• 2 Diameter Mm Axon Extruder #224192

    • Manufacturer: Cumberland

      60mm diameter axon carbon steel single screw extruder system, extruder is type pxr-60d, serial #91615, throughput of approximately 5 ton/hour, 60mm diameter x 1.8m long carbon steel screw, 5-electric heating zone...

      No price
      West Windsor Township, NJ, USA
    • 2 Diameter Mm Axon Extruder #224193

      • Manufacturer: Cumberland

        60mm diameter axon carbon steel single screw extruders system, extruder is type pxr-60d, serial #91617, throughput of approximately 5 ton/hour, 60mm diameter x 1.8m long carbon steel screw, 5-electric heating zon...

        No price
        West Windsor Township, NJ, USA
      • Demaco Pasta Press

        • Manufacturer: Demaco

          3000 to 4000 lb. capacity per hour equipped with a 7 1/2 hp motor 18" paddle augers with 2 stands constructed with stainless steel

          No price
          Ravenna, OH, USA
        • 4 IN. X 14 IN. EXTRUDER – S/S

              1 – used 4 in. stainless steel extruder. 14 in. barrel length. approx. 5 in. wide x 5 in. long feed section with stainless steel hopper. 7 in. long jacketed barrel section. 4 hp drive. mounted on base. f.o.b. – c...

              No price
              Twinsburg, OH, USA
            • APV Baker Perkins MP80 80 MM TWIN SCREW EXTRUDER MIXER

              • Manufacturer: APV

                1 – used apv twin screw extruder/mixer. model mp 80. with 80 mm screws. typical outputs: 1500-2900 (kg/h). 225 hp reliance 460 volt inverter duty motor. with control cabinet. f.o.b. – location

                No price
                Twinsburg, OH, USA
              • APV Baker Perkins Twin Screw Extruder 3650

                • Manufacturer: APV

                  one(1) used apv baker perkins twin screw extruder model mp80 80 mm screws, typical outputs of 1500-2900 kg per hour. equipped with a 225 hp electric motor, 460 voltage inverter duty. control cabinet is included. ...

                  No price
                  Painesville, OH, USA
                • Welding Engineers Inc D-2 3/4 10-EC

                  • Manufacturer: Welding Engineers Inc

                    welding engineers inc. twin screw direct extruder. model d-2 ¾ 10-ec. stainless steel contact surfaces. the extruder has non-intermeshing, counter-rotating, 2.75" diameter screws. one screw measures 10" long and ...

                    No price
                    Louisville, KY, USA
                  • NRM Pacemaker III

                    • Manufacturer: NRM

                      nrm pacemaker iii 4.5" extruder. serial # 18031. l/d is 34:1. the vented, electrically heated and water cooled barrel is 12' long with an 8" round feed throat. the screw is driven by a 200 hp, 500 vdc electri...

                      No price
                      Louisville, KY, USA
                    • 8″ NRM EXTRUDER GEARBOX 14936

                          nrm 8″ extruder gearbox, 11:1 gear ratio

                          No price
                          Elk Grove Village, IL, USA
                        • USED WELEX 4.5″ EXTRUDER / 15091

                              used 4.5″ welex extruder, 36:1 l/d, water cooled, vented at 112″ from feed section, eurotherm temperature controls, 6 barrel zones, 4 die zones, melt temp, pressure readout, amp meters per zone, 250 hp dc, direct...

                              No price
                              Elk Grove Village, IL, USA

                            Have 5 seconds to help us improve the results?

                            I'll do it
                            No thanks