Used knitting

68x Center Tuckers TLL 110- 120 D1 and D2

Number available: 68

Mid spacers TLL

Different versions: For TW11 /PU/ P7100/ P7200 105 and 110 degrees D1 and D2

Carding machine

HS30 Number available: 1

4x Center Tuckers for P7300 HP 25 mm (TLL Tucking Unit)

25 mm tuck in Technical fabric type temples (Boven druk breedhouders)

Ladder crane winder type DW3222 – ww 320cm

Neuenhauser ladder winder type DW3222, roll width 340 cm, max fabric width 320 cm,abric tension adjustment with POT meter, with change ring and loom bridge. Serial number 4KA093835, year of construction 5-2006.

3x Walk-on unwinder type DW 3222 L – ww 420 cm

3 Neuenhauser walk-on unwinder type DW 3222 L, ww 420 cm, built in 1998/1999, with changering, inspection loop with certificate and undertlight, and podium. The winders are very well maintained. Price per piece, ...

Staged roll winder – ww 4200 mm

Neuenhauser stacking winder crane, type DW 3018 R, Roll width 4200 mm, year of construction 1999,With POT meter for winding tension,Complete with weaving bridge.

5x Inserter devices (L and R)

the tucking units, (L + R) the mounting plates with drives for the tucking units. Set of side tuckers for Dornier rapier looms, L + R, oil bath type. Complete set: Alternative: Side tucker units L + R

3x Warp feed device off loom warp tensioning system

3 pcs warp feed device, off loom warp tensioning system, make Willi Grob / Crealet, type KAST /Digikast, year 2000-2003, colour green, Roller width ca.540 cm. This unit can work from bobbin creel and off loom beams.

10x air cushion feet

GERB anti vibration spring pads, round type, Ø 240 mm Vibration damper for machine type W2F-481-S-SP Nominal load 11.50 kN, Max. 21.10 kN 2 sets of 4 pcs Price for each set of 4 pcs: EURO. 500.00 GERB anti vibrat...

Neuenhauser - Riser Dock Winders – ww 450 cm

• Manufacturer: Neuenhauser

Neuenhauser DW 3222 L rising dock winder, 450 cm wide, built in 1998/1999, with a change ring, inspection loop with inspection area and underlight, and a platform. The winders are very well maintained.

2008 12x Sulzer - P7300 HP V8 B 390 N2 EP D12 R projectile looms

• Manufacturer: Sulzer
• Model: P7300

with cam motion 8-10 levers installed Reinforced 2 colours electronic warp let off weft tensioner normal breast roller (sand paper type) the looms are running with split beams 12pcs. Sulzer projectile looms P7300...

3x Sulzer - P7300HP P390 N2 EP D12 – POSILENO

• Manufacturer: Sulzer
• Model: P7300

3 pcs. Sulzer P7300HP P390 N2 EP D12 with eccentric, 6 cam drives installed, built in 2005, with separate electronic drawwork for weaving from creel, electronic cloth winding, with POSILENO (Groz-Beckert, 0.30 – ...

Fischer-Poege - Knotting frame

• Manufacturer: Fischer Poege

Fischer-Poege knotting frame for FA series, L = 180cm

8x Scholze and Temporiti - warp beams

Location: Enschede, The Netherlands beam Ø 215 mm, reinforced (EURO Kettbaum), Length 200 cm, galvanized, square take up 55 x 55 mm, with aluminum flanges, Ø 800 mm, Q3 The warp beams are in very good condition. ...