Used piegatrice

2002 I.M.A.L Pressa Piegatrice 7100 Lexus 420.71 33' x 420 Ton Hydraulic Press Brake ()

• Manufacturer: Imal

Imperial Metric Excellent Condition, No Leaks. All Functions Run Very Well

PRESSA PIEGATRICE SOMO DA4000X100TON, IDRAULICA PRESSA PIEGATRICE SOMO DA4000X100TON, IDRAULICA

• Manufacturer: Somo

COMPLETE WITH GOOD BLADE AND PRISM, CENTINED PRISM HOLDER TABLE, RECESS 750 DIMENSIONS4100X2050XH2880 MEASURED, WEIGHING 119Q. THE FRONT AND THE 2 SIDES MUST BE BURIED 250MM, THE REAR REGISTER IS A FRONT CRANK ...

MANUAL PRESS BRAKE BELGIUS TYPE

• Manufacturer: PRESSA PIEGATRICE MANUALE TIPO BELGIUS

OPENING/CLOSING THE SHEET METAL WITH A SPECIAL MANUAL HANDWHEEL IT'S BEAUTIFUL, THE BLADES ARE BEAUTIFUL, TESTED, WORKS WELL DIMENSIONS 2800X550XH 1150 + COUNTERWEIGHT TO BE REMOVED, WEIGHT 1600 KG

SCHIAVI 2000X35 PRESS BRAKE

• Manufacturer: Schiavi

COMPLETE WITH NEW BLADE AND PRISMS WITH 2 MANUAL REAR ADJUSTERS NEWLY PAINTED MACHINE DIMENSIONS 2050X990X1800 WEIGHT 2000KG NO PHOTOCELLS NO SAFETY DEVICES QUIET WITHOUT OIL LEAKS MACHINE WORKING AS IS

PRESS BRAKE CBC4050X40

• Manufacturer: PRESSA PIEGATRICE CBC4050X40

PNEUMATIC CLUTCH MECHANICS RECESS 300? COMPLETE WITH BLADE AND PRISM 2 MANUAL REAR REGISTER PHOTOCELLS ON NON-EC SUPPORTS, NOT TO BE CONSIDERED MAKES IMPULSES AND SINGLE WORKING MACHINE DIMENSIONS 1600X450...

OMAG4000X70 HYDRAULIC PRESS BRAKE

• Manufacturer: PRESSA PIEGATRICE OMAG4000X70 IDRAULICA

MODEL PO 70-30 HOLLOW 300 REGISTER WITH BAR IT HAS 2 MOBILE TURRETS CONTROL WITH SPECIAL CRANK ON THE FRONT, WITH SPECIAL MILLIMETRE COUNTER MACHINE WITH 75X75 PRISM WITH 6 SLOTS 60/35/20/15/12/10 PRESSING F...

3000X100 BARIOLA PRESS BRAKE

• Manufacturer: PRESSA PIEGATRICE BARIOLA DA 3000X100

MACHINE WITH PHOTOCELLS NOT TO BE CONSIDERED BLADE AND PRISM OF 110X110 VARIOUS SLOTS, BACK REGISTER AND CNC VALID BUT TO BE CHECKED, IF IT IS BEST TO PUT IT INTO FUNCTION MACHINE TO TEST AND CHECK DATA TOTAL ...

OMAG PRESS BRAKE 2550X30TON

• Manufacturer: Omag

HYDRAULIC COMPLETE WITH BLADE AND PRISM, 2 MANUAL REAR ADJUSTERS IT WORKS WITH UP AND DOWN IMPULSES WITH AUTOMATIC DELAY MACHINE WITH PHOTOCELLS NOT TO BE CONSIDERED THE MACHINE WORKS WELL WITH GOOD BLADE AN...

BENDING PRESS COLGAR 4100X120 TON

• Manufacturer: Colgar

SCHIAVI RG204 4000 X 200 PRESS BRAKE

• Manufacturer: Schiavi

WITH NEW 2 AXIS POSITIONER COMPLETE WITH 1 BEAM PHOTOCELLS NEW ELECTRONICS CHECKED MACHINE WITH NEW BLADES AND PRISMS ONLY THE FRONT PAINTED MACHINE WITH LONG TANK IT MUST BE KEPT 30 CM RAISED FROM THE GROUN...

1500X15 TON FEMAS PRESS BRAKE

• Manufacturer: Femas

PNEUMATIC CLUTCH MECHANICS COMPLETE WITH VALID BLADE AND PRISM AND TWO MANUAL REAR ADJUSTERS, 43/15/10 SLOTS PHOTOCELLS NOT TO BE CONSIDERED USED MACHINE, WORKING, DOES SINGLE/PULSES/APPROACH MACHINE SPINS WE...

GERMAN HYDRAULIC PRESS BENDING 4000X50 TON

• Manufacturer: PRESSA PIEGATRICE TEDESCA 4000X50 TON IDRAULICA

BICOGNATA PASSAGE BETWEEN SHOULDERS 3000 COMPLETE OF: - CURRENT BLADE AND PRISM - MECHANICAL PEDALS - PHOTOCELLS ON THE FRONT, NEW, 300MM HIGH "CE" - PHOTOCELLS ON THE BACK, NEW, 600MM HIGH "CE" - NEW ELEC...

2500X60 TON HYDRAULIC GATTI PRESS BRAKE

• Manufacturer: Gatti

COMPLETE WITH BLADE FOR DEEP BENDING PRISMLESS MACHINE WITH CYBELEC 2 AXIS DNC80 CNC