Used frames in Japan

Trusted Seller
NPK SRC25
- Manufacturer: Nippon Pneumatic Industry Co.
Hours: - | Specification: STEEL FRAME CUTTER for 0.7m3 310mm 80φ
Chiba, Japan
Dalton 1001
- Manufacturer: ダルトン
Screening frame diameter: φ1000, 1 stage, 2 types Motor 1.5kw cassette screen With casters There are dents on the frame and the discharge port.
Hiroshima, Japan
2006 Kohyei CB 100-1S
- Manufacturer: Kohyei
- The upper frame does not have a discharge outlet. *Overfills will accumulate inside. - Includes an ultrasonic transmitter and cable. (No receiver.) - No lid. - Part of the resin coating on the lower frame has w...
Hiroshima, Japan
Tokuju Kosakusho 1000φ
- Manufacturer: 徳寿工作所
Frame only No tray bowl, etc. *Please check compatibility with other companies' sieves. Measure the edge diameter of the frame and if it is close to the model you are considering, it may be compatible. *Compatibi...
Hiroshima, Japan
Trusted Seller
Takatori ATM-12000DRP
- Manufacturer: Takatori
This is a fully automatic system (8-inch/12-inch switchable) that peels off the protective tape on the wafer surface after the 8-inch and 12-inch wafers are mounted on the dicing frame.
Toda, Japan
Trusted Seller
DISCO DFD640
- Manufacturer: Disco
- Model: DFD640
Capable of dicing wafers up to 8 inches. This fully automatic dicing machine can automatically remove a frame with a maximum 8-inch wafer mounted from the cassette, transfer it to the chuck table for automatic al...
Toda, Japan
Trusted Seller
DISCO DFD641
- Manufacturer: Disco
- Model: DFD641
Capable of dicing wafers up to 8 inches. This fully automatic dicing machine can automatically remove a frame with a maximum 8-inch wafer mounted from the cassette, transfer it to the chuck table for automatic al...
Toda, Japan
MARUYAMA
- Manufacturer: Maruyama
Model : MS90DC, tank and frame (only) Last update: 2025/07/10 | No.: 611B1337
Tottori, Japan
Trusted Seller
DISCO DFD651
- Manufacturer: Disco
- Model: DFD651
Equipped with dual spindles for dicing of up to 8-inch wafers. This fully automatic dicing machine can automatically remove a frame with a maximum 8-inch wafer mounted from the cassette, transfer it to the chuck ...
Toda, Japan
Trusted Seller
DISCO DFD650
- Manufacturer: Disco
- Model: DFD650
Equipped with dual spindles for dicing of up to 8-inch wafers. This fully automatic dicing machine can automatically remove a frame with a maximum 8-inch wafer mounted from the cassette, transfer it to the chuck ...
Toda, Japan
Trusted Seller
DISCO DFD651
- Manufacturer: Disco
- Model: DFD651
Equipped with dual spindles for dicing of up to 8-inch wafers. This fully automatic dicing machine can automatically remove a frame with a maximum 8-inch wafer mounted from the cassette, transfer it to the chuck ...
Toda, Japan
［TOSHIBA] Geared motor No model
- Manufacturer: Toshiba
Reduction ratio 1/10 Frame model No. 80 Power: 0.75Kw4P200V | Material: SS | Quantity saved: 2
Hiroshima, Japan
Trusted Seller
2024 Morooka
- Manufacturer: Morooka
rubber shoe For MST650VDL Morooka genuine product Width 500mm pitch 100mm Number of frames: 74 Unused
Tokyo, Japan
Trusted Seller
2024 Morooka
- Manufacturer: Morooka
rubber shoe For MST650VDL Morooka genuine product Width 500mm pitch 100mm Number of frames: 74 Unused
Tokyo, Japan
Trusted Seller
2024 Morooka
- Manufacturer: Morooka
rubber shoe For MST650VDL Morooka genuine product Width 500mm pitch 100mm Number of frames: 74 Unused
Tokyo, Japan