Building Filters
CLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox
- Manufacturer: Clausing/Colchester
- Model: 15"
CLAUSING Colchester 15 inch METAL LATHE Quick Change Gearbox Well, if you have a Clausing 15 that has a gear out in your quick change gear box this lathe just came in that has two bad gears and a bad shaft in the...
$1,750 USDOregon, OHCLAUSING Colchester 15 inch METAL LATHE Cast Iron Bed or Legs
- Manufacturer: Clausing/Colchester
- Model: 15"
Clausing Legs Both Headstock End and Tailstock End Well, if you have a Clausing 15 with a broken leg or end bracket we have a nice set here. This had a worn gearbox and was taken for a parts machine. We do have o...
$950 USDOregon, OH- Trusted SellerAuction
Millersburg, OHVisit Auction Website - Trusted SellerAuction

Sharp 1118H Metal Lathe
- Manufacturer: Sharp
Sharp 1118H Metal Lathe, 220V, 1.5 HP, featuring a digital RPM display, tool post, coolant system, phase 3, frequency 60 Hz, maximum swing over bed approximately 11 inches, distance between centers approximately ...
Blossburg, PAVisit Auction Website - Trusted SellerAuction

Pratt & Whitney Metal Lathe Model B
- Manufacturer: Pratt & Whitney
Pratt & Whitney Metal Lathe Model B, Serial No. 79, Circa 1924, Swing Over Bed: 10 inches (25.4 cm), Distance Between Centers: 24 inches (61 cm), Spindle Bore: 1 inch (2.54 cm), Spindle Speed Range: 30 - 1,200 RP...
Blossburg, PAVisit Auction Website - Trusted Seller

Baileigh PL-1340 metal lathe
- Manufacturer: Baileigh
- Model: PL-1340
- Spindle bore: 1.5 mm
Baileigh PL-1340 metal lathe Equipped with a Mitutoyo DRO, quick-change tool post, and cast iron base, this compact gear-head metal lathe is one of the most rigid in its class. Features 2 hp motor runs on 220-vol...
- Trusted SellerAuction

LeBLOND RKL-1960G Metal Lathe
- Manufacturer: Leblond
- Model: RKL1960G
LeBLOND RKL-1960G Metal Lathe, 19" swing over bed, 60" distance between centers, 3.07" spindle bore, spindle speed range of 30-2000 RPM, 10 HP motor, 230V, 3-phase, 60 Hz, 22.9 F.L. Amps, equipped with Newall DP7...
Blossburg, PAVisit Auction Website - Trusted SellerAuction

Rockwell 11" × 36" Geared Head Metal Lathe, Swing: 11", 8" Chuck, Centers: 36", Headstock: Geared, B...
- Manufacturer: Rockwell
- Model: 11 X 36
Rockwell 11" × 36" Geared Head Metal Lathe, Swing: 11", 8" Chuck, Centers: 36", Headstock: Geared, Bed: Hardened Ways, Gearbox: Quick-Change
High Point, NCVisit Auction Website - Trusted Seller

Summit 22″ Metal Lathe
- Manufacturer: Summit
Product Description General Info Stock #: Summit-22P Brand: Summit Model: 22″ Precision Approx. Shipping Weight: 7,150 lbs. Specifications Swing over bed: 22 in. Swing over cross slide: 12.5 in. Swing over gap: 3...
Stone Mountain, GA - Trusted Seller

Baileigh PL-2080 precision metal lathe
- Manufacturer: Baileigh
- Model: PL-2080
- Spindle bore: 79.38 mm
Baileigh PL-2080 precision metal lathe Everything about the PL-2080 industrial lathe is powerful, from its hardened slideways to the cast iron base. Features 15 hp motor runs on 220-volt 3-phase power with 12 spe...
- Trusted Seller

Summit 18″ & 20″ Metal Lathe
- Manufacturer: Summit
Product Description General Info Stock #: Summit-1820 Brand: Summit Model: 18″/20″ Big Swing Approx. Shipping Weight: 5,500 lbs. (60″ centers) Specifications Swing over bed (18″ Series): 18 in. Swing over bed (20...
Stone Mountain, GA - Trusted Seller

Summit 20″, 24″, 28″ Metal Lathes
- Manufacturer: Summit
Product Description General Info Stock #: Summit-202428 Brand: Summit Model: 20″/24″/28″ Specifications Swing over bed (20″ Series): 20.25 in. Swing over bed (24″ Series): 25 in. Swing over bed (28″ Series): 28.5...
Stone Mountain, GA - Trusted Seller

Summit 30″ Swing Metal Lathe
- Manufacturer: Summit
Product Description General Info Stock #: Summit-30 Brand: Summit Model: 30″ Big Bore Approx. Shipping Weight: 10,780 lbs. (approximate) Specifications Swing over bed: 29.9 in. Swing over cross slide: 20.5 in. Di...
Stone Mountain, GA - Trusted Seller

Summit 16L Metal Lathe
- Manufacturer: Summit
Product Description General Info Stock #: Summit-16L Brand: Summit Model: 16L Approx. Shipping Weight: 2,112 lbs. (40″ centers) / 2,508 lbs. (60″ centers) Specifications Swing over bed: 16 in. Swing over cross sl...
Stone Mountain, GA - Trusted Seller

Summit 16″ Heavy Duty Metal Lathe
- Manufacturer: Summit
Product Description General Info Stock #: Summit-16HD Brand: Summit Model: 16″ Heavy Duty Approx. Shipping Weight: 6,200 lbs. (40″ centers) Specifications Swing over bed: 18 in. Swing over cross slide: 9.375 in. ...
Stone Mountain, GA
