Building Filters
1968 NATIONAL M10 (5/16")
- Manufacturer: National
- Model: M10
Dies: 5 | Max. across flats (mm): 14 | Max. die kick out (mm): 19 | Max. pieces per minute: 150
Kópavogur, Iceland
1972 NATIONAL M10 (5/16") -S2
- Manufacturer: National
- Model: M10
Dies: 5 | Max. across flats (mm): 14 | Max. die kick out (mm): 19 | Max. pieces per minute: 200
Kópavogur, Iceland- Trusted Seller
BIRMINGHAM RF-31
- Manufacturer: Birmingham
BIRMINGHAM 1-1/4" Mill Drill Machine RF-31 This machine has, several uses, such as surface cutting, drilling, milling, and also can be equipped with an electric switch for tapping. This machine is of fine quality...
Port Orange, FL 
2020 Makino A51NX
- Manufacturer: Makino
- Model: A51
The Makino A51 NX is a high-performance horizontal machining center designed for precision, speed, and reliability in high-volume manufacturing environments. Featuring a 400mm pallet size, a 14,000 RPM high-torqu...
Fremont, CA
SMC NCDA1X600-1400-M9PL cylinder, nca1, tie rod, TIE ROD CYLINDER
- Manufacturer: SMC
- Model: NCDA
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expa...
$997 USDYorba Linda, CA
SMC NCDA1B250-1000-M9BAVSBPC-XC6 cylinder, nca1, tie rod, TIE ROD CYLINDER
- Manufacturer: SMC
- Model: NCDA
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expa...
$2,951 USDYorba Linda, CA
SMC NCDA1X600-1200-M9BVSDPC cylinder, nca1, tie rod, TIE ROD CYLINDER
- Manufacturer: SMC
- Model: NCDA
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expa...
$999 USDYorba Linda, CA
SMC NCDA1B250-0500-XC22 base cylinder, NCA1 TIE-ROD CYLINDER
- Manufacturer: SMC
- Model: NCDA
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expa...
$1,979 USDYorba Linda, CA
SMC NCDA1R800-0450 "cylinder, TIE ROD CYLINDER
- Manufacturer: SMC
- Model: NCDA
Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expa...
$999 USDYorba Linda, CA- Trusted Seller
DH-28
- Manufacturer: Ficom
CSA ELECTRICS: 220V/1PH/60HZ COMES WITH THE FOLLOWING STANARD ACCESSORIES: DRAW BAR, ADAPTER, TAPER SHANK FOR DRILLING CHUCK, DRILLING CHUCK, ARBOR, T-SLOT BOLT, WASHER, NUT, TILTED WEDGE, SPANNER AND OIL GUN ...
Calgary, Canada 
40T 34″ L TO R X 39″, 28″ DAYLIGHT, 10″ STROKE, FOUR-POST
HESS MODEL 40-3238-10-18. S/N A3517. BETWEEN THE POSTS: 37” X 27”. BETWEEN THE GUIDE BUSHINGS: 34” X 24”. NOMINAL: 34” X 39”. CLAMP CYLINDER: PARKER 8” BORE (SERIES 3H; 5” DIA ROD; 3000 PSI) WITH 10” MAX STROKE. ...
Grand Rapids, MI- Trusted Seller
Sharp RD-2500
- Manufacturer: Sharp
- Model: RD-2500
- Column size: 549.91 millimeter
NEW SHARP 21.65" COLUMN, 98.42" ARM, RADIAL DRILL MODEL: RD-2500 **MADE IN TAIWAN** FEATURES: Hardened and Ground Arm slide ways, gears Arm Elevation is controlled by Hydraulic Motor Safety Device prevents arm ...
Harrison, NJ - Trusted Seller
WILLIS MACHINERY RD1300H
- Manufacturer: Willis
WILLIS MACHINERY (NEW) MODEL RD1300H RADIAL DRILL 2" STEEL DRILLING 2-3/8" CAST IRON DRILLING 1-1/4" STEEL TAPPING 1-1/2" CAST IRON TAPPING 3-1/2" STEEL BORING 5" CAST IRON BORING 9-7/8" SPINDLE STROKE MT5 SPINDL...
Dodge Center, MN - Trusted Seller
SHARP RD-2500
- Manufacturer: Sharp
- Model: RD-2500
- Column size: 549.91 millimeter
SHARP 2.56" Radial Drill RD-2500 This is a high performance machine ideal for drilling, tapping , boring, reaming, lapping, screwing, counter boring, spot facing, and much more, on materials such as cast iron and...
Port Orange, FL - Trusted Seller
WILLIS MACHINERY RD-1100
- Manufacturer: Willis
- Model: RD-1100
WILLIS MACHINERY (NEW) MODEL RD-1100 RADIAL DRILL 1-3/4" STEEL DRILLING 2-1/8" CAST IRON DRILLING 1" STEEL TAPPING 1-1/4" CAST IRON TAPPING 3-3/8" STEEL BORING 4-3/4" CAST IRON BORING 9-7/8" SPINDLE STROKE MT4 SP...
Dodge Center, MN