Used plastics processing equipment

160 Gallon Engel Plastic Tank with Basket Filter Strainer

• Manufacturer: Engel

ITEM #: 03810 Used 160 Gallon Engel Plastic Tank with Basket Filter Strainer 44" diameter. 1/2" thick plastic walls with an additional 3/16" thick liner. Total wall thickness = 11/16". Lid is 3/16" thick. Ins...

160 Gallon Engel Plastic Tank with Basket Filter Strainer

• Manufacturer: Engel

ITEM #: 03809 Used 160 Gallon Engel Plastic Tank with Basket Filter Strainer 44" diameter. 1/2" thick plastic walls with an additional 3/16" thick liner. Total wall thickness = 11/16". Lid is 3/16" thick. Ins...

55mm Bore Reifenhäuser Plastic Pellet Extrusion Extruder

• Manufacturer: Reifenhäuser

ITEM #: 17026 Used 55mm Bore Reifenhäuser Plastic Pellet Extrusion Extruder Typ: RH-501-1-70-33-VSingle screwVented and pluggedAir cooled; Electrically heated.Suitable for HDPE and many other types of plastics. ...

Major Items Plastic Carbon Steel - IPP# 219826

• Manufacturer: Gneuss

Polymer filter continous rotary filtration system Rated 1220 SqCm active screen area, 9500 Cm/Hr capacity, 48000 watt oil/vapor heating capacity, with 2 heater zones. CS construction a RexRoth 11 KW power pack 3/...

Major Items Plastic Stainless Steel 304 - IPP# 219893

• Manufacturer: Gala

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219834

• Manufacturer: Gala

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219835

• Manufacturer: Gala

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219210

• Manufacturer: Gala

centrifugal dryer rotor speed 780 rpm dryer used for plastic pellets/granules. 6500 Kg/hr product throughput. 50 m3/hr water rate approx 2550 nm3/hr

Major Items Plastic Stainless Steel 304 - IPP# 219211

• Manufacturer: Gala

centrifugal dryer for plastic pellets/granules rated 6500 Kg/H product throughput 50 CuM/H water rate approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219212

• Manufacturer: Gala

centrifugal dryer for plastic pellets/granules rated 6500 Kg/H product throughput 50 CuM/H water rate approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219862

• Manufacturer: Gala

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput, 50 CuM/H water rate, approx 2,550 NM3/h 1440 u/m

Major Items Plastic Stainless Steel 304 - IPP# 219831

• Manufacturer: Gala

centrifugal dryer, for plastic pellets/granules rated 6500 Kg/H product throughput 50 CuM/H water rate approx 2,550 NM3/h 1440 u/m

Omega Design Unscrambler Bulk Plastic 6D-RVP-11

• Manufacturer: Omega

Omega Model 6D-RVP-11, automatic, floor level, rotary, vacuum pocket, bulk bottle unscrambler and orientator rated from 50 to 250 containers per minute – depending on materials and application. Container size ra...

Major Items Plastic Stainless Steel 304 - IPP# 225243

250-500kg/hr Maag hot melt gear pump viscosity at 10/sec 70 to 3000 Pas inlet pressure 10 bar, outlet pressure 250 bar, (4) heating cartridges (1250 Watt, 415 volt), driven by 18.5 kw, 3/50/60/380/420/480 volt, 1...