• 1999 HARDINGE COBRA 51 CNC LATHE HB-20304

    $21,500 - Bethlehem, PA, USA
    • Manufacturer: Cobra

    horsepower rating (intermittent): 20 hp horsepower rating (continuous): 15 hp torque rating(intermittent): 63 ft-lb @ 1,666 rpm base speed torque rating (continuous): 47.2 ft-lb  1,666 rpm base spe...

  • Lodge & Shipley XC16 42519

    No price - Washington, PA, USA
    • Manufacturer: Lodge & shipley
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 102.00 in 2590.80 mm

    steady rest, taper attachment, tool post power: 3 ph / 50-60 hz / 200 – 500 v existing | weight: 8500.00 lbs 3863.64 kg | coolant: none | chuck type: 10” 3-jaw universal and 15” 4-jaw independent |...

  • 1960 Cincinnati 18” Tray Top with Gap 2W4U5E-13

    No price - Washington, PA, USA
    • Manufacturer: Cincinnati
    • Spindle Bore: 1.75 in 44.45 mm
    • Distance between Centers: 108.00 / 120.00 in 2743.00 / 3045.00 mm

    steady rest, full length hydraulic, scanamatic tracer

  • Harrison Alpha 550 Used CNC Manual Plus Engine Lathe

    $11,500 - Dousman, WI, USA
    • Manufacturer: Alpha

    harrison alpha 550 used cnc manual plus engine lathe specifications swing over bed ways 21.7” swing over cross slide 14.5” distance between centers 80.0” spindle bore 3.5” spindle nose d1-11 spin...

  • MORI SEIKI LL8A -1500 CNC LARGE CAPACITY LATHE

    No price - Cleveland, OH, USA Recently Added
    • Manufacturer: Capacity

    flat bed cnc lathe approx. 66 in. swing over bed, 59 1/2 in. 4-jaw manual chuck, . swing over crosslide 38" 59 in. travel z axis travel fanuc 15t cnc 14 1/2" square heavy duty twin turret 4 in. spi...

  • 1979 LeBlond 2516 NF Heavy Duty 3NFL-1312

    No price - Washington, PA, USA
    • Manufacturer: Leblond
    • Distance between Centers: 96.00 in 2438.40 mm

    general electric 125 hp variable speed drive, multiplex rpm digital readout, power operated tailstock

  • Taiyo Seiki KY-8035N 0-102

    No price - Washington, PA, USA
    • Manufacturer: Taiyo Seiki
    • Spindle Nose: 20.50 in 520.00 mm

    maximum distance between spindle nose and turret face: 65 in (1650mm), free standing hydraulic unit

  • 2000 LeBlond 50/30 Raised 4625 NK Tape Turn I – Flat Bed 2NK506

    No price - Washington, PA, USA
    • Manufacturer: Leblond
    • Spindle Bore: 3.06 in, 77.777 mm
    • Distance between Centers: 180.00 in, 4572.00 mm

    press-in center-in chuck, feedrate range .1 to 150 inches per minute, tailstock quill travel 18 in (457.2 mm), carriage length on ways 46.75 in (1187mm), bed width 34 in (863.6mm), quick change sli...

  • 2008 3029, HAAS, SL-10, CNC Lathe w/Servo Bar Feed, 2008

    No price - Enfield, CT, USA
    • Manufacturer: Haas
    • Model: SL-10

    equipped with: 16c collet chuck misc turret tooling chip auger losma mist collector model darwin 600 servo bar feed 300 208-230 volt 3 phase 60 cycle haas controls manuals hours servo on time 1603 ...

  • 1970 Herkules WDK600 5578574

    No price - Washington, PA, USA
    • Manufacturer: Herkules
    • Distance between Centers: 250.00 in 6350 mm
    • Spindle Nose: 1.25 - 100 Rpm, 4 Ranges, Infinitely Variable

    two turning saddles, monoblock construction with four guideways (two for carriage, and two for tailstock), bed width 63 inches (1600 mm), 24 ton tailstock force gauge, steady rest (roller type), ma...