Used four in Germany

Four-jaw chuck from – Ø 190 mm 31982

• Manufacturer: Theodor Eberlei

four-jaw chuck, 4-jaw chuck Four jaw chuck: Chuck size Ø 190 mm | Passage: Ø 60 mm | Hole circle: Ø 170 mm | Mass: 9,3 | Internal storage: 3A10203

Four-jaw chuck from – Ø 200 mm 31046

four-jaw chuck, 4-jaw chuck Four jaw chuck: Chuck size Ø 200 mm | Passage: Ø 60 mm | Hole circle: Ø 175 mm | Mass: 13,8 | Internal storage: 3A20704

Four-jaw chuck from – Ø 310 mm 35281

four-jaw chuck, 4-jaw chuck Four jaw chuck: Chuck size Ø 310 mm | Passage: Ø 98 mm | Hole circle: Ø 290 mm | Back wide: 26 mm / interchangeable jaws not included | Dimension: Ø 310 x 90 mm | Mass: 24 | Dimensions...

Four-jaw chuck from – Ø 190 mm 36181

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Four jaw chuck: Chuck size Ø 190 mm | Passage: Ø 57 mm | Hole circle: Ø 170 mm | Change jaws: Width 20 mm not included, can be supplied at an additional cost | Di...

Four-jaw chuck from – Ø 190 mm 35346

four-jaw chuck, 4-jaw chuck Four jaw chuck: Chuck size Ø 190 mm | Passage: Ø 57 mm | Hole circle: Ø 170 mm / M10 | Back wide: 20 mm / interchangeable jaws not included | Dimension: Ø 190 x 70 mm | Mass: 8,5 | Dim...

Four-jaw chuck from Röhm - Ø 315 mm 27590

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 103 mm | Hole circle: Ø 195 mm | Mass: 56 | Internal storage: 3A21202

Four-jaw chuck from Röhm - Ø 315 mm 28068

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 315 mm | Passage: Ø 105 mm | Hole circle: Ø 235 mm / M20 | Admission: Short taper 11 | Mass: 56 | Internal storage: 3A21202

Four-jaw chuck from Roto Record - Ø 315 mm 27048

• Manufacturer: Roto Record

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Roto Record, four-jaw chuck Ø 315 mm | Passage: Ø 98 mm | Hole circle: Ø 290 mm | Mass: 30 | Internal storage: 3A21202

Four-jaw chuck from Röhm – Ø 160 mm 36431

• Manufacturer: Röhm

four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck Manufacturer: Röhm, four-jaw chuck Ø 160 mm | Passage: Ø 40 mm | Hole circle: Ø 62 mm | Admission: Short taper 5 / cone 79 – 82 mm | Accessories: incl. 2nd set of...

Precision four-jaw chuck from Röhm - diameter 260 mm 27989

• Manufacturer: Röhm

Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck

Precision four-jaw chuck from Klopfer – diameter 165 mm 35753

• Manufacturer: Klopfer

Precision four-jaw chuck, chuck, faceplate, 4-jaw chuck, four-jaw chuck

Interchangeable jaw four-jaw chuck from – width 32 mm 32430

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Dimension total:

Interchangeable jaw four-jaw chuck from – width 20 mm 32204

• Manufacturer: Theodor Eberlei

interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set

Interchangeable jaw four-jaw chuck from – width 22 mm 32085

interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set

Interchangeable jaws four-jaw chuck from – width 34 mm 36182

interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set