Building Filters
- Trusted Seller
1985 Sterling S-38
- Manufacturer: Sterling
- Model: S-38
Max. Head Tooling 10” 125-Hp. Extruder Drive Motor, 30-Hp. Hydraulic Clamp Motor, 3.5” Extruder, Cast Aluminum Barrel Heaters, Barber Colman Maco 6500 Machine Controls, Barber Colman Parison Programming, Ladder, ...
- Trusted Seller
Sterling SL-3
- Manufacturer: Sterling
Used Sterling LS-3 Extrusion Blow Molding Machine: Previously used for making HDPE 4 gallon, 18.9 Liter, and 20 liter jugs with the same mould and inserts added. This machine is an intermittent type of unit with ...
- Trusted Seller
Generic 30 Hp
- Manufacturer: Generic
Stock # 439267 Machine type: Plastics Machinery | Machine location: Illinois | Stock #: 439267 | 30 hp 500-volt 1750/2300 rpm d/c melt pump, sm-cyclo gearobx model chh-4190. 2: 1 Gear Ration With an Input Rpm o...
$4,500 USDChicago, IL - Trusted Seller
1999 Kreyenborg LK-SWE-730
- Manufacturer: Kreyenborg
Machine type: Plastics Machinery | Machine location: Ohio | Stock #: 809386 | -filtration area: 1,468 cm3 | -recommended throughput: 4,000 to 10,000 kg/hr | -connection flange: 250 x 345 mm | -hydraulic power un...
SEIBU GIKEN,SSCR-U,DESICCANT ROTOR NOS
- Manufacturer: Giken
What's Included? See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it will not be included with the item. 30-Day Easy Returns ...
$600 USDGalion, OH- Trusted Seller
2022 Sesotec CMN 256
- Manufacturer: Sesotec
Working Width 256mm Throughput Up To 20 KG/H Application; PET Flakes HDPE-/PP Flakes PS-Flakes Mixed Plastic Flakes 230v 50-60Hz
- Trusted Seller
Una-Dyn Solid Cone Hopper, #150, Insulated, Stainless W/Autoload OS-10 Feeder
- Manufacturer: Una-Dyn
CLICK HERE FOR MANUFACTURER'S SPECS In good used condition G55000028 TSC-150,2.5", NO HTR, std lid 150 lb. Solid Cone Hopper Autoload OS-10 Feeder, Movacolor, Volumetric Feeder,110 volt Overall height is 86" Una-...
$1,820 USDMillersburg, IN - Trusted Seller
Sonitek SU-10LB Thermal Press Heat Staking Machine Set 6 Zone PLC Control 3Ph
- Manufacturer: Sonitek
Used, in Good Working Condition. Selling as a set. Right and left. We were not able to fully test. Heating units all heat up as they should. Has PLC temp controls and sensors. Not sure on the voltage. Original ta...
$2,750 USDMillersburg, IN - Trusted Seller
1996 Cincinnati Milacron VST 33 - 1.08 OZ
- Manufacturer: Cincinnati
55 Ton, 2.97oz, Cincinnati Injection Moulding Machine: – Short circuit interrupting capacity 14000 RMS AMPS at 480 Volts – Soak timer – Up to 5 programmable speeds for Injection High and Screw RPM – Up to 11 prog...
- Trusted Seller
2007 Krauss Maffei RIM Star Compact 40/40 Metering Machine
- Manufacturer: Krauss-Maffei
Used; Krauss Maffei RIM-Star Compact 40/40, Compact high pressure polyurethane metering machine. Includes two – 60 gallon water jacketed and insulated daytanks, ASME approved and rated to 150psi. Bolt down cover...
- Trusted Seller
2010 Eva Production Lines
- Manufacturer: Eva
1. Chemical Compounding compounded in a reactor to create additives used in the formation of blending chip 2. Raw Material Handeling and EVA resin mixed in a mixer to create blending chip 3. Extruding of EVA shee...
$1,900,000 USDChicago, IL - Trusted Seller
PCI 78FB
- Manufacturer: PCI
Two (2) Rotating Blades One (1) Stationary Blade Directly Driven by a 2 HP 208-230/460 Volt 1725 RPM A/C Motor, Mounted on Frame Two Trim Inlets. S/N 71992 Trim Cutter on Unitized Frame with Sterling Model 6UHE B...
- Trusted Seller
1999 Gloucester 3-Roll Cooling Stack – 60″ x 24″ – 1999 – For Sheet Extrusion
- Manufacturer: Gloucester
60″ Gloucester Cooling and Polishing Stand (3) Nominal 24″ Diameter Chrome Plated Rolls -Mounted in a 45 degree arrangement for down stack operation. Rolls are Pneumatically Actuated. Chrome rolls are via approxi...
- Trusted Seller
Seybold Dual Head Die Press
- Manufacturer: Seybold
Retooled a year and half ago Machine type: Plastics Machinery | Machine location: New York | Stock #: 277872
- Trusted Seller
2006 ZMD International HD346SHS
- Manufacturer: International
-Estimated $1,000-$2,000 in repairs needed to provide functionality to non-functional side
