Used process engineering in Japan

Ube Industries Gas Processing Facility
- Manufacturer: UBE Industries
Single type Device name: Gas processing equipment | Production no.: U-112214
Tokyo, Japan
1997 Mitsubishi Chemical Engineering 58L
- Manufacturer: Mitsubishi Chemical Engineering
Capacity:0.058m3 Class 1 pressure vessel (no data) Maximum working pressure: 30 kg/cm2 Maximum working temperature: 230°C Operation panel available Remarks Operation panel: Newly made is recommended. Others: Curr...
Hiroshima, Japan
Tikara Engineering 60 × 25 1/2 type
- Manufacturer: Tikara Engineering
Main unit, scraping unit, hydraulic unit Capacity: 610L Rotation speed: 840(600G)~970RPM(800G) During scraping: 11RPM Without control panel and filter cloth. Please contact us for availability. We can provide you...
Hiroshima, Japan
Red Bam Engineering VSP - 25P
- Manufacturer: Akitake Engineering
Powder Conveying System, Sanitary Specifications (Conveying Piping 2S) Suction volume: 2500L/hr Air drive
Hiroshima, Japan
2017 Chikara Engineering HANG48×800
- Manufacturer: Tikara Engineering
Fully automatic low-discharge type Maximum capacity 480L Rotation speed 1080rpm Centrifugal effect 796G Scraping device hydraulically driven With control panel
Hiroshima, Japan
2011 Izumi Environmental Engineering Vertical
- Manufacturer: Izumi
Tube: 25.4φ (2t) x 3000L x 165 tubes (SUS304) Body plate: 500φ (SGP-E)
Hiroshima, Japan
1989 [Chiyoda Engineering] Electric furnace No model
- Manufacturer: Chiyoda Engineering
Hot air circulation / cylinder rotation type With blower
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
22kw 4000rpm/3200G Processing capacity: 3-5m3/H Power: 22kw | Material: SUS | Quantity saved: One
Hiroshima, Japan
[Nisso Engineering] Multi-tube heat exchanger 20m²
- Manufacturer: Nisso Engineering
Heat transfer area: 20 m2 Material: Tube: STB340-SC Shell: SUS304 (bolts and nuts: SS)
Hiroshima, Japan
Tomoe Engineering P-3000
- Manufacturer: Tomoe kogyo
No spare ball gearbox for decanter Material: SUS | Quantity saved: Two
Hiroshima, Japan
[Tokyo Engineering] Filter Press TFAP7-14
- Manufacturer: Tokyo Engineering
750mm square x 7 chambers (double) Filtration area: Approx. 6m2 (estimated) Accessories: Hydraulic unit
Hiroshima, Japan
2018 Nittec Engineering B0K-01A
- Manufacturer: Nittoku Engineering
Device name: coil winding machine
Tokyo, Japan
2009 Nippori Engineering DD-40NX6-0
- Manufacturer: Nippon Polymer Engineering Co.
Treatment air volume 25m3/min
Hiroshima, Japan
[Sumitomo Chemical Engineering] Multi-tube heat exchanger 20m²
- Manufacturer: Sumitomo
Heat transfer area: 20㎡ Material: Tube: SUS304 Shell: SS400 Drawings available
Hiroshima, Japan
1992 Belltong Engineering Model KP-110-1000
- Manufacturer: Belltong Engineering
RPF Production Equipment Waste Plastic Volume Reducing Machine (PLAPACK) Parts replacement (sequencer) is required for the operation panel. With drawing, specification and instruction manual
Kure, Japan