Used pressione

HILGE PANDA SUPER I S/S centrifuge pump – 6m3/h

• Manufacturer: Hilge

Motor 1.1 kW 1410 rpm 3 x 380 V Suction Ø 48 mm Discharge Ø 35 mm

PCM MR 04H12 Positive displacement pump 10 liters/hour, stainless steel

Pression: 2 bar | Motor: 0.37 kw | N/s: 245 788/1 | Technical documentation: File 1 | Stock: 2

S.S. container 1045 L

Ø 1100 mm With spray ball Height: 1000 mm | Overall height: 1850 mm | Pression: 1,5 bar | Outlet: Macon DN 25 | Stock: 2

1988 Jolt squeeze moulding machine KÜNKEL WAGNER APM-S-2

• Manufacturer: Künkel Wagner

With c ontrol box AEG Automate Logistta A020 With two-hand control desk

Soenen 2H5 200 ton

• Manufacturer: Soenen
• Capacity: 200,000 kg

Type 2H5 blank holder pressure: 80 ton blank holder stroke: 300 mm

ALFA LAVAL spiral heat exchanger 4.55 m2 - S/S 316L - type 144 SA

• Manufacturer: Alfa-Laval

2 circuits of 25 litres 4 holes DN65 Pression: 6 bars | Temperature: 200 ° C | Overall dimensions: 770 x 530 x H. 1150 mm | Stock: 1

Hardness tester WOLPERT ISSERSTEDT DIA 3b

Com N° 374 Dimensions: width 900 mm, depth 1200 mm, height (with pallet) 1800 mm With ground glass screen and ruler Ball Ø 10 mm With engine and base

Natural gas burner FULMINA, max. 180 000 calories/h

Type: GR 12H, serial number: 310256517 Year of construction: 1969, weight: ± 20 kg DVGN-An N° G937

Moulding machine OSBORN 716 R4F, table 850mm x 530mm

Weight: 1900 kg | Dimensions: width 1000mm, depth 1300mm, height 1800mm | Pression stroke: 165mm | Pression capacity: 11 500 kg | Pattern draw: 254mm | Jolt capacity: 625kg | Maximum depth of moulding boxes: 686...

Dosapro Milton Roy dosing pump type MB.140.H.40.E.8

• Manufacturer: Milton Roy

Motor 0.75 kW Inlet/outlet Ø 25 mm Output: 387 l/h max. | Pression: 8 bar max. | Outside dimensions: 1000 x 650 x H. 700 mm | Stock: 1

GEA ECOFLEX type N40 Plate s.s. heat exchanger

• Manufacturer: GEA

250 plates Stainless steel frame Volume: 258 litres | Temperature: 50 °C | Pression: 6 bars | Length: 2700 mm - Width 530 mm - Height 1820 mm | Stock: 1

PCM progressive cavity pump 0.045 m3/h type MR0.4L10 – S/S

• Manufacturer: PCM

SEW geared-motor 0.25 kW 168 rpm 400 V Flow rate: 0.045m3/h | Pression: 1 bar | Overall dimensions: 880 x 220 x Ht 300 mm | Stock: 1

ZEPPELIN rotary feeder Ø 400 mm type A1 400/43,3 DC-II - 43,3 liters

• Manufacturer: Zeppelin

Steel body Stainless steel rotor Ø 400 mm Stainless steel lower hopper with tube Ø 250 mm SEW 1.5 kW geared-motor 22 rpm 3 x 400 V

S/S heat exchanger 14,5 and 3,5 liters THERMI-CONSULT ZIEMANN 6 bars

• Manufacturer: THERMI-CONSULT

2 circuits 14.5 and 3.5 liters 4 holes DN60 - 2 x DN40 - DN25

LOWARA steel centrifugal pump 24m3/h type 2FHE 32-250/55/P

• Manufacturer: Lowara
• Model: FHE32

Flowrate 6 to 24 m3/h Motor 5.5 kW 3000 rpm 380 V