Used processing in USA

Low Temp Chiller 771,100 kcal/h (255 Ref. Ton) - IPP# 216002

• Manufacturer: Trane

CentraVac Low temperture, Series R chiller Drive motor: 197 kW, rated for 460 volt, 3 ph, 60 Hz Requires 705 lbs Evaporator rated for 40% Glycol at 428 gpm, inlet at 33.8 degrees F, and outlet at 25 degrees F. Co...

Stainless Steel 316 Centrifuge-Lab - IPP# 239309

Centritec Cell 8 single use insert centrifuge This type of flow centrifuge is for harvesting mammalian and insect cells in a single use insert. The system offers these advantages Single use, rapid changeover disp...

Stainless Steel 304 Praj Industries Tray Column - IPP# 235302

• Manufacturer: International Process Plants

process vent scrubbing column Thirty 304L SS sieve trays, spaced at 1' each,

Major Items Plastic Stainless Steel 316 - IPP# 205767

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

2023 Despatch TFD3‑10

• Manufacturer: Despatch

Specs Weight: ~3,070 lb (shipping: ~3,270 lb) Installed Options Class A flammable solvent handling package (NFPA 86 compliant) Protocol 3™ programmable controller with Ethernet/Modbus and USB data logging Truck w...

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232767

• Manufacturer: Andritz

Duplex/317/316 stainless steel two stage pusher continuous centrifugeTwo stage pusher continuous centrifuge 5.5 ton/hour troughput of solids 10/130 degrees C cake thickness of outer basket 40mm (max) inner basket...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...

Stainless Steel 317 Andritz SZ400/2 Centrifuge-Pusher - IPP# 232766

• Manufacturer: Andritz

316 stainless steel 5.5 ton/hour troughput of solids 130 degrees C (max) inner diameter of outer basket 412mm, inside diameter of inner basket 356mm cake thickness of outer basket 41mm (max), inner basket 40mm ce...

IPP# 601964, PET Cutter System-(4) cutters-6900 kg/hr max. (ea) Polymers - Fibres and Plastics

PET Cutter System consisting of: (4) Rieter (Maag) Underwater strand pelletizers ( M-USG 900 V) vertical design (providing space savings and easy access to the cutter head) 316 SS contact Each System is Designed ...

Carbon Steel Kinney/Tuthill KDP-800 Pump-Vacuum - IPP# 221213

• Manufacturer: Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 99783

• Manufacturer: Alfa Laval

laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2"

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...

Stainless Steel 316 Joshua Greaves & Son Co. LTD. Mixer-Disperser - IPP# 706087

• Manufacturer: Joshua Greaves & Son Co. LTD.

agitated jacketed disperser system Working pressure: atmospheric Temperature range: 30 - 60 degrees C (processing), 80 degrees C (washing) Tank dimensions: approx 2400mm diameter x 2450mm straight side Internal b...