Used nip roll in igirisu

63" High End Warm Assist Laminator, Single Piece Metal Construction

63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover Description This 63" Full - auto Wide Format Roll Heat Assisted Laminator with Stand can be widely used for pre - ...

63" High End Warm Assist Laminator, Single Piece Metal Construction

63" High End Warm Assist Laminator, Single Piece Metal Construction with Entire ABS Tooling Cover Description This 63" Full - auto Wide Format Roll Heat Assisted Laminator with Stand can be widely used for pre - ...

Comerio Ercole (Italy) 610mm dia x 1700mm 3 roll vertical stack calender

• Manufacturer: Comerio Ercole

Qty 1 x Comerio Ercole (Italy) 610mm dia x 1700mm 3 roll vertical stack calender, Serial no. 3097A, Original year 1977, but overhauled by Comerio in 2006, Motorised nip adjustment, Even and friction gears, Sl...

Amut PET,PP & PS ; 1000mm sheet extrusion line. 75mm extruder, eti#33.000

• Manufacturer: Amut

1000mm Amut PET,PP & PS sheet extrusion line. 75mm extruder, gear pump. 1000mm die. 1000mm 3 roll stack, haul off Accumulator and winder. 2016 * 3 component gravimetric dosing unit. * 75mm extruder Model EA75. ve...

Two Roll Lab Mill – JRD BIPEL

• Manufacturer: Bipel

Two Roll Rubber Mixing Laboratory Mill 300mm x 150mm rolls Roller type bearings Nip fully guarded Motorised nip adjustment Roller speed variable up to 32 rpm Grease lubrication Roller reverse system

Reed 40” x 16” Two Roll Mill

• Manufacturer: Reed

Reed 40” x 16” Two Roll Mill Hand operated nips Right angle drive Tray fitted beneath Mill Rolls

Battenfeld PET sheet line with Dryer. 1200mm wide eti#33.000

• Manufacturer: Battenfeld

1200mm Wide Battenfeld Gloenco PET Sheet Line VERY COMPLETE LINE WITH: IRD crystalizer Dryer, 120mm Extruder, Gneuss Screen Changer, Gear Pump, 1400mm Die, Roll Stack, Haul Off Winder. * 3200 litre Container mode...

Comerio 1550mm Two Roll Mill

• Manufacturer: Comerio Ercole

Two Roll Rubber Mixing Mill Periphery drilled Rotary joints for steam heating / water cooling Front roll = 10.72 rpm (18.51 m/min) Rear roll = 12.76 rpm (22.03 m/min) Friction: 1:1.19 Speed regulator Motor beneat...

Bridge 60” x 22” Two Roll Mill

• Manufacturer: Bridge UK

60” x 22” Two Roll Mill With variable speed control Siemens S7 – 1200 Safety PLC Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1...

Two Roll Mill 1m wide x 400mm diam.

Two Roll Mill 1m wide x 400mm diam. Hydraulic Nips With motor and gearbox AEG motor, 380volts, 107amps, 55kw, 1475rpm, 50 cycles Unidrive Lunn Safety gear fitted front and back of Mill Complete with control panel...

Leistritz Lab Sheet Line, Model ZSE27 MAXX-40D

• Manufacturer: Leistritz

Used-Leistritz Lab Sheet Line, Includes the following: Leistritz Extruder  Model ZSE27 MAXX-40D. 29.8 Kw Main Drive, 1200 rpm Screw Speed. 320 Hours. (4) Schenck Feeders. (2) AEC Chilling Units. (1) Sterlco Unit....

55in Full-auto Wide Format Cold Laminator

55in Full-auto Wide Format Cold Laminator with Heat Assisted Description Qomolangma 55in full-auto wide format roll to roll top heat assist laminator and mounting machine. No wrinkle, no silvering, no slidding! E...

55in Full-auto Wide Format Cold Laminator

55in Full-auto Wide Format Cold Laminator, with Heat Assisted + 2 Years Warranty Description Qomolangma 55in full-auto wide format roll to roll top heat assist laminator and mounting machine. No wrinkle, no silve...

55in Full-auto Wide Format Cold Laminator

55in Full-auto Wide Format Cold Laminator, with Heat Assisted + 2 Years Warranty Description Qomolangma 55in full-auto wide format roll to roll top heat assist laminator and mounting machine. No wrinkle, no silve...