Used pharma

Hartness Lowering Head Case Packer

Item is a used, Hartness model M 500, lowering head, drop style case packer. T,his is a very small footprint machine having a short bottle infeed section. The machine comes with change parts for 12 oz. longneck a...

Elliott Hot Melt Case Sealer

• Manufacturer: Elliott

Item is a used, Elliott, hot melt, top only case sealer model 76-10 custom. The machine is equipped with a Nordson Problue glue system and Saturn right angle nozzles. The infeed end of the machine is fitted with ...

Best Pack Taper

Item is a used, Best Pack, semi-automatic top/bottom case taper. Machine is equipped with side belt drive, and top only, 2" tape head. 120 volt single phase power requirement

McBrady Orbit Rinser

Item is a used, McBrady, model 200,orbit rinser. The machine is equipped with a 54 inch diameter wheel and is currently set up for large mouth jars, including large round containers with 110MM closure.. It is equ...

36" Rotary Accumulaltion table

• Manufacturer: ATE

condition: Very Good Item is a used, 36" rotary accumulation disk. Machine is all S/S construction with variable speed controls.(NEMA 4). Power requirement is 120 volt/single phase.

2020 Crown TSP6500-33 – CSA Certified Turret Forklift | Brampton, ON | 3,300 lb Capacity | 231" MonoLift Mast | Wire-Guided | Lithium-Compatible

• Manufacturer: Crown
• Model: TSP 6500
• Hours: 9,248 h
• Lifting capacity: 1,000 kg

CSA-Certified Turret Forklift | Crown TSP6500-33 | 3,300 lb | MonoLift Mast 231” | Wire-Guided | Lithium-Compatible | Brampton ON Professionally reconditioned and CSA/MOL certified for wire‑guided very narrow ai...

Inline Filling Systems model "NT" Inline Capper

• Manufacturer: In-Line

Item is a used, Inline Filling Systems, fully automatic, model "NT" inline capper. THIS IS A HAZARDOUS DUTY, EXPLOSION PROOF MACHINE PREVIOUSLY UTILIZED IN A DISTILLERY APPLICATION. The machine was manufactured i...

2019 SPX/Waukesha 2065

• Manufacturer: Waukesha
• Model: 2065

Item is a used SPX/Waukesha, model 2065, centrifugal pump. Pump has all S/S contact parts and is equipped with a clamp style pump head. The port sizes are 2 1/2" X 2". It is mated to a 5HP, Baldor washdown motor ...

SPX/Waukesha 030 U2AP

• Manufacturer: Waukesha
• Model: 030U2

Item is a used, SPX/Waukesha, size 030 U2AP, positive displacement pump. Pump has all stainless steel contact parts wit 1 1/2" Tri-Clamp ports. The pump is mated to a 1 1/2 HP, S/S clad Baldor motor and a Falk pa...

IAC Model 20000 Uncaser

condition: Good Item is a used IAC Model 20000 uncaser. This machine is all stainless construction. It is a high speed rotary head uncaser. The machine is designed to decase bottles with a rotary head from full d...

Elliott HMT Mini Case Sealer

• Manufacturer: Elliott

Item is a used, Elliott, hot melt, top only, automatic case sealer. It is a model HMT Mini 79-10-10. It is equipped with a Nordson ProBlue glue system. Case size range is 8"x18" L; 6"x16" W; 3"x16" H. Machine is ...

Bottle Twist Section/Trough

Used twist section and trough for a 12 oz. heritage or longneck style glass beer bottle. A drive section can also be added to this machine and twists for other bottle sizes are available. This twist section was u...

New Stock G&D -70H-2C 70 hp Glycol Chiller

• Manufacturer: G&D

Item is a new stock G&D 70 hp chiller package. This is a turn-key glycol chiller that includes the following: REFRIGERATION CIRCUIT DESCRIPTION -(2) semi hermetic reciprocating compressors -High efficiency brazed...

Best Pack Top/Bottom Taper

Item is a used, Best Pack, top/bottom, semi-automatic case taper. The machine is equipped with side belt drive and 2" tape heads. Set up with top/bottom tape heads. Power requirement is 120 VAC.

SWF McDowell Case Sealer

• Manufacturer: SWF/McDowell

Item is a used, fully automatic, SWF McDowell, hot melt, case sealer. This is a small foot-print machine measuring approximately 8'6" long. The machine utilizes side and bottom powered belts for case control and ...