• 1980 General Electric Gear Plant in Lynn, Massachusetts Special

    No price - Washington, PA, USA
    • Manufacturer: General electric
    • Weight: 105000 lbs 47727 kg

    table top can be positioned at any position or rotation on table base, exsiting fixture plate contains numerous tapped holes - mostly 1 inch thread diameter

  • 1991 Pfauter PE150 27304

    No price - Washington, PA, USA
    • Manufacturer: Pfauter
    • Model: PE150

    maximum center distance between hob and workpiece 6.30 in. (152.40 mm.), hob spindle taper iso 40, worktable diameter 6.30 in. (160 mm.), worktable bore diameter 2.48 in. (63 mm.)

  • Taylor-Hobson Talyrond 250

    No price - Washington, PA, USA
    • Manufacturer: Taylor

    includes table, motorised radial arm traverse length may be set for up to 1.97" (50.00 mm) of travel past the spindle axis

  • 1994 Taylor-Hobson Talysurf 120L

    No price - Washington, PA, USA
    • Manufacturer: Taylor

    serial: 469 | weight: 25.35 lbs 11.50 kg | gauge type: phase grating interferometer, 1 mn force nominal | resolution: 12.8 nm @ 10 mm range | machine width: 5.00 in 127.00 mm | condition_info: exc...

  • 2004 Mitsubishi FS30A 30026C5

    No price - Washington, PA, USA
    • Manufacturer: Mitsubishi

    synchronized shaving feature, gantry load and unload robot, coolant system with 5 hp, and 1 hp 50 gpm pumps,

  • Hofler EFR630

    No price - Washington, PA, USA
    • Manufacturer: Hofler

    module: 20 | serial: 020227 | condition_info: good | wheel diameter: 24.80 in 630 mm

  • CAMCORP 12490

    $62,500 - Williamsport, PA, USA
    • Manufacturer: CAMCORP

    used camcorp 40,000cfm dust collector. air to media ratio: 7.5 to 1. negative pressure tor list:main blower 125 hptransfer blower package: 7.5hp, 3/60/230-460vsweep arm drive motor: 1/2hp, 3/60/...

  • Vectrax (MSC) 8955 12344

    $6,600 - Williamsport, PA, USA
    • Manufacturer: Vectrax (MSC)

    used vectrax 13" metal lathe. mfr part # ra071 w/dromsc part # 95173506features and benefits•engine lathes are used for heavy-duty work and offer heavy casted machine bases with built-in coolant s...

  • REISHAUER AZO

    No price - Waukesha, WI, USA
    • Manufacturer: Reishauer
    • Model: AZO

    chiller change gears age: 1980 | gear face: 11.02" | grinding run: 7" (180mm) | max. diameter: 17.7" | number of teeth: 12 - 260 | propeller angle: 45 deg | weight of the machine: 12,320 lbs | max....

  • KAPP VAS57P

    No price - Waukesha, WI, USA
    • Manufacturer: KAPP

    725 gallon coolant system with nylon support mesh with paper filtration element and chiller machine rescrapped in 2015