Used ipg

ADFORM BLE PRO 1530

• Manufacturer: Adform

Used ADFORM BLE PRO Fiber Laser Cutting Table: This machine can cut sheets in formats of 1500 x 3000 mm, and offers the best and most economical solution in terms of cutting quality, precision, high speeds, low c...

DURMA HD-FO 3015 2 KW

• Manufacturer: Durma - Durmazlar

10 m/s² acceleration IPG 2000W YLU fiber laser source Estimated lifetime Diode> 100.000 hours Synchronized speed X and Y axes: 141 m/s Max. acceleration X and Y axes: 14 m/s2 Precitec head with manual focus adjus...

ADFORM BLM PRO

• Manufacturer: Adform

Order No. DMO : BLM PRO fiber laser cutting offers the user the best solution for cutting quality, precision, high cutting speed and low cost when cutting thin materials. These characteristics can be achieved at ...

AGIE EXCELLENCE 2

• Manufacturer: Agie - Charmilles
• Model: Excellence

Travels (x / y / z): 350 x 250 x 256 mm | Max. part size for clamping: 750 x 550 x 250 mm | Max. workpiece weight: 450 kg | Cone - process paths u/v: 30°, U=70mm, V=70mm | Wire threading: Automatic wire threadin...

GF AgieCharmilles CUT 3000

• Manufacturer: Agie - Charmilles
• Model: CUT 3000

Travels (x / y / z): 500 x 350 x 256 mm | Max. part size for clamping (x/y/z): 1050 x 650 x 250 mm | Max. workpiece weight (without bath): 400 kg (800 kg) | Worktable: 850 x 550 | Conic: 30° / 100 mm height | Tr...

GF AgieCharmilles CUT 2000X

• Manufacturer: Agie - Charmilles
• Model: CUT 2000

Travels (x / y / z): 350 x 250 x 256 mm | Max. part size for clamping (x/y/z): 750 x 550 x 250 mm | Max. workpiece weight (without bath): 200 kg (400 kg) | Worktable: 700 x 450 mm | Conic: 30° / 100 mm height | ...

GF AgieCharmilles CUT 2000X

• Manufacturer: Agie - Charmilles
• Model: CUT 2000

Travels (x / y / z): 350 x 250 x 256 mm | Max. part size for clamping (x/y/z): 750 x 550 x 250 mm | Max. workpiece weight (without bath): 200 kg (400 kg) | Worktable: 700 x 450 | Conic: 30° / 100 mm height | Tra...

2015 BYSTRONIC BY SPRINT FIBER 3015

• Manufacturer: Bystronic
• Model: BySprint Fiber 3015
• Cutting thickness: 25 mm

- USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER

ADSS Erbium Glass Laser

• Manufacturer: ADSS

Theory Emitting the 1550nm Erbium laser in factional way, and a noe-invasive,when it act on skin will not ablative but the energy can reach the deeper skin;with small energy,the skin tissue will rearrange and the...

PW E100

Operating pressure: 40-170 bar - 4-17 Mpa | Water flow rate: 450-600 l/h | Outlet water temperature: 70 °C | Supply: 3Ph - 400V - 50Hz - 25A | Absorbed power: 16,3 kW | Motor poles/rpm: 4-1400 rpm | Remote contr...

IWD E

Operating pressure: 40-170 bar - 4-17 Mpa | Water flow rate: 600 l/h | Inlet water temperature: 70 °C | Supply: 3Ph - 400V - 50Hz - 25A | Absorbed power: 16,4 kW | Motor poles/rpm: 4-1400 rpm | Remote control: D...

2018 PRIMA POWER PLATINO FIBER 1530

• Manufacturer: Prima Industrie
• Model: Platino 1530

- USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER

IPG Photonics Lasers YLR-400-WC Ytterbium Laser, 400W, 1600VA, (Aug. 2015)

• Manufacturer: IPG

“Used unit as seen in the images. This unit was functioning when it was put in a crate. It may just be outside fatory specs so it may require calibration/refurbishing. Buyer may inspect the item prior to purch...