Used headers in Denmark

2025 Ziegler rapeseed harvester, rapeseed header, rapeseed harvesting equipment

• Manufacturer: Ziegler

ZIEGLER 7500mm Raps table with 2 hydraulic side knives. It fits mixed on Claas c750 cutter bar, but can easily be made narrower if you have a narrower cutter bar. The cutter bar is manufactured in 2023 but has ne...

2025 Deutz-Fahr 7206 With 24feed - 7.2m header. New and unused Com

• Manufacturer: Deutz-Fahr

We sell new ones over stored Deutz-Fahr Deutz C 7206 TS is combined to most of the world, but they cannot be sold for use in EU markets Due to the Stage IIIA Euro norm on the engine, this combine does not have of...

2025 Ziegler rapeseed harvester, rapeseed header, rapeseed harvesting equipment

• Manufacturer: Ziegler

ZIEGLER 9000mm rape board with 2 hydraulic side knives. It fits mixed on Claas C900 cutting board, but can easily be narrowed if you have a narrower cutting board. The cutting board is manufactured in 2021 but ha...

2025 Ziegler rapeseed harvester, rapeseed header, rapeseed harvesting equipment

• Manufacturer: Ziegler

ZIEGLER 9150mm Rapeseed table with 2 hydraulic side knives. It fits on John Deere 630R cutter bar but can easily be made narrower if you have a narrower cutter bar. The cutter bar is manufactured in 2022 but has ...

2025 Ziegler rapeseed harvester, rapeseed header, rapeseed harvesting equipment

• Manufacturer: Ziegler

ZIEGLER 9150mm Rapeseed table with 2 hydraulic side knives. It fits on John Deere 630R cutter bar but can easily be made narrower if you have a narrower cutter bar. The cutter bar is manufactured in 2022 but has ...

2025 Deutz-Fahr C7206 With 24feed - 7.2m header. New and unused Co

• Manufacturer: Deutz-Fahr
• Tire size: 650/75R32

We sell new ones over stored Deutz-Fahr Deutz C7206TS is combined to most of the world, but they cannot be sold for use in EU markets Due to the Stage IIIA Euro norm on the engine, this combination does not have ...

2025 Deutz-Fahr C7206 With 24feed - 7.2m header. New and unused Co

• Manufacturer: Deutz-Fahr
• Tire size: 650/75R32

We sell new ones over stored Deutz-Fahr Deutz C7206TS is combined to most of the world, but they cannot be sold for use in EU markets Due to the Stage IIIA Euro norm on the engine, this combination does not have ...

2025 Deutz-Fahr C7206 With 24feed - 7.2m header. New and unused Co

• Manufacturer: Deutz-Fahr
• Tire size: 650/75R32

We sell new ones over stored Deutz-Fahr Deutz C7206TS is combined to most of the world, but they cannot be sold for use in EU markets Due to the Stage IIIA Euro norm on the engine, this combination does not have ...

2025 John Deere 9150mm table for John Deere 630R cutter bar. Rapeseed fo

• Manufacturer: John Deere
• Model: 630R
• Cutting width: 30.02 ft
• Auger Diameter: 25.98 in

ZIEGLER 9150mm Rapeseed table with 2 hydraulic side knives. It fits on John Deere 630R cutter bar but can easily be made narrower if you have a narrower cutter bar. The cutter bar is manufactured in 2022 but has ...

2025 John Deere 9150mm table for John Deere 630R cutter bar. Rapeseed fo

• Manufacturer: John Deere
• Model: 630R
• Cutting width: 30.02 ft
• Auger Diameter: 25.98 in

ZIEGLER 9150mm Rapeseed table with 2 hydraulic side knives. It fits on John Deere 630R cutter bar but can easily be made narrower if you have a narrower cutter bar. The cutter bar is manufactured in 2022 but has ...

HEADER

CUTTING TABLE for 8 plastic boxes, length 190cm, width 100cm, height 90cm with adjustable leg and can be adjusted where the cutting board lies. 8 pcs. in stock.

Case IH 8250 Axial-Flow with 35ft Varicut cutting header. Danish

• Manufacturer: Case IH
• Model: Axial-Flow 8250
• Horsepower: 480 hp
• Hours: 418 h

CaseIH 8250 Axial-Flow. It is Danish sold from new, and it just had a lot of equipment checked off when it was ordered. It has harvested 2 special zones. It has just arrived home, so if you want to know more, giv...

Combitool CSM – CBM

• Manufacturer: Combitool

Combitool Header Capper machine Combitool Header Capper machine for cosmetic tubes round or oval with a diameter from 13 to 56 mm and a length from 50 to 220 mm Tube Dimensions & Output:Diameter:13 – 56 mm (round...

Polytype CM130

• Manufacturer: Polytype

Polytype CM130 Header Capper The Polytype CM130 header capper for cosmetic tubes is suitable for diameters from 19 to 50 mm and lengths from 50 to 215 mm. Tube Dimensions & Output:Tube Diameter (Min): 19 mm Heade...

Combitool CSM 16/80

• Manufacturer: Combitool

Combitool CSM 16/80 header machine Combitool CSM 16/80 Header machine for cosmetic tubes round or oval with a diameter from 13 to 56 mm ( standard 16 to 50mm) and a length from 50 to 220 mm Technical supply speci...