Used processing in chugoku

Chemical Processing 1/4 Hp Steam Generator - Lg-30

• Manufacturer: Chemical Processing

Wheels, (200#) 29x24x30, (8#) 13x8x8, *contains 2 Pieces

Surplus 1.5" Schenck Process MechaTron Stainless Gravimetric Weigh Screw Feeder

• Manufacturer: Schenck

ITEM #: 21121 Surplus 1.5" Schenck Process MechaTron Stainless Gravimetric Weigh Screw Feeder Serial # 1100435815-70A-MIDMECHContact Materials: 304 & 316 SS, FDA Approved Vinyl, HDPE, NylonInstalled with two 300K...

Schenck Process Belt Weighfeeder Weigh Belt Loss in Weight Feeder

• Manufacturer: Schenck

ITEM #: 20010 Used Schenck Process Belt Weighfeeder Weigh Belt Loss in Weight Feeder Weigh belt is 10.37" wide X 32" long, made of white sanitary vinyl, 3.5" side guides.Stainless steel housing (23.5"W X 48"L) wi...

Dukane 4070ln2e-l2 4070 Dynamic Process Controller Dpcii - 4070ln2e-l2

• Manufacturer: Dukane

Used, Untested Name: Dukane 4070ln2e-l2 4070 Dynamic Process Controller Dpcii | Arrival date: 10-16-2025 | Dimensions l x w x h (inches): 25 x 25 x 13 | Weight (lb.): 38 | Available quantity: 1

Chromalox Electric Process Air Duct Heater w/ Housing - 5kW

• Manufacturer: Chromalox

ITEM #: 18885 Used Chromalox Electric Process Air Duct Heater w/ Housing - 5kW Welded mild steel heater plenumInstalled Chromalox ADHT series 5kW electric heating elementPlenum length between line connections: 35...

Heat and Control 58"W Minuteman Accumulation Conveyor CV-BT Food Processing

• Manufacturer: BT

ITEM #: 19204 Used Heat and Control 58"W Minuteman Accumulation Conveyor CV-BT Food Processing Sanitary vinyl seamless belting on a free-standing stainless steel frameSyncronized fill and discharge rates or fill ...

Chromalox Industrial Electric Process Air Duct Heater w/ Housing - 10kW

• Manufacturer: Chromalox

ITEM #: 18886 Used Chromalox Industrial Electric Process Air Duct Heater w/ Housing - 10kW Welded mild steel heater plenumInstalled Chromalox ADHT series 10kW electric heating elementPlenum length between line co...

MAC Process Stainless Steel Side Entry Filter Receiver Model 24CSER3

• Manufacturer: MAC Equipment

ITEM #: 21296 Used MAC Process Stainless Steel Side Entry Filter Receiver Model 24CSER3 Serial No: 1100258551-010-1Stainless steel sanitary construction with horizontal cartridge filters in a Cleanable Side Entry...

3" Schenck Process MecaTron Stainless Steel Gravimetric Feeder

• Manufacturer: Schenck

Feeder Type: MODMS-1G-2A Coni-Steel® type hopper with a 5 cu/ft capacity, clamp-on cover. 3/4HP vertical agitator, split design for easy removal (10RPM). Weigh system with two-point 300KG load cells and a summing...

Plast5ic Process Equipment, Inc FX-100460, MFT0754C (x2), TAL-15UFX, DH-120USD

• Manufacturer: Plast5ic Process Equipment, Inc

Equipment Overview This auxiliary line package from Plastic Process Equipment Inc. consists of five integrated components for supporting plastic injection molding or extrusion production lines. The system include...

Lot of (6) DataMax DMX-REW1 Label Rewinders, New in Box

Lot of (6) DataMax DMX-REW1 Label Rewinders, New in Box. See photos for details. Condition unknown, items are not tested prior to auction. Interested bidders should schedule a site-visit to inspect item condition...

3" Schenck Process MecaTron Stainless Steel Gravimetric Screw Feeder

• Manufacturer: Schenck

Feeder Type: MODMS-1G-2A Coni-Steel® type hopper with a 24" extension and cover, 15 cu/ft nominal capacity. 3/4HP vertical agitator, split design for easy removal (10RPM). Weigh system with two-point 300KG load c...

3" Schenck Process MecaTron Stainless Steel Gravimetric Screw Feeder

• Manufacturer: Schenck

Feeder Type: MODHC-1G-2A Coni-Flex® type hopper and a 30 cu/ft hopper extension with clamp-on cover. 1HP drive for the flex hopper/massager. Weigh system with three-point 10kN load cells and a signal trim enclosu...

3" Schenck Process MecaTron Stainless Steel Gravimetric Screw Feeder

• Manufacturer: Schenck

Feeder Type: MODHC-1G-2A Coni-Flex® type hopper and a 30 cu/ft hopper extension with clamp-on cover. 1HP drive for the flex hopper/massager. Weigh system with three-point 10kN load cells and a signal trim enclosu...

Plastic Process Equipment FX-100460

• Manufacturer: Plastic Process Equipment

Machine type: Process Equipment | Machine location: Utah | Stock #: 566483 | – air flow: 100 CMH | – dewpoint: -40C | – drying blower: 0.75kW | – drying heater: 6kW | – regen. blower: 0.18kW | – regen. heater: 4...