search
  • 1981 Voest-Alpine AG Linz Austria DA 180 -800 lathemachine VÖST

    $6,880 - Rotthalmünster, Germany
    • Manufacturer: Alpine
    • Spindle Bore: 52 mm
    • Distance between Centers: 800 mm

    lz lathe voest alpine da 180-800 . no ear built: 1981 center height: 180 mm distance between centers: 800 mm gr. turning diameter over bed: 380 mm gr. diameter above transversing slide: 200 mm spin...

  • 1973 VOEEST DA 360 lathe

    $9,737 - Leobersdorf, Austria
    • Manufacturer: VOEEST

    lathe brand vöest type da 360 distance between centers 1000mm center height approx 360mm spindle bore 85mm lathe chuck diameter 400mm faceplate diameter 600mm drehzehl 11.6 to 1000 u / min swing d...

  • System 3R 20mm Manual Lathe Chuck # 3R-321.2-4x90

    $970 - Oak Park, IL Recently Added
    • Manufacturer: System 3R

    manufacturer's suggested retail price: $1,940.00 quantity: 1

  • 2012 CHEVALIER FBL-360B CNC LATHE WITH FANUC OiTD CONTROL, 15″ CHUCK

    $79,500 - Bethlehem, PA
    • Manufacturer: Chevalier
    • Spindle Bore: 4.1”
    • Distance between Centers: 40.1”

    specifications capacities swing over bed: 30.3” swing over carriage: 21.6” maximum turning diameter: 22.4” maximum turning length: 32” distance between centers: 40.1” headstock spindle nose: a2-11 ...

  • 1949 NILES LATHES

    $39,500 - Dodge Center, MN
    • Manufacturer: Niles

    niles (used) model 48" x 360" engine lathe swing over ways ............ 50" swing over cross slide ..... 28.5" chuck size ................. 48" 4 jaw center distance ............ 360" rpm range ......

  • 1998 18.11" Swing 11.81" Centers Daewoo Lynx 200A CNC LATHE, Fanuc 21T, 6" chuck, Tailstock

    $16,500 - Harrison, NJ
    • Manufacturer: Daewoo
    • Spindle Bore: ........... 2.09"
    • Spindle Nose: .................... A2-5

    daewoo lynx 200a cnc turning center new: 8/1998 swing over bed: .................. 18.11" swing over saddle: ............... 13.78" recommended machining daimeter: .. 6.5" maximum machining diamete...

  • ROUGHNECK 26” x 80” Hollow Spindle Lathe

    $53,505 - Houston, TX
    • Manufacturer: ROUGHNECK

    26” x 80” roughneck hollow spindle lathe model hr-vs 26x80g, 6.1” spindle bore, 15hp variable speed in (4) ranges 4-way rapid traverse, 11” steady rest, taper, 20” 4-jaw chuck, removable gap new. s...

  • 1947 BULLARD Cutmaster 36" vertical turret lathe, High Column, 3-Jaw Chuck, Max Swing 45", Side Head

    $22,500 - Connecticut, USA
    • Manufacturer: Bullard

    bullard cutmaster 36" vertical turret lathe, high column 3-jaw chuck swiveling turret head 30 deg. swing with side head 39" max swing 45", side head below table side head speeds 3.3 - 240 rpm t.d.a...

  • Galaxy Nova 200 Lathe

    $8,900 - Sanford, FL Recently Added
    • Manufacturer: Galaxy

    1995 galaxy nova 200 lathe specifications: chuck size: 7.874" bar capacity: 1.575" 2 axis power: 10hp max rpm: 6000 rpm turning diameter: 13.78" swing: 15.75" machining length: 15.75 control: fanuc...

  • Hardinge DV-59 Lathes

    $250 - Portland, OR Recently Added
    • Manufacturer: Hardinge
    • Model: DV-59

    usage: 2nd operation qty. available: 2 collet capacity: 1-1/16" chuck capacity: 6" step chuck / 5" jaw chuck electrics: 220/460 volt, 3 phase, 60 cycle horsepower: 1 i am open to all offer...