Building Filters
- Trusted Seller
DURMA PB 4
- Manufacturer: Durma - Durmazlar
DURMA (NEW) MODEL PB 4 PANEL BENDER 13.8" TO 110.2" BENDING LENGTH 5' X 10' SHEET 6" MINIMUM BENDING WIDTH 10" MAXIMUM BENDING HEIGHT 2" MAXIMUM BENDING DEPTH 130 DEGREE MAXIMUM DIAGONAL 500 KN BENDING FORCE 1,00...
Dodge Center, MN 
Potdevin 42'' Rotary Applicator #42-88W, 1/2 hp 115/230V Port. Frame w/Castors
- Manufacturer: Potdevin
42" Potdevin Portable Rotary Applicator Size: 42-88W No: 2-104 42'' Length Motor: 1/2 Hp, 115/230V, 1 ph, 60 Hz Motor RPM: 1725 Gear Reducer Output RPM: 100 Portability features: Single Phase Motor Mounted on Ste...
$3,750 USDCedarburg, WI
Edwards Elite 110 Ton Ironworker 230V, 1PH, With Powerlink
- Manufacturer: Edwards
- Model: Elite 110
The ELITE 110 Ton offers four workstations and affords the ability to customize the open workstation with one of 13 attachments, and 14 additional accessories available to further improve productivity. This compa...
Edwards Elite 110 Ton Ironworker 460V, 3PH, With Powerlink
- Manufacturer: Edwards
- Model: Elite 110
The ELITE 110 Ton offers four workstations and affords the ability to customize the open workstation with one of 13 attachments, and 14 additional accessories available to further improve productivity. This compa...
- Trusted Seller
30 Gal Stainless Metals Inc. Tank, S/S, 10#
- Manufacturer: Stainless Metals Inc.
30 Gal Stainless Metals Inc. Tank, S/S, 10# Used approximately 30 gallon Stainless Metals Inc. tank, stainless steel construction, dish top and bottom, rated 10 psi to full vacuum at 250 F, with (2) 2" sanitary ...
Cleveland, OH - Trusted Seller
2014 RAS Turbobend 61.31 120" CNC Folding Machine ()
- Manufacturer: RAS
- Model: 61.31 TurboBend
Imperial Metric RAS Turbobend 61.31 120" CNC Folding Machine Maximum Sheet Thickness 16 ga/1.5mm Automatic CNC folding beam adjustment .05”-.244” Maximum Length 124”/3150mm Motor Drive Power Upper Beam 1 hp/.75 k...
Elk Grove Village, IL 
Baileigh Shrinker Stretcher Mss-18
- Manufacturer: Baileigh
- Model: MSS-18
Looking for the perfect entry-level metal shrinker and stretcher? Our 2-headed design saves time. No need to switch jaws! Unlike most competitors, we include a stand with foot pedal control with this MSS-18 sheet...
$1,187 USDLebanon, NJ
Baileigh Shrinker Stretcher Mss-16
- Manufacturer: Baileigh
- Model: MSS-16
With an 8” throat depth and 16 gauge mild steel capacity, this manual shrinker stretcher is a great bargain for any shop. Recommended for: Automotive and airplane shops that need greater throat depth from their s...
$1,622 USDLebanon, NJ- Trusted Seller
2018 RAS 61.31 Turbobend 16 ga. x 122" CNC Folding Machine
- Manufacturer: RAS
- Model: 61.31 TurboBend
Features: System 6000 CNC Control Electric Foot Switch Equipped With: System 6000 CNC Control Electric Foot Switch Safety Light Curtains NOTE: Inspect In Plant Under Power
Melville, NY - Trusted Seller
RAMS RAMS-2006 #84386
- Manufacturer: Rams
- Model: -2006
FEATURES: This unit comes with a 1 HP electric motor, 110-115V single phase. We use Torrington Needle Bearings and hardened steel components throughout, (62 Rockwell). The cabinet is heavy gauge steel with a Hamm...
Ames, IA - Trusted SellerAuction
Glassboro, NJVisit Auction Website - Trusted Seller
Stainless Steel 316 Metalfab Bin - IPP# 246783
- Manufacturer: Metalfab
Live bottom motion generator (53-VM-510) is a type CD18-5380, serial # 837356. rated for 5380 lbs of force 1800 rpm. 3 HP, 230/460 volts 3 ph. 60 Hz.
Princeton Junction, NJ 
Baileigh Planishing Hammer Ph-24A
- Manufacturer: Baileigh
- Model: PH-24A
This air-powered planishing hammer can transform wrinkled or dented metal into smooth finished products. A great value, the PH-24A can also do light metal shaping on soft materials. 24” throat depth. 16 gauge mil...
$1,649 USDLebanon, NJ- Trusted Seller
2014 Salvagnini Sheet Support Followers
- Manufacturer: Salvagnini
NOTE: Sheet Supports are Brand New, There is no Wiring Harnesses or Power Traks
Melville, NY - Trusted Seller
2012 HydraPower CNC 4M V Groover
- Manufacturer: HydraPower
- Model: CNC 4M
Equipped With: Siemens CNC Control Pneumatic Front & Rear Clamping NOTE: Inspect in Plant Under Power
Melville, NY 
Edwards E120J5 Sheet Metal Processing
- Manufacturer: Edwards
- Model: E120J5
Good condition Edwards E120J5 Sheet Metal Processing. Located in USA and other countries. Click request price for more information.
USA