Building Filters
- Trusted Seller

Graco L-S20 5 Gallon
- Manufacturer: Graco
Machine type: Process Equipment | Machine location: California | Stock #: 482427 | Material container volume: 5.3 gal | Maximum air inlet pressure: 125 psi | – maximum flow rate: 1.6 GPM | – min flow: 1.6 GPM | ...
- Trusted Seller
2018 Pebco PCC-29-20
- Manufacturer: Pebco
Machine type: Process Equipment | Machine location: Upon Request | Stock #: 093274 | -material flow rate: 5,000 tons/hr | -diverter: 20″ Single Blade | -dimensions of diverter: 40 1/2″ x 16″ x 21 3/8″ | -weight ...
- Trusted Seller
1980 Morgan-Press G-100T
- Manufacturer: Morgan
- Model: G-100T
Morgan-Press G-100T Injection Molding Machine, 1980 1625 Watts
- Trusted Seller

2022 Roth MFM2S
- Manufacturer: Roth
Equipped With: Beckhoff Industrial PC Control System Quick Change Blade Design Automatic Pleating Height Adjustment Linear Top and Bottom Blade Automatic Platform Setting Change On the Go Top Gap – Bottom Gap Inp...

Tiger Depack HS-30 Depackager
- Manufacturer: Tiger Depack
The Tiger HS-30 Depackager helps you recover food waste costs by separating organic waste from inorganic packaging and turning food waste into cash flow. In a small, stationary footprint, the Tiger HS-30 can feed...
Avon, OH- Trusted Seller
2019 Apexs 2000-5LX20LD
- Manufacturer: Apexs
Extraction Vessel • Volume – 40L vessel holds around 20 pounds of dry, ground material • Pressure – maximum pressure = 2000 psi (137 bar) • Temperature – max 160F (71C) • Materials – 304 stainless steel. Vessel i...
- Trusted Seller

Wabash PC50-2418-4TM
- Manufacturer: Wabash
Machine type: Process Equipment | Machine location: California | Stock #: 631604 | -compression tonnage: 50 Tons | -compression cyl.: 7×7 | -platens: 24″ x 18″ Electric Heated, 9600 watts | -motor hp: 3 HP | -el...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 669251 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted Seller

2005 Alfa Laval LATEX 2000
- Manufacturer: Alfa-Laval
- Model: LATEX 2000
Machine type: Process Equipment | Machine location: Arizona | Stock #: 442663 | -capacity: Up to 650 Liters per Hour | -bowl speed: 7269 RPM | -motor shaft: 1500 RPM | -max field density: 1100 kg/m3 | -max sedim...
- Trusted SellerAuction

Mac Tools Mentor Scan Tool
As Is, Where Is Mac Mentor Scan Tool. Software 3.0, Domestic, Imports covered up to 2008. See Photos. Powers on, Scans, Internal Battery is dead, but it works off of power to the OBD2 port. As-is, Where-is. No sh...
Lebanon, OHVisit Auction Website - Trusted Seller

West Salem Machinery 4260S
- Manufacturer: West Salem Machinery
-300 HP -Direct Drive Motor with 60″ Wide VFD Panel -3HP HYD Power Pack -Top Loading Infeed Chute -42″ Rotor Diameter Drawing Available
- Trusted Seller
Simpl Seal Simpl Seal II 251300C
- Manufacturer: Simpl Seal
Key Specifications: Machine type: Process Equipment | Machine location: Kentucky | Stock #: 514581 | Curing width: 25 inches | Curing height: 13 inches | Lamp type: Mercury vapor UV lamp | Lamp power: 300 watts p...
- Trusted Seller

Amtech ATC-4400
- Manufacturer: Amtech
Machine type: Process Equipment | Machine location: Pennsylvania | Stock #: 487859 | -motor: 50 HP | -cfm: 8000-12500 | -dust drum: 55 Gal | -electrical requirements: 280/460V, 3P, 60Hz | -dimensions: 82.5″ x 53...
- Trusted Seller

PLASTIC PROCESS EQUIPMENT Material Loader Used
- Manufacturer: PLASTIC PROCESS EQUIPMENT
Buyers are welcome to inspect equipment prior to purchase. Expedited shipping services are available upon request. This piece is located at Ideal Machinery, Inc. on our showroom floor. Located at: 10230 N. Hol...
$550 USDHolly, MI - Trusted Seller
2007 Kaeser TD 61
- Manufacturer: Kaeser
- Model: TD 61
Used Kaeser TD 61 Refrigerant Compressed Air Dryer, 2007: – 3 Ph – 60Hz
$3,900 USDChicago, IL 
Marel MS 2730 Fish Processing
- Manufacturer: Marel
- Model: MS 2730
Good condition Marel MS 2730 Fish Processing available between 2012 and 2014 years. Located in United Kingdom and other countries. Click request price for more information.
United Kingdom
