Used processing in Belgium

2007 Feeder Jensen Logic 3500mm (922)

• Manufacturer: Jensen

CBA Machines can now offer this Jensen Logic feeder 3500mm year 2007. Many parts have been changed earlier this year (2025), it has got new servo drives, a new touch screen and interface module, new B&R cards. It...

CBM sandwich panel line / Manni & Cannon

• Manufacturer: Manni

Rolvormlijn voor het maken van panelen: - voor thermische isolatie van industriële gebouwen - voor sectionaaldeuren (huidige configuratie) - voor isolatie van residentiële daken De uitrusting bestaat uit: 1 - Af...

2006 Feeder Jensen Logic 77 - 3500mm 1-2-4 lanes (820)

• Manufacturer: Jensen

CBA Machines can now offer this Jensen Logic 77 feeder 3500mm year 2006 with B&R controls, 3 feeding stations, 1-2-4 lane feeding, manual vacuum feeding for small pieces. Immediately available from our warehouse ...

2003 Feeder Jensen Basic 3300mm

• Manufacturer: Jensen

CBA Machines can now offer a Jensen Basic Feeder 3300mm from 2003, immediately available from our warehouse in Malle, Belgium.

Hindenlang TPESM-600 - Induction oven

• Manufacturer: Hindenlang

Hindenlang TPESM-600 - Induction oven Kind of: Induction furnace | Max temperature: 850° | Capacity: 750 x 900 mm x 550 kg | Power needed: 69 kW | Voltage: 400 V / 100 A

H&C Fours 400°C 1000 x 1100 x 1000 mm

• Manufacturer: H&C Fours

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 700 °C | Power needed: 42 kW - 95 A | Voltage: 400V 3 phase

H&C Fours 400°C 1000 x 1100 x 1000 mm

• Manufacturer: H&C Fours

H&C Fours 400°C 1000 x 1100 x 1000 mm Max temperature: 700°C | Power needed: 42 kW - 95A | Voltage: 400V 3 phase

2017 THIES LUFT-ROTO PLUS

• Manufacturer: Thies

Jet THIES type LUFT-ROTO PLUS SII 140/2 "LFB", year of construction 2017, capacity 500kgs, 2 ropes, programmer SEDOMAT 5500.

POLYBOIS RAV 48 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

POLYBOIS RAV 34 Feeder

• Manufacturer: polybois

Machine number: Tension: 400V 50Hz 3Ph

2-ZAK Stand-alone dust extractor

Diameter bags 500mm Diameter suction 120mm Motor 2,2kW Machine number: Year of construction:

1995 VENTOMATIC TEC/T/30 PK Stand-alone dust extractor

32 sleeves, each with diameter 30 cm Capacity approx. 10000 m3/h Built-on fan, motor 22 kW, inlet 400 mm. 8 x bag diam. 600 mm Machine number:

2005 HYMMEN TLT Glue spreader

• Manufacturer: Hymmen

Working height 900mm Nominal width 1400mm Effective working width 1370mm Rolling pressure force max 5kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plate...

2005 HYMMEN KRP 1300 Sandwich panel press

• Manufacturer: Hymmen

Working height 900mm Nominal width 1300mm Effective working width 1270mm Rolling pressure force max 40kN Passage height max 120mm Feed transport 6-50 m/min stepless/frequency controlled Plate width min 200mm Plat...

1992 HACKEMACK KTR 2040 Drying equipment for stain and lacquer

• Manufacturer: Hackemack

UV dryer 1 lamp Cross bar transport Working width: 1.3 m. Number of units: 1 Total power: 12.2 kW UV dryer 5 lamps Cross bar transport Working width: 1.3 m. Number of units: 5 Total power: 62.4 kW shared electric...