Used frames in Norway

NOV - Varco Top Drive Transport Frame, NOV Varco

• Manufacturer: NOV

Varco Top Drive Transport Frame, load carrier, DNV 2.7.1, Certified for use offshore. in good condition.

2017 NOV CBC – 2x4 / TOS - 1 - Crown Block Cluster

• Manufacturer: NOV

Crown Block Cluster. 2 x 4 CBC Sheaves 3390 mm Ø, 1 x TOS 3416 mm Ø, for Dual Purpose 450 Te SWL Drawworks New/Unused. The TOS (Turn Over Sheave) is equipped with a shear-type load cell to measure the load on the...

2017 NOV ZBA - Pipe Racking Guide Arm

• Manufacturer: NOV

The Racking Guide Arm (Z-back Guide Arm or ZBA) is a derrick mounted guiding arm. The Racking Guide Arm operates together with Racking Lift Arm, guiding the lower end of the tubulars from the setback area and pre...

2017 NOV 347-BC100 - Catwalk Machine

• Manufacturer: NOV

Horizontal pipe and casing handling system, Tail in arm, handles tubulars up to 36" OD (flange), 16 m length and 9 Te weight.. New / Unused. The Catwalk Machine (CWM) consists of the following: - Support structur...

Deutz BA16M816U

• Manufacturer: Deutz
• Model: BA 16M 816

Deutz BA16M 816U generator set 1200 kWA The engine is Completely overhauled in 2007

Oceanographic research vessel

• Manufacturer: Unknown

Ex government Oceanographic research vessel Keen seller - offers wanted Oceanographic research vessel. Came out of local shipyard in May 2013 with fresh 5 year cert. Laid up in freshwater for a period. Certificat...

Oceanographic research vessel

Ex government Oceanographic research vessel Keen seller - offers wanted Oceanographic research vessel. Came out of local shipyard in May 2013 with fresh 5 year cert. Laid up in freshwater for a period. Certificat...

2003 Maritime Hydraulics Travelling Block. 350 ton

• Manufacturer: MHWirth
• Gross weight: 3,660 kg

Maritime Hydraulics Travelling Block. rated 350 ton, 5 sheaves x 42" diameter. 1-3/8" Wire line. In very good condition. Performance Data Fixation boltholes for travelling block/inline Materials Weight and Outlin...

2011 AMADA EMZ 3610 NT

• Manufacturer: Amada
• Model: EMZ-3610NT

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with reposit...

2014 Arnpro S/A

• Manufacturer: Arnpro

Other information 2014 Arnpro S/A Docking bay - 6x chairs - Table - Refrigerator - First aid kit - Toilet and washbasin - Sink with 25l water jug and foot pump - Mirror - 200W frost guard Arnpro S/A Construction ...

2013 Atlas Copco MAS 160-8.6 bar

• Manufacturer: Atlas-Copco
• Model: MAS 160

Atlas Copco MAS 160-8.6 bar Marine air compressor Atlas Copco MAS 160-8.6 bar Marine air compressor in fixed frame container wit wire lifting arrangement.

NOV Varco BX 2 500 ton Elevator

• Manufacturer: NOV

Elevator, 500 ton BX Frame 2, 9-5/8" to 14" Casing, Hydraulically operated. Refurbished and recertified by NOV April 2015. Not used after. Weight 770 kg

2017 NOV 12 Te SWL - Cursor Winch

• Manufacturer: NOV

Electric Single Layer Cursor Winch, NOV, 12 Te, Std. Line Speed 10 m/min - New / Unused The Cursor Winch is a dual unit with hydraulic motors on both ends of the drum. The drum has two wires that via sheaves at t...