Building Filters
2019 Makino U3 Wire EDM
- Manufacturer: Makino
- Model: U3
0.05 Micron Scale Feedback (X,Y), Automatic Wire Threading Unit, Dielectric Fluid Height Setting Function, PICO Precision Guide System The 2019 Makino U3 Wire EDM is designed for manufacturers who value precision...
Schaumburg, IL
2017 MITSUBISHI EDM EA28V ADVANCE
- Manufacturer: Mitsubishi
- Model: EA28V ADVANCE
X: 25.6 in | Y: 17.7 in | Z: 13.8 in | Table size-w: 23.6 in | Table size-l: 33.4 in | Worktank inside dimensions: 43.3 x 31.9 x 17.7" | Max. workpiece dimensions: 41.3 x 29.9 13.8" | Max. workpiece weight: 4400...
Oak Park, IL
1991 MITSUBISHI EDM DWC-110C2
- Manufacturer: Mitsubishi
- Model: DWC-110
X: 12.0 in | Y: 18.0 in | Z: 10.0 in | Max. workpiece dimensions: 18 x 24 x 10" | Max. workpiece weight: 1102 Lbs. | Auto threading (yes/no): No | Taper angle: 12.0 | Taper height: 2.36 | Control type: Mitsubish...
Oak Park, IL
2019 MITSUBISHI EDM MV2400-ST ADVANCE M800
- Manufacturer: Mitsubishi
- Model: MV2400ST
Tooling shown on table not included. X: 23.6 in | Y: 15.7 in | Z: 16.5 in | Max. workpiece dimensions: 41.3 x 32.3 x 16.5" | Max. workpiece weight: 3307 Lbs. | Auto threading (yes/no): Yes | Submerged (yes/no): Y...
Oak Park, ILCharmilles 852 447 I Roboform 40 EDM Machine Circuit Board 811072 C
- Manufacturer: Agie - Charmilles
“Used item as seen in the images. 30 day warranty included.” Charmilles 852 447 I Roboform 40 EDM Machine Circuit Board 811072 C 6-NN2A-74368-CS
$522 USDBaroda, MI- Trusted Seller
Basler Electric EDM-200 Exciter Diode Monitor Module Relay EDM200 9177201001 (DW8076-4)
- Manufacturer: Basler
Basler Electric MPN: EDM-200 USED Exciter Diode Monitor Relay Module Approximate Dimensions: 5" x 4" x 7" 30 day warranty on all purchases. Your purchase will include what is pictured and described above ONLY.
$1,171 USDChattanooga, TN - Trusted Seller
EASCO SPARCATRON DM-323
- Manufacturer: EASCO SPARCATRON
12" X 19 1/2" TABLE 18" X 30" X 12" WORK TANK 8" IN Y AXIS 8" IN Z AXIS FIRE EXTINGQUISHER FUTABA PULSCALE 3 AXIS DIGITAL READOUT SYSTEM EDM ROTOBORE SPINDLE MODEL #RBH-1C
Cleveland, OH - Trusted Seller
Mitsubishi EDM Water Coolant Reservoir Filter Chiller Pumps Radiator 220V 3Ph
- Manufacturer: Mitsubishi
Used, in Good Working Condition. Removed From a Working Environment. We did not test this unit. This looks to be for a EDM. Water filter and chilling. Uses Mitsubishi Filter A150 for WEDM. Motors are all 220V 3Ph...
$1,062 USDMillersburg, IN - Trusted Seller
Como Filtration 210 Portable Filter Cart Hydraulic 11GPM 120V 3/4 Hp EDM
- Manufacturer: Como Filtration
Used, in Good Working Condition, Tested OK. Specs show this if for an EDM. Designed for EDM fluids. Each tank is rated for 20 pounds of dirt and 1 gallon of water. 3/4Hp Leeson Motor. 120V single phase. 60 PSI 11...
$4,275 USDMillersburg, IN Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D
- Manufacturer: Agie - Charmilles
“Used item as seen in the images. 30 day warranty included.” Charmilles 811073 F Roboform 40 EDM Machine Power Supply Board PCB 852 449 D 7-ZZ6H-72209-CS
$576 USDBaroda, MI- Trusted Seller
1999 Charmilles Roboform
- Manufacturer: Agie - Charmilles
- Model: Roboform
Travels: X – Axis – 17.7″ Y – Axis – 12.6″ Z – Axis – 16.14″ Width – 119.68″ Height – 121.65″ Depth – 112.2″ Die Sinking EDM Technical Specifications
Elox 8-2012 Sinker EDM Machine
Specifications*: SPEC Below for Elox 8-2012DR, should be similar, buyer should verify before purchase EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open ...
Posen, IL- Trusted Seller
NEC EHV-163-238670 Power Supply Circuit Board Unit Makino EDM CNC
- Manufacturer: NEC
Used, In Working Condition. Removed From a Working Environment. *Dusty From Storage* One Ceramic Insulator Missing Between Shunt on Back End. If this item ships as Flat Rate Freight please see details in Shippin...
$840 USDMillersburg, IN - Trusted Seller
Mitsubishi EDM Water Coolant Reservoir Filter Chiller Pumps Radiator 220V 3Ph
- Manufacturer: Mitsubishi
Used, in Good Working Condition. Removed From a Working Environment. This unit has 2 pumps. 20m head pressure 20 L/m 220V 3Ph. TFP-33706-1 150m head pressure 15L/m 3.7kw 3480 Rpm SF-JF 220V The tank is 80 gallons...
$1,275 USDMillersburg, IN 
Elox 8-2012-DR Sinker EDM Machine
Specifications*: EXPECT FINISHES OF 125 Ra AND TOLERANCES OF +/-0.003″ 280 VOLT – 60 AMP Stroke – 8″ Plate Size – 9″ x 9″ Open Height – 9″ to 17″ Throat Clearance – 17.25″ Worktable Size – 20″ x 12″ Worktable Mov...
Posen, IL
Agie - Charmilles CUT AM500 EDM machine
- Manufacturer: Agie - Charmilles
- Model: CUT AM500
Good condition Agie - Charmilles CUT AM500 EDM machines manufactured in 2021. Located in USA and other countries. Click request price for more information.
USA
