• 125 Square Feet Process Engineering And Machine Co. Shell Tube - Stainless Heat Exchanger #216251

      • Capacity: 125 SQUARE FEET / 12 SQUARE METER

      125 sq ft, 304ss tubes and sheet, cs heads and cs shell, horizontal heat exchanger. mfd by pemco, sn 3747, nb #2060. shell rated 75 psi/full vac @ 325deg f, tubes rated 75 psi @ 325 deg f. (80) 3/4" od x #13 gaug...

      No price
      West Windsor Township, NJ, USA
    • 897 Gallon Stainless Steel Tank ; Pressure #213304

      • Manufacturer: Process Engineering
      • Capacity: 897 GALLON / 3400 LITER

      897 gallon vertical 304 ss pressure tank, manufactured by process engineering, serial number 94169, national board, number 2795, rated fv/110 psi @ 100 degrees f, 66" diameter x 54" straight side, dished heads. o...

      No price
      West Windsor Township, NJ, USA
    • 83 SQ FEET USED PROCESS ENGINEERING & MACHINE CO., INC. HEAT EXCHANGER REBOILER

          national board # 3562. s/n 5863. maximum allowable working pressure: 150 psi @ 650°f. drawing and more technical data on file. manufactured by process engineering & machine co., inc.

          $9,000
          Millwood, WV, USA
        • 898 Square Feet Shell Tube - Stainless Heat Exchanger #218251

          • Manufacturer: Process Engineering serial # 84059
          • Capacity: 898 SQUARE FEET / 83 SQUARE METER

          898 sq. ft., 304 ss heads, 304 ss tubes, 321 ss shell, horizontal heat exchanger designed to mount on an incline. 24" diameter x 15' 4" overall length. with expansion joint manufactured by process engineering ser...

          No price
          West Windsor Township, NJ, USA
        • 25 CU FT PROCESS ENG PADDLE BLENDER, S/S, 2 HP

          • Manufacturer: Process Engineering
          • Capacity: 25

          used 25 cu. ft. process engineering paddle blender, model 1060245, stainless steel construction, 28" wide x 48" long trough, chain and sprocket driven with 2 hp 230/460 volt drive, (2) 3" diameter end discharges ...

          No price
          Cleveland, OH, USA
        • Process Engineering Conveyor Belt 6000161 5F2615

          • Manufacturer: Process Engineering

            incline, 16" wide x 144" long, cleated delrin belt conveyor. equipped with a 12" high infeed, 3" high guide rails, 3" high cleats on 20" centers, 60" high discharge and a 1hp drive. mounted on a stainless steel ...

            No price
            Carol Stream, IL, USA
          • Used- Process Engineering Spiral Freezer. Enclosure 27-1/2 x 22-1/2 x 13-1/2 high

            • Manufacturer: Process Engineering

              48659003 used- process engineering spiral freezer. enclosure 27-1/2 x 22-1/2 x 13-1/2 high. refrigeration package. krack unit using 404a refrigerant. spiral 27" wide belt and 600 feet belting. 13 tiers. 6-1/2" ...

              No price
              Bensenville, IL, USA
            • 17 FT. PUG MILL TAUNTON ENGINEERING #C-1391

                  17 ft. pug mill mfg. taunton engineering 10 hp, 1755 rpm, 230/460v, 3ph gear reducer 11.4 ratio, 155 rpm out carbon steel construction. (2) 10″ top inlets, 18″ x 26″ top inlet, 12″ x 26″ bottom outlet (2) 4″ diam...

                  No price
                  Rehoboth, MA, USA
                • Thomas Engineering 48-M111 7610

                  • Manufacturer: Thomas

                    used 48" thomas engineering accela cota coating pan, model 48-m111, stainless steel perforated pan, spray guns, steam heated with hepa filter, dust collector with blower, 3 hp, 230/460 process blower, control pan...

                    No price
                    Red Bank, NJ, USA
                  • Used- GEA Daiichi Viswill Tablet Video Inspection System, Model TVIS-EX3

                    • Manufacturer: GEA

                      70882038 used- gea daiichi viswill tablet video inspection system, model tvis-ex3. rated to speeds of 350,000 tablets/hr through put, dsigned to handle 5-12 mm diameter to 2-8 mm round tablets, 5-12 mm wide to 2-...

                      No price
                      Bensenville, IL, USA