• Menkia moulder osi

    $169,000 - Gillett, WI
    • Manufacturer: Osi menkia woods

    2010 5 head canadian moulder to produce preaum beveled hard wood flooring ready to run has opposing side head's over 700,000.replament cost max 400ft per min

  • IIDA MOULDER-MX-181

    $10,000 - Grand Rapids, MI
    • Manufacturer: MX

    5-head through feed moulder, built 1986. 180mm x 125mm (7” x 5”) capacity. 6,000 rpm spindles. 20-100 fpm variable feed speeds. pneumatic tensioned powered feed rolls through machine. -first bo...

  • NORTHTECH MOULDER-623P

    $32,500 - Grand Rapids, MI

      1-used northtech model 623p six (6) head feed through moulder. with 7.5 hp feed, for feed range of 20 to 120 fpm. with 15 hp on the first bottom head, 10 hp right side head, 10 hp left side head, ...

    • WEINIG P23E MOULDER

      $18,995 - United States
      • Manufacturer: Weinig

      midwest weinig p23e feed through moulder:9-1/16" x 4-11/16" stock capacity with head sequence as follows: 7.5 kw first bottom spindle, 11 kw for right and left spindles, 11 kw for top spindle, and ...

    • KENTWOOD FIVE HEAD FEED THRU MOULDER-M-507EL

      $23,500 - Grand Rapids, MI

        used kentwood model m-507el five head feed thru moulder; with a working capacity of 5″ thick x 7″ wide; equipped with a 7.5 hp motor belted to the first bottom spindle; with a second right spindle ...

      • 2009 LEADERMAC LMC-518S MOULDER (FEED THROUGH)

        $19,772 - Charlotte, NC
        • Manufacturer: LMC
        • Elect./Voltage: 460 V, 60 Cy, 3 Ph

        elect./voltage: 460 v, 60 cy, 3 ph leadermac lmc 518 s "smartmac" feed through moulder; 5-head (b-r-l-t-b) with a working cap. of 7" x 5".head sequence: bottom 7.5 hp, right/left 15 hp, top 15 hp a...

      • Stegherr BOF Arch Moulder / Shaper

        $3,200 - United States
        • Manufacturer: Stegherr
        • Model: BOF

        northeast us stegherr model bof arch  moulder / shaper machine. feeds and contours parts with a radius of 6" or more and material height of 3-1/4" horizontal spindle 4.3 kw, 14 amps, 220 volt 5" to...

      • 2001 Mikron M645 Multi-Moulder

        $8,990 - United States
        • Manufacturer: Mikron

        southern us mikron m645 moulder unit size:             34" wide x 30" deep x 65" high (5' min. front to back clearance needed) worktable size: 38 wide x 24" deep weight: approx. 1400 lbs. motor:  7...

      • Mikron 645 Multi-Moulder (Used)

        $9,500 - United States
        • Manufacturer: Mikron

        mikron model m645 "multi moulder" with tilting spindle;  5hp 3-phase 230v spindle motor; 6000rpm spindle speed; 1 1/4" x 6" horizontal spindle, variable speed feed; 0-30fpm with reverse; pro-sc...

      • LINARES LATERAL MOULDER FEEDER-FEEDMASTER IF-80

        $22,500 - Grand Rapids, MI

          working length 1800 mm to 6100 mm (6′ to 20 ft) working width 50 mm to 300 mm (2″ to 10″) working thickness 12 to 100 mm (1/2″ – 4″) lateral feed chain chain drive motor 0.5 hp number of chain beam...