Used labour

Trusted Seller
3" x 1.5" x 8" Labour Centrifugal Pump, S/S, 25 HP
- Manufacturer: Labour
3" x 1.5" x 8" Labour Centrifugal Pump, S/S, 25 HP Used Labour Centrifugal Pump, 316 stainless steel construction, 3" x 1.5" x 8" impeller, rated 150 GPM @ 270' head, on base with 25 HP 230/460 volt drive, Serial...
Cleveland, OH
Trusted Seller
3" x 1.5" x 8" Labour Centrifugal Pump, S/S, 25 HP
- Manufacturer: Labour
3" x 1.5" x 8" Labour Centrifugal Pump, S/S, 25 HP Used Labour Centrifugal Pump, 316 stainless steel construction, 3" x 1.5" x 8" impeller, rated 150 GPM @ 270' head, on base with 25 HP 230/460 volt drive, Serial...
Cleveland, OH
Trusted Seller
1.5" x 1.5" x 6" Labour Centrifugal Pumps, Karbate (2)
- Manufacturer: Labour
1.5" x 1.5" x 6" Labour Centrifugal Pumps, Karbate (2) Two (2) used Labour Centrifugal Pumps, 1 1/2" x 1 1/2" x 6" diameter impeller, karbate construction, size 10, Type DZT, complete on base with 1.5 H.P. drives...
Cleveland, OH
Trusted Seller
2.5" x 2.5" x 8" Labour Centrifugal Pump, Karbate, 5 HP
- Manufacturer: Labour
2.5" x 2.5" x 8" Labour Centrifugal Pump, Karbate, 5 HP Used Labour Centrifugal Pump, 2 1/2" x 2 1/2" x 8" diameter impeller, karbate construction, size 15, Type DPL, complete on base with 5 H.P., 208-220/440 vol...
Cleveland, OH
Trusted Seller
Cast Iron Labour 23XW-MPL Centrifugal Pump - IPP# 207008
- Manufacturer: Labour
self priming centrifugal pump. 316SS impellor.
Princeton Junction, NJ
Labour AB8 LVA 1.5x3-8 ANSI Pump, 316SS/Ductile Iron, #94885
- Manufacturer: LABOUR
“New Surplus” Comments: W/ Baldor 3 phase, 2 HP, 1800 RPM motor Voltage: 208-230/460, Frame: 145T, Enclosure: TEFC Mounted on a channel steel base, 12"W x 39"L THIS ITEM CAN BE REMANUFACTURED FOR AN ADDITIONAL C...
$1,550 USD
Johnson City, TN
Trusted Seller
Hisco 966659712 - 101035774 Pump Suction Head DZT 316 Stainless Steel Labour
- Manufacturer: Hisco
“NEW WITHOUT BOX. IN GOOD CONDITION. SEE PICTURES ATTACHED” Hisco 966659712 - 101035774 Pump Suction Head DZT 316 Stainless Steel Labour Hisco 966659712 - 101035774 Pump Suction Head DZT 316 Stainless Steel Labou...
$1,500 USD
Fleetwood, PA
Labour A80-LV 4x6-13 ANSI Pump, 316SS, 859GPM @ 97TDH, #100437
- Manufacturer: LABOUR
“used *as-is*” Comments: W/ Siemens 40 HP 1800 RPM motor Voltage: 230/460, Frame: 324T, Enclosure: TEFC Mounted on a LaBour cast iron base, 17"W x 58"L Pump frame foot is broken. Motor has broken fan, missing fan...
$4,100 USD
Johnson City, TN
Labour A80-LV 4x6-13 ANSI Pump, 316SS, 859GPM @ 97TDH, #100436
- Manufacturer: LABOUR
“Used: As-is” Comments: W/ Siemens 40 HP 1800 RPM motor Voltage: 230/460, Frame: 324T, Enclosure: TEFC Mounted on a LaBour cast iron base, 17"W x 58"L THIS ITEM QUALIFIES FOR SAME DAY SHIPPING SUBJECT TO PRIOR SA...
$4,100 USD
Johnson City, TN
Labour A80-LV 4x6-13 ANSI Pump, 316SS, 600GPM @ 122TDH, #100438
- Manufacturer: LABOUR
“used *as-is*” Comments: W/ Siemens 40 HP 1800 RPM motor Voltage: 230/460, Frame: 324T, Enclosure: TEFC Mounted on a steel base, 20"W x 65"L Motor foot is broken. THIS ITEM CAN BE REMANUFACTURED FOR AN ADDITIONAL...
$4,100 USD
Johnson City, TN
Trusted Seller
Used Labour T-316 stainless steel centrifugal pump 5HP
- Manufacturer: Labour
Used Labour T-316 stainless steel centrifugal pump. Size 1.5 X 1. Alloy Y-17. Rated 10 GPM/50 ft. head @ 3500 RPM. S/N W-20388. Equipped with approximately 5HP electrical motor rated for hazardous locations. Moun...
Wilmington, NC
Trusted Seller
Labour Power End, Size 20W, Type 0 #25836
- Manufacturer: LABOUR
Power End, Size 20w, Type Q, Casting # 101-06 Material: IRON
Fitchburg, MA
Trusted Seller
Labour Tri Flo 3X2-83/8 Pump, 8" Diameter Impeller, Stainless Steel Casing #25831
- Manufacturer: Tri Flo
Labour Tri Flo Pump, 8" Diameter Impeller, Stainless Steel Casing, Stainless Steel Impeller, Stainless Steel Stuffing Box, Dura Seal, 200 Gal Min, 50 Ft Head, 750 Rpm, Labour Size L Power End On Cast Iron Base
Fitchburg, MA
LABOUR AALV
- Manufacturer: LABOUR
PUMP S/N W27125, 4-3/8" IMPELLER. Flow (gpm): 50 | Head (ft): 18 | Speed (rpm): 1800 | Driver type: MOTOR | Material: SS/316
Houston, TX
LABOUR DPL-20 90178
- Manufacturer: LABOUR
REFRIGERATION CONDENSATE PUMP; Qty: 1 | Alloy: C | Gpm: 60 | Ft head: 77 | Case material: CI | Impeller material: CI | V/h: H | Size: 3X2 | Driver type: MOTOR | Hp: 7.5 | Rpm: 1750 | Voltage: 460
Cleveland, TX