Used plastic molding machines

TTC2100 GAMMAFLUX "TTC-33457" GLOBAL HOT RUNNER TEMPERATURE SEQUENTIAL VALVE GATE CONTROLLER FOR PLASTIC INJECTION MOLDING MACHINE

• Manufacturer: Gammaflux

TTC2100 GAMMAFLUX "TTC-33457" GLOBAL HOT RUNNER SEQUENTIAL VALVE GATE CONTROLER FOR PLASTIC INJECTION MOLDING MACHINE - (8) valve gate outputs - 4- thermocouple power cords - touch screen computer - portable desi...

Mitsubishi MJ-2 Plastic Injection Molding Machine Operator Control Switch Panel

• Manufacturer: Mitsubishi

Mitsubishi MJ-2 Plastic Injection Molding Machine Operator Control Switch Panel Note couple knobs missing from switches. INV# P-654

Mitsubishi 90-210 Ton Plastic Injection Molding Machine Operator Switch Panel

• Manufacturer: Mitsubishi

Mitsubishi 180 Ton Plastic Molding Injection Machine Operator Switch Control Panel. 17" x 5.5" Nice high detail images on the mounting plate that would be a good upgrade to any older machine. NOTE: Image showing ...

Cincinnati Milacron VT-110-5 110 Ton Vertical Plastic Injection Molding Machine

• Manufacturer: Cincinnati

Imperial Metric Serial #: T35A0194047

MITSUBISHI Plastic Injection Molding Machine Barrel Zone Heating Control Power

• Manufacturer: Mitsubishi

“Pulled from working Mitsubishi Molding Machine” MITSUBISHI Plastic Injection Molding Machine Barrel Zone Heating Control Power Supply Board INV# P-1327

(NEW) VAN DORN Barrel End Cap 350 Ton Plastic Injection Molding Machine

• Manufacturer: Van Dorn Demag

🔥 (NEW) VAN DORN Barrel End Cap 350 Ton Plastic Injection Molding Machine 15 Holes. Female Thread for the Nozzle is about 60mm. About 5-5/8" Diameter NOTE: We think this is for a 350 Ton Press. Ask all questions ...

Sumitomo R1 Plastic Injection Molding Machine Control Panel HMI

• Manufacturer: Sumitomo

Used, in Good Working Condition. Removed From a Working Environment. Please review photos of interior, some electrical connections are not made. If this item ships as Flat Rate Freight please see details in Shipp...

TESTED Boy Plastic Molding Machine MIPRONIC H8R1 Operator Control Panel NICE

• Manufacturer: Boy

“Very Nice Condition” 🔥Boy 50 T2 Plastic Molding Machine MIPRONIC H8R1 Operator Control Panel NICE condition Ask questions if needed. INV# P-2291

Custom HDPE Plastic Brush Sanding Machine Molding Profile 4-1/2" Wide 480V 3Ph

Used, in Good Working Condition, Tested OK. This unit came out of a plastic manufacture plant. This may be the machine that puts the wood texture in the plastic. We don’t know. Has 4 motors. Top and bottom with 1...

VERSAMATIC Double Diaphragm Pump E2AA6X660 Plastic Molding Machines

• Manufacturer: VERSAMATIC

“Used - good Condition” VERSAMATIC Double Diaphragm Pump E2AA6X660

Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker on Stand #34 Plastic Molding Machines

• Manufacturer: Matsui

Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker on Aluminum Stand 208Volts, AC, 3PH 60Hz Full Load 15.4A Additional Elements of the System: Mitsubishi No-Fuse Breaker NF30-KC 3 Pole, 50-60Hz A...

2002 15.4 LB HUSKY "MTE7" 5-AXIS UNIT MOUNTED TRAVERSING PICKER ROBOT FOR PLASTIC INJECTION MOLDING MACHINE w/SERVO-DRIVES

15.4 LB HUSKY "MTE7" 5-AXIS UNIT MOUNTED TRAVERSING PICKER ROBOT FOR PLASTIC INJECTION MOLDING MACHINE NEW 2002, SERIAL NO 2450466, MODEL MTE7 EQUIPPED WITH: SERVO-DRIVES CATALOG SPECIFICATIONS: Payload Weight Ca...

Matsui Drying Hopper HDII-100, Ohikaze Blower, Mitsubishi Breaker Plastic Molding Machines

• Manufacturer: Matsui

Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker does NOT come on a stand 208Volts, AC, 3PH 60Hz Full Load 15.4A Additional Elements of the System: Mitsubishi No-Fuse Breaker NF30-KC 3 Pole, 50...

Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker Plastic Molding Machines

• Manufacturer: Matsui

Matsui Drying Hopper HDII-75R, Ohikaze Blower, Mitsubishi Breaker 208Volts, AC, 3PH 60Hz Full Load 15.4A Additional Elements of the System: Mitsubishi No-Fuse Breaker NF30-KC 3 Pole, 50-60Hz AC 220 Volts 30 Am...