Used flow in Latvia

FMC 370

XX100405 CNC Machining center with 4 controlled axes FOM INDUSTRIE FMC 370 Machine will be in stock in May 2025 Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool ...

FMC 470

XX100292 CNC Machining center with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HS...

Self cleaning filters Russel Finex

With a wide range of self cleaning industrial filters to suit your unique processing requirements, you can be rest assured that your liquid products will be free from contamination. All our industrial filters are...

FIRG-Q serie

• Manufacturer: ROSTA Engineering

Valving style: Flat Face not spill Interchange: ISO 16028 and NFPA T3.20.15 (HTMA) | Available sizes: from 1/4" to 2" | Flow rate: from 24 to 1000 L/Min | Operating pressure: from 300 to 200 bar | Material: High ...

FL serie

• Manufacturer: ROSTA Engineering

Flat face is easy to clean, reducing the inclusion of contamination inside the hydraulic circuit. Minimal fluid loss during disconnection, reducing fluid loss to the environment. Minimal air inclusion during conn...

AX serie

• Manufacturer: ROSTA Engineering

Valving style: Flat Face not spill | Interchange: ISO 16028 and NFPA T3.20.15 (HTMA) | Available sizes: from 1/4" to 1" | Flow rate: from 24 to 378 L/Min | Operating pressure: from 350 to 300 bar | Material: Sta...

FIRG serie

• Manufacturer: ROSTA Engineering

Valving style: Flat Face not spill | Interchange: ISO 16028 and NFPA T3.20.15 (HTMA) | Available sizes: from 1/4" to 2" | Flow rate: from 24 to 1000 L/Min | Operating pressure: from 300 to 200 bar | Material:...

A serie

• Manufacturer: ROSTA Engineering

Valving style: Flat Face not spill | Interchange: ISO 16028 and NFPA T3.20.15 (HTMA) | Available sizes: from 1/8" to 1-1/2" | Flow rate: from 6 to 750 L/Min | Operating pressure: from 420 to 270 bar | Material: ...

Avant 225

• Manufacturer: Avant
• Model: 225
• Horsepower: 25 hp
• Hours: 17 h

Operating start year: 2022 | Power type: Petrol | Hours: 17 h | Gross weight: 700 kg | Cabin type: Open cab | Engine output: 18.4 kW | Traction type: 4 WD | Max. payload: 350 kg | Hydraulic's output: 42 l/min | ...

ORС serie

• Manufacturer: ROSTA Engineering

Dirty water enters the inlet and travels to the concave surface of the perforated screen . The water then passes through the screen and exits the outlet . Unwanted particles accumulate on the surface of the scre...

DEUBLIN 2400 serie

• Manufacturer: DEUBLIN

Deublin series 2400 rotating union is an alternative for steel works operators to change-over to the new technology for continuous casting machines and to reduce machine downtime. Following are the operating data...

Modis

• Manufacturer: ROSTA Engineering

Modis is a highly dynamic, speed-proportional metering system for controlling the flow rate of single component adhesive applications in the automotive industry, as well as in the automotive supply industry. ...

Deublin serie

• Manufacturer: ROSTA Engineering

1005 Series “Closed Seal” Rotating Unions for Continuous Coolant Service Single passage for coolant or MQL Closed seals for transfer line and similar applications Full-flow design has no obstructions to trap swar...

Ceradis

• Manufacturer: Ceradis

Ceradis is used to handle low to high viscosity single component materials. They can be filled as well as abrasive. Just a suitable material supply and controller or metering computer are required. The mate...

OR serie

Automatic, self-cleaning, line pressure powered water filter. Available in sizes from 2" through 20", single units can handle flow rates up to 8,100 gpm. Units can be installed in parallel to handle larger flow r...