixer, model EC30-30, carbon steel construction, approximately 72" diameter x 60" long drum, on stand with 5 hp drum drive, 5 hp feed/discharge auger.

2004 HAAS EC-1600

• Manufacturer: Haas
• Model: EC-1600
• Power requirement: 42 kW

Horizontal Machining Center, powered by 30 hp and 6,000 RPM, featuring probing and remote jog. 64" X, 50" Y, 32" Z travel with 36" Pallet-W. Includes through tool coolant and Quick code programming. 30 ATC, 3-axi...

2015 HAAS EC-400

• Manufacturer: Haas
• Model: EC-400
• Spindle taper: CAT 40

Used Horizontal Machining Center: 20" travel in X, Y, Z axes, 8,000 RPM, 20 hp, 40 tool ATC, full contour B-axis, dual 15.75" pallets, Haas CNC control, programmable coolant, and chip conveyor. Haas CNC Control, ...

2005 HAAS EC-400

• Manufacturer: Haas
• Model: EC-400
• Spindle taper: CAT 40

Used Horizontal Machining Center, fully equipped with a 4th axis, 12,000 RPM spindle, 40-position tool changer, and programmable coolant. Includes Renishaw probing, rigid tapping, chip conveyor. Ideal for aluminu...

2009 HAAS EC-300

• Manufacturer: Haas
• Model: EC-300
• Spindle taper: CAT 40

Horizontal Machining Center, featuring a 20" x-axis, 18" y-axis, 14" z-axis travel, CAT-40 spindle up to 12,000 RPM, and 24-tool changer. Includes Haas CNC control with USB, pallet changer, and chip conveyor. Wir...

2005 HAAS EC-3000

• Manufacturer: Haas
• Model: EC-3000

Horizontal Machining Center, used. Features: 120"x28" table, 10,000 lbs load, 120"x40"x32" travel, spindle speeds up to 6000 RPM, Haas CNC control, 30-position automatic tool changer, 30 HP motor. Table Dimension...

2007 HAAS EC-1600

• Manufacturer: Haas
• Model: EC-1600
• Power requirement: 42 kW

Horizontal Machining Center, used but capable. Key specs: X: 64.0, Y: 50.0, Z: 32.0, Power: 30, RPM: 7500, ATC: 30, Taper: CAT/BT 50, Pallet-W: 36, Axis: 3. Table Load Capacity, Maximum 10000 LBS Tool Diameter F...

BANNER ENGINEERING EC8-6M

• Manufacturer: Banner

New 30 day warranty Wr34 Bin2 Mpn: EC8-6M

Omron H7EC-BV Counter

• Manufacturer: Omron

New 30 day warranty Wr14 Bin3 Mpn: H7EC-BV